All regulator boards were tested for over 12 hours before shipping.

Step Up Version.

Output Current is no less than 200mA.

Output Ripple and Noise: Maximum RMS 300mV @ 12V, 0.2A output.

Maximum Input Voltage: 12V.

Suggested Input Voltage: +5V ~+12V.

Output Adjustable Between: +7~+24V DC.

Operation Environment Temperature Range: 0~+55℃.

Storage Environment Temperature Range:-25~+85℃.

Notice:

• GND of the board should be connected to GND or the housing of your instrument.
• Input voltage must be 2V or even lower than output voltage.
• If the load is too heavy, the output voltage may be less than expected voltage.

Suggested connection is shown in Figure 1.

Figure 1 (View from potentiometer installation side)