METRA XSVI-1784
2008 DODGE SPRINTER INTERFACE HARNESS
KEY FEATURES
In the dodge vehicles listed on back there are no 12
Volt accessory wires currently in the factory harness
Making the installer run an accessory wire to the fuse
Box or underneath the steering column when installing
An aftermarket radio. The xsvi-1784 is designed to
Provide a 12 volt 10 amp switched accessory output
Along with the rest of the wires needed to install an
Aftermarket radio. The r.a.p. (retained accessory
Power) function, where power is supplied to the radio
After the ignition is shut off until one of the front doors
Are opened, is retained by the xsvi-1784.
Initialize the xsvi interface before turning
On radio: with all connections made and harnesses
Connected to the vehicle, turn ignition key
To the on position for thirty seconds, then turn key
Off.
Wiring the xsvi-1784: wiring up the xsvi-1784 is
Like wiring up any other wire harness that would
Attach to the aftermarket radios harness. The
Metra/eia wire code can be found on the back of this
Package that will aid you in the wiring of your aftermarket
Radio.