 |   |  |  |  | | Item Specifics - Welders | | | Brand: | Miller | | Power Source: | 110/120V Electric, 208/240V Electric, 440/460V Electric | | | Multi-Process: | -- | | Current Type: | Either | | | Processes: | Arc, Stick, TIG | | Condition: | New | |  | |
|
| |
|  |
|  |  |

 |
 |
|
 
YOUR SOURCE FOR WELDING SUPPLIES WELDING EQUIPMENT - SAFETY SUPPLIES ARCAIR SLICE PACKS - LENCO SPOT AND MORE
___________________________________________________
Miller Dynasty 200 DX Series.
AC DC TIG STICK WELDER
PART # 907 099 011
Includes the Contractor Kit
195 054 w/Foot Control
BRAND NEW
FREE SHIPPING IN THE 48 STATES
Maximum flexibility -- Miller Electric combines advanced inverter technology with Auto-Line technology offering the most flexible AC/DC TIG Stick power supply in the welding industry. |
Features:
- Advanced Squarewave arc for improved weldability on aluminum and magnesium using low power. Continuous high-frequency is not needed because of the advanced Squarewave arc, and extended balance control allows you to fine tune the duration of the electrode negative portion of the cycle from 30 to 90%. This provides precise cleaning control and prolonged tungsten life.
- AC frequency control range of 20 - 250 Hz. provides control for a focused arc, resulting in better directional control to help produce desired arc/weld bead characteristics.
- Built-in pulser reduces heat input; adds arc stabiility (DX model only).
- Fan-On-Demand cooling system only operates when needed.
- Auto-Line provides state-of-the-art flexibility by automatically connecting to 120 - 460 VAC, single or three phase power without removing the covers to relink the power source.
- Portable in the shop or at the job site -- at 45 lb the unit is easily moved from location to location.
- Superior TIG/Stick arc performance on all input voltages. Even on the difficult-to-run electrodes like E6010.
- Low OCV Stick is a simple design that reduces open-circuit voltage to 13 volts when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.
- Inverter-based, AC/DC power source has state-of-the-art operator interface allowing the user extra set-up capabilities in a compact machine. Features more precise control of output parameters.
- HF arc starting provides non-contact arc starting that eliminates tungsten or material contamination.
- Lift-Arc start provides TIG arc starting without use of high frequency.
- Programmable HF start parameters allows the operator to independently set HF starting conditions based upon process or application.
- Extended Balance Control range (30 - 90% EN) allows precise cleaning control and prolonged tungsten life.
- Contractor Kit includes: Protective Case with carrying handle, DB1725R (25 ft) TIG torch, RFCS-14 HD foot control, International Style Torch Adapters, Regulator/Flowmeter, 200A Electrode Holder with 15 ft cable, 300A Work Clamp with 15 ft cable, 12 ft Gas Hose, AK-2 Torch accessory kit, Gas hose coupler.
Process:
- TIG ( GTAW ).
- Pulsed TIG ( GTAW-P ) with DX models.
- Stick ( SMAW ).
Model Available:
- Dynasty 200 DX: When the job demands greater control the DX provides pulse on/off, pulse frequency, peak % time, background amperage, initial amperage, initial slope time, final slope time and final amperage control.
Accessories: EXTRA
- Adapter Cord: 1 ft (305 mm) cord with 14-pin plug to 5-socket receptacle for use with 5-pin remote controls. Part # 041947.
- Coolmate 4 115 VAC: The best performer in its class. The tough, one-piece case is portable and rustproof. A carrying handle and filler spout are molded into the case. Cools torches and guns rated up to 600 amps. Part # 042288.
- PC-300 Pulsed TIG (DC GTAW) Control: Can be used with AC or DC welding power sources with, or without, built-in HF or with external HF units (HF-251D-1 or Snap Start II). Non-inverter power source uses 0.5-20 pulses-per-second. Inverter power sources uses 0.5-20 or 10-300 pulses-per-second. Part # 042297.
- International-Style Connector Kit - 50 mm: Accepts #1 or #2 AWG cable size. Kit includes one International-style male plug which attaches to the work and/or weld cables and plugs into the International-style receptacles on the power source. Part # 042418.
- Extension Kit for International-Style Cable Connectors - 50 mm: Accepts #1 or #2 AWG size cable. Used to adapt or extend weld and/or work cables. Kit includes one male International-style plug and one in-line female International-style receptacle. Part # 042419.
- International/Tweco Adapter: A one-piece adapter which has an International-style male plug (to power source) on one end and a female Tweco receptacle (for weld cable connection) on other end. Part # 042465.
- International/Cam-Lok: A one-piece adapter which has an International-style male plug (to power source) on one end and a Cam-Lok receptacle (for weld cable connection) on other end. Part # 042466.
- International-Style Connector Kit - 70 mm: Accepts #1/0 or #2/0 AWG cable size. Kit includes one International-style male plug which attaches to the work and/or weld cables and plugs into the International-style receptacles on the power source. Part # 042533.
- Extension Kit for International-Style Cable Connectors - 70 mm: Accepts #1/0 or #2/0 AWG size cable. Used to adapt or extend weld and/or work cables. Kit includes one male International-style plug and one in-line female International-style receptacle. Part # 042534.
- XMT Cylinder Cart: Has adjustable handles and is slanted for convenient access to power source front panel controls. Carries two 160 lb (72.6 kg) gas cylinders, or one gas cylinder and a Coolmate V3 for TIG (GTAW) welding. Feeder mounted to tray above power source. Part # 042537.
- Universal Cart and Cylinder Rack: Accommodates gas cylinder up to 56 in (142.2 cm) high measuring 6 to 9 in (15.2 to 22.8 cm) in diameter. Provides Storage for auxiliary items such as electrodes, helmets gloves, etc. Part # 042934.
- Coolmate 3 115 VAC, 50/60 Hz: For use with water-cooled torches rated up to 600 amps. Unique paddle-wheel indicator, external filter and easy-fill spout. Part # 043007.
- Coolmate 3 230 VAC, 50/60 Hz: For use with water-cooled torches rated up to 600 amps. Unique paddle-wheel indicator, external filter and easy-fill spout. Part # 043008.
- Coolmate V3: For use with water-cooled torches rated up to 500 amps. Vertical design conveniently mounts to Miller cylinder rack in place of one cylinder. Part # 043009.
- RFCS-14 Remote Foot Control: Foot pedal provides remote current and contactor control . Includes 20 ft (6 m) cord and 14-pin plug. For all Miller solid-state power sources after serial number JK674521. Part # 043554.
- RCCS-14 Remote Contactor and Current Control: Up-and-down rotary-motion fingertip control fastens to TIG torch using two Velcro® straps. Includes 26.5 ft (8 m) control cord. Great for applications that require a finer amperage control. Part # 043688.
- Low-Conductivity Antifreeze/Coolant: Sold in multiples of four 1-gallon plastic bottles. Miller coolants contain a base of ethylene glycol and deionized water to protect against freezing to -37°F (-38°C) or boiling to 227°F (108°C). Also contains a compound that resists algae growth. Part # 043810.
- Deluxe Carrying Cart and Cylinder Rack: For Dynasty 300 Series and Maxstar 300 Series - Accommodates inverter power source, cooler, and one gas cylinder. Includes bottom drawer for miscellaneous items. Part # 043867.
- Extension Cords for Remote Controls and 24 VAC Wire Feeders, 25 ft: For 14-pin remote controls/24 VAC wire feeders. 14-pin plug to a 14-pin socket. (Not for XR, Optima™, or 60M series feeders.) Part # 122973.
- Extension Cords for Remote Controls and 24 VAC Wire Feeders, 50 ft: For 14-pin remote controls/24 VAC wire feeders. 14-pin plug to a 14-pin socket. (Not for XR, Optima™, or 60M series feeders.) Part # 122974.
- Extension Cords for Remote Controls and 24 VAC Wire Feeders, 75 ft: For 14-pin remote controls/24 VAC wire feeders. 14-pin plug to a 14-pin socket. (Not for XR, Optima™, or 60M series feeders.) Part # 122975.
- RMLS-14 Switch: Momentary- and maintained-contact rocker switch for contactor control. Push forward for maintained contact and back ward for momentary contact. Includes 26.5 ft (8 m) cord and 14-pin plug. Part # 129337.
- RHC-14 Hand Control: Miniature hand control for remote current and contactor control. Dimensions: 4 x 4 x 3-1/4 in (102 x 102 x 82 mm). Includes 20 ft (6 m) cord and 14-pin plug. For all Miller solid-state power sources. Part # 129340.
- RCC-14 Remote Contactor and Current Control: Side-to-side rotary-motion fingertip control fastens to TIG torch using two Velcro® straps. Includes 26.5 ft (8 m) contol cord and 14-pin plug. Great for production or contractors that need quick ramp-up. Part # 151086.
- RMS-14 On/Off Control: Rubber-covered push button dome switch. Ideal for repetitive on-off applications. Includes 26.5 ft (8 m) cord and 14-pin plug. Part # 187208.
- Kit, HD: Kit includes: Protective Case with carrying handle, DB1725R (25 ft) TIG torch, RFCS-14 HD foot control, International Style Torch Adapters, Regulator/Flowmeter, 200A Electrode Holder with 15 ft cable, 300A Work Clamp with 15 ft cable, 12 ft Gas Hose, AK-2 Torch accessory kit, Gas hose coupler. for RFCS-14(043554). Part # 194743.
- RFCS-14 HD Foot Control: For all Miller solid-state power sources AFTER serial #JK674521. New design increases stability with a larger base and a heavy 20 ft cord that can exit the front, back or either side of the pedal. Provides remote current and contactor control. 14-pin plug. Part # 194744.
Machine Specifications
Model Stock Number |
Welding Mode |
Input Power |
Rated Output |
WeldingAmperage Range |
Max. Open Circuit Voltage |
Amps Input at Rated Load Output, 50/60 Hz. |
Dimensions |
Net Weight |
| 120 V |
230 V |
400 V |
460 V |
KVA |
KW |
Dynasty 200 DX (# 907 099-011) |
TIG (GTAW) |
Three Phase |
200 A at 18 V, 20% Duty Cycle |
1 - 200 (1 - 150 on 120 VAC) |
80 VDC 5 - 10* |
--- |
13.7 |
8.7 |
6.9 |
5.5 |
5.2 |
H: 13 1/2" ( 343 mm )
W: 7 1/2" ( 191 mm )
D: 21 1/2" ( 546 mm ) |
45 lbs ( 20.5 kgs ) |
| 150 A at 16 V, 60% Duty Cycle |
--- |
9.4 |
6.0 |
4.7 |
3.8 |
3.6 |
Single Phase |
150 A at 16 V, 60% Duty Cycle |
--- |
15.8 |
--- |
7.9 |
3.6 |
3.6 |
| 140 A at 15.6 V, 40% Duty Cycle |
31 |
--- |
--- |
--- |
3.6 |
3.5 |
| 100 A at 14 V, 100% Duty Cycle |
20.7 |
--- |
--- |
--- |
2.3 |
2.3 |
Stick (SMAW) |
Three Phase |
200 A at 28 V, 20% Duty Cycle |
1 - 200 (1 - 105 on 120 VAC) |
80 VDC 5 - 10* |
--- |
20.8 |
13 |
10.2 |
8.1 |
7.8 |
| 130 A at 25.2 V, 60% Duty Cycle |
--- |
12.3 |
7.6 |
6.0 |
4.8 |
4.6 |
Single Phase |
130 A at 25.2 V, 60% Duty Cycle |
--- |
20.0 |
--- |
10.0 |
4.7 |
4.7 |
| 100 A at 24 V, 60% Duty Cycle |
31.3 |
--- |
--- |
--- |
3.6 |
3.5 |
| 90 A at 23.6 V, 100% Duty Cycle |
27.6 |
--- |
--- |
--- |
3.2 |
3.2 |
__________________________________________________________________________________________________________&n |
B & R WELDER REPAIR SERVICE INC. 4412 SOUTHERN BUSINESS PARK DRIVE WHITE PLAINS, MD 20695 800-783-3073 FAX 301-934-3057 Hours : Mon-Fri 8-5 Sat 9-12 EST Email questions to : brwelder@radix.net
ABOUT THE SELLER

OUR SELLING POLICIES
|
| Payment |
Paypal, money orders, cashier , certified and personal checks, all major credit cards. Payment requested within 3 days of purchase.If you mail a check or money order please call us at 800-783-3073 ad let us know it is being sent. Personal Check will take 14 days to clear
|
| Fees |
Maryland sales tax of 5 % charged on all orders shipped to or picked up in Maryland. |
| Shipping |
Most items include free shipping to 48 states, check listing for the FREE SHIPPING. . Large welders require truck shipment to your door. You must get them off the truck.We can arrange for a lift gate if you request it. A daytime phone number is required .Some one must be there for truck freight deliveries. We ship all items under 150# UPS or FexEx ground service. You can choose 2nd day or next day at additional charge, send email or call for cost. WE DO SHIP VIA USPS for some small items and to an APO box which there is a $ 15-$ 25 surcharge on all items. We will not ship to a freight fowarder unless a wire transfer , certified check, money order is given, no credit cards on orders to freight fowarders or third party shippers.
|
| Delivery |
We will usually ship your item the same day or next business day after receiving payment. Some weekend and holiday purchases may go out on Monday or Tuesday do to heavy volume. You will be notified immediatly if your item is on back-order. Some listing clearly list lead time for delivery, read carefully. Miller Helmets are sent from Miller Second Day Air, they may go out the same day as the order depending upon Miller backlog that day. We cannont guarantee you will get the helmet within 3 days of the order date as weekends do not count, there is a 1-2 day processing time and backorders which are not in our control.
|
| Refunds & Returns |
Our general policy is NO RETURNS. Many of our items are very heavy, shipping is expensive for us. We list and sell exactly what we list. We feel there is no reason to accept returns unless damaged in shipment. We insure all shipments internally. You can always call and we can discuss returns for reasons other than damage.EXCHANGES AND RETURNS SUBJECT TO UP TO A 25% RE-STOCK ,PLUS OUTBOUND SHIPPING CHARGES AND RETURN SHIPPING CHARGES.
|
| Contact Me |
Email brwelder@radix.net Phone 800-783-3073 5 DAYS A WEEK 8:00 AM - 5:00 PM EST And Sat 9-12. Some questions and special shipping requirements may take a day or so. We try to return all calls during business hours within one hour or less. Emails sometimes can take a little longer, but will be answered as fast as we can. |
Warranty - All warranties are thru the manufacturers. We will help you with calling the manufacturer or receipts. We are not responsible for down time or loss of use. On helmet warranties the customer must send the defective lens to us and the customer is responsible for the return shipping cost back. stwithpolicies | |


We expect payment within 3 days. If paying by money order or cashiers check we expect them to be mailed within 3 days and to be notified. We suggest Priority Mail. WE USUALLY SHIP THE NEXT BUSINESS DAY AFTER PAYMENT RECEIVED, SAME DAY IN SOME CASES. . All items are covered by Manufacturer warranties.. We will help you with any warranty issues. Small items shipped by UPS , FEDEX or USPS ground, unless you choose 1st or 2nd day air at additional charge. Larger welders are shipped via common carrier of our choice. We get it to your door.There are no additional charges for lift gates if we are notified this is needed at the time of the order . We strive to always have stock available for shipping, but from time to time stock-outs may occur.. Some welders are not stock items and will be ordered from manufacturer when paid for. It usually takes only a 1-4 days to ship to you. Some are shipped direct from manufacturer. WE INSURE ALL SHIPMENTS . NO RETURNS UNLESS DAMAGED IN SHIPMENT OR AGREED UPON RE-STOCKING AND SHIPPING CHARGES PRIOR TO RETURN.. EXCHANGES ONLY WHEN AGREED BEFORE RETURNING. EXCHANGES AND RETURNS SUBJECT TO 25% RE-STOCK PLUS OUTBOUND SHIPPING CHARGES AND RETURN SHIPPING CHARGES. ALL PRODUCTS COVERED BY MFG. WARRANTIES . NO RETURNS--SELLER NOT RESPONSIBLE FOR ITEMS DAMAGED IN SHIPPING, WHILE INSURED THIS IS FOR LOST ITEMS. ITEMS ARE PACKAGED WELL AND SHOULD ARRIVE UNDAMAGED. NO RETURNS FOR ANY REASON. READ LISTING CAREFULLY FOR POWER REQUIREMENTS. |
|
ABOUT THE SELLER |
 |
| Paypal: |
Paypal is preferred payment method. We accept all major credit cards, certified checks , money orderes and personal checks. Personal checks take 2 weeks to clear. On out of the country orderes we only accept wire transfers. Please call for our banking info.
|
| Credit Cards: |
Call 800-783-3073, 8:00 AM to 5:00 PM EST 5 days a week to use all major credit cards. I |
| Personal Check: |
Personal checks take 2 weeks to clear
|
| Money Order/Cashiers Checks: |
We accept these, please notify that you are using this method and mail within 3 days of auction end. |
| Other: |
We will ship to other countries but we only accept wire transfers, please call 301-870-3252 or email us at brwelder@radix.net
| |

| l
|
Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.
|
|
|  |