|
|
 
YOUR SOURCE FOR WELDING SUPPLIES SAFETY SUPPLIES - TORCH SETS ARCAIR SLICE PACKS - LENCO SPOT WELDERS AND MORE |
Miller Millermatic 180 Autoset Welder
Economy cart
Brand New
Part # 907312011
Free Shipping in the 48 States
|
|
The Millermatic® 180 AS is perfect for light fabrication, garage/body shops, auto body, and at home. It welds material 24 gauge to 5/16 inch. This all-in-one MIG machine has infinite voltage control with wire feed speed tracking for easy operator control. Runs on 230 Volt input power to go wherever you need to weld!
The Millermatic 180 mig welder with Auto-Set offers all the benefits of the standard Millermatic 180, but adds Auto-Set to eliminate the guesswork. Use Auto-Set when you want the speed, convenience and confidence of pre-set controls. Simply set the wire diameter, set the material thickness, and go! The Auto-Set control automatically sets your welder to the proper parameters. It is available when welding mild steel with solid wire and only works with .024 and .030 solid wires and C25 shielding gas (75% Argon, 25% CO2).
When not within the Auto-Set profiles, use the manual mode to set the weld parameters you desire. The parameter door chart lists voltage and wi |
Features:
- INFINITE VOLTAGE CONTROL with Manual On/Off WIRE FEED SPEED TRACKING provides a broader operating range with finer control by automatically increasing or decreasing wire feed speed when voltage is adjusted.
- NEW Smooth Start patent-pending technology provides a smooth spatter-free start .Its the best starting machine in the small MIG machine catagory . No pop gun starts and no spatter to clean up.
- NEW! Auto-Set is a breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG, minus the guesswork!
- DURABLE CAST ALUMINUM FEEDHEAD incorporates dual groove quick-change drive rolls and spring-loaded tension arm with calibrated tension knob all designed to make set up easier and faster.
- SEMIAUTOMATIC CONSTANT VOLTAGE WIRE WELDING PACKAGE is capable of welding 24 gauge - 3/16 in (0.8 - 4.8 mm) mild steel.
- STANDARD BUILT-IN SOLID STATE CONTACTOR CIRCUIT makes wire electrically "cold" until trigger is pulled. Makes the unit safer, and is easier to position torch to work before starting to weld.
- USES 4 or 8 in SPOOLS and can be set up to weld with wire sizes .024 - .030 in mild/staninless steel and .030 -.035 in flux cored.
- Add the Spoolmate™ 3035 spool gun and SGA spool gun adapter for welding with .030 (0.8 mm) aluminum wire on 14 gauge to 1/8 in material.
- Easy access to output studs provides CONVENIENT POLARITY CHANGEOVER when changing from solid or flux cored wires.
- Built-in Contactor - For your safety, our built-in contactor makes wire electrically "cold" when not welding.
- Short Circuit Protection - Contact tip life is extended by the exclusive Miller short-circuit protection which easily resets with the release of the gun trigger.
- Thermal Overload Protection - Internal components are protected from damage by thermal overload protection which automatically shuts down the unit if duty cycle is exceeded or air flow and cooling are restricted.
- Miller's exclusive "Tip Saver" - Short circuit protection shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at torch.
|
Process:
- MIG ( GMAW ).
- Flux Cored ( FCAW ), (gas and self-shielded).
|
Comes Complete With:
- 10 ft (3 m), M-10 Miller MIG gun and cable assy.
- 10 ft (3 m) work cable and clamp.
- 6 ft power cord
- Factory-installed gas solenoid valve.
- Smith Argon and AR/CO 2 Mix Regulator and gas hose.
- Power cord with plug.
- Extra contact tips.
- Spool of Hobart .030 solid wire
- 2 .024 contact tips
- 2 contact tips for .030 wire
- Dual groove quick-change drive rolls for .024 or .030/.035 wire
- Information / settings chart.
- Set-up and operation video.
- Material Thickness guide
- Miller Economy cart
|
| Rated Output |
Amperage Range |
Max. Open Circuit Voltage |
Amps Input at Rated Output, 60 Hz. |
Wire Feed Speed |
Wire Type and Diameter |
Dimensions |
Net Weight |
| 230 V |
KVA |
KW |
|
30 - 190 |
31 |
|
|
|
90 - 700 IPM ( 0.5 - 15.2m/min )
100-725 IPM
(at no load) |
Solid Steel: .023 - .030 (0.6 - 0.8 mm) Stainless: .023 - .030 (0.6 - 0.8 mm) Flux Cored: .030 - .035(0.8 - 0.9 mm) |
H: 17 1/2" W: 10 5/8" L: 15 3/4" |
72 lbs
(ship wt 81 lbs)
|
135 A at 22.5 VDC, 30% Duty Cycle CSA |
21.7 |
5.0 |
4.1 |
B & R WELDER REPAIR SERVICE INC. 4412 SOUTHERN BUSINESS PARK DRIVE WHITE PLAINS, MD 20695 800-783-3073 FAX 301-934-3057 Hours : Mon-Fri 8-5 Sat 9-12 EST Email questions to : brwelder@radix.net

OUR SELLING POLICIES
|
| Payment |
Paypal, money orders, cashier , certified and personal checks, all major credit cards. Payment requested within 3 days of purchase.If you mail a check or money order please call us at 800-783-3073 ad let us know it is being sent. Personal Check will take 14 days to clear
|
| Fees |
Maryland sales tax of 5 % charged on all orders shipped to or picked up in Maryland. |
| Shipping |
Most items include free shipping to 48 states, check listing for the FREE SHIPPING. . Large welders require truck shipment to your door. You must get them off the truck.We can arrange for a lift gate if you request it. A daytime phone number is required .Some one must be there for truck freight deliveries. We ship all items under 150# UPS or FexEx ground service. You can choose 2nd day or next day at additional charge, send email or call for cost. WE DO SHIP VIA USPS for some small items and to an APO box which there is a $ 15-$ 25 surcharge on all items. We will not ship to a freight fowarder unless a wire transfer , certified check, money order is given, no credit cards on orders to freight fowarders or third party shippers.
|
| Delivery |
We will usually ship your item the same day or next business day after receiving payment. Some weekend and holiday purchases may go out on Monday or Tuesday do to heavy volume. You will be notified immediatly if your item is on back-order. Some listing clearly list lead time for delivery, read carefully. Miller Helmets are sent from Miller Second Day Air, they may go out the same day as the order depending upon Miller backlog that day. We cannont guarantee you will get the helmet within 3 days of the order date as weekends do not count, there is a 1-2 day processing time and backorders which are not in our control.
|
| Refunds & Returns |
Our general policy is NO RETURNS. Many of our items are very heavy, shipping is expensive for us. We list and sell exactly what we list. We feel there is no reason to accept returns unless damaged in shipment. We insure all shipments internally. You can always call and we can discuss returns for reasons other than damage.EXCHANGES AND RETURNS SUBJECT TO UP TO A 25% RE-STOCK ,PLUS OUTBOUND SHIPPING CHARGES AND RETURN SHIPPING CHARGES.
|
| Contact Me |
Email brwelder@radix.net Phone 800-783-3073 5 DAYS A WEEK 8:00 AM - 5:00 PM EST And Sat 9-12. Some questions and special shipping requirements may take a day or so. We try to return all calls during business hours within one hour or less. Emails sometimes can take a little longer, but will be answered as fast as we can. |
Warranty - All warranties are thru the manufacturers. We will help you with calling the manufacturer or receipts. We are not responsible for down time or loss of use. On helmet warranties the customer must send the defective lens to us and the customer is responsible for the return shipping cost back. stwithpolicies | |


We expect payment within 3 days. If paying by money order or cashiers check we expect them to be mailed within 3 days and to be notified. We suggest Priority Mail. WE USUALLY SHIP THE NEXT BUSINESS DAY AFTER PAYMENT RECEIVED, SAME DAY IN SOME CASES. . All items are covered by Manufacturer warranties.. We will help you with any warranty issues. Small items shipped by UPS , FEDEX or USPS ground, unless you choose 1st or 2nd day air at additional charge. Larger welders are shipped via common carrier of our choice. We get it to your door.There are no additional charges for lift gates if we are notified this is needed at the time of the order . We strive to always have stock available for shipping, but from time to time stock-outs may occur.. Some welders are not stock items and will be ordered from manufacturer when paid for. It usually takes only a 1-4 days to ship to you. Some are shipped direct from manufacturer. WE INSURE ALL SHIPMENTS . NO RETURNS UNLESS DAMAGED IN SHIPMENT OR AGREED UPON RE-STOCKING AND SHIPPING CHARGES PRIOR TO RETURN.. EXCHANGES ONLY WHEN AGREED BEFORE RETURNING. EXCHANGES AND RETURNS SUBJECT TO 25% RE-STOCK PLUS OUTBOUND SHIPPING CHARGES AND RETURN SHIPPING CHARGES. ALL PRODUCTS COVERED BY MFG. WARRANTIES . NO RETURNS--SELLER NOT RESPONSIBLE FOR ITEMS DAMAGED IN SHIPPING, WHILE INSURED THIS IS FOR LOST ITEMS. ITEMS ARE PACKAGED WELL AND SHOULD ARRIVE UNDAMAGED. NO RETURNS FOR ANY REASON. READ LISTING CAREFULLY FOR POWER REQUIREMENTS. |
| |
 |
| Paypal: |
Paypal is preferred payment method. We accept all major credit cards, certified checks , money orderes and personal checks. Personal checks take 2 weeks to clear. On out of the country orderes we only accept wire transfers. Please call for our banking info.
|
| Credit Cards: |
Call 800-783-3073, 8:00 AM to 5:00 PM EST 5 days a week to use all major credit cards. I |
| Personal Check: |
Personal checks take 2 weeks to clear
|
| Money Order/Cashiers Checks: |
We accept these, please notify that you are using this method and mail within 3 days of auction end. |
| Other: |
We will ship to other countries but we only accept wire transfers, please call 301-870-3252 or email us at brwelder@radix.net
| |
 | |