MOREZMORE OOAK Magic Sculp Sculpt Epoxy FLESH 1 lb

Considering Multiple Purchases?
Here is the info on Combined Shipping, Shipping Time, etc.

Northern wing of the estate.
A stone-paved path leads to Morezmore OOAK Art Studio.
Inside you find:

1 lb of Magic Sculp (sometimes called Magic Sculpt) by Wesco - a two part epoxy putty (8 oz resin + 8 oz hardener).

This listing is for 1 lb size.

COLOR - FLESH

Also available in 1 lb, 5 lb, 10 lb and 15 lb sizes

How to: Magic sculpt is a 2 part epoxy putty, it comes in 2 containers. Once two ingredients are mixed (equal amounts), it hardens to rock-hard state. It takes about 1.5 hours for Magic Sculpt to start hardening (from the time of mixing) and it completely cures after 12 hours. It needs to be mixed well. To check whether it is properly mixed, here is a test that I use.

Mix 2 parts, roll into a ball, flaten it into a pancake on flat surface. The two parts are of different color, but the mix should be one uniform color. If there is any kind of "marble effect", keep kneading. Here is the picture - the one on the left still needs mixing, the one on the right is good to go:

Here are very detailed mixing instructions from the manufacturer:
http://www.magicsculp.com/mixing.htm

And here is Frequently Asked Questions about Magic Sculpt:
http://www.magicsculp.com/faq's.htm



ZOOM		ZOOM		ZOOM
	Z O O M		Z O O M
	Z O O M		Z O O M
	Z O O M		Z O O M
	Z O O M		Z O O M

Not only Magic Sculp is great for building armatures and bases because of its superiour strength but it has fine enough grain to actually sculpt from it - see the 2" tall Firefly sculpture on the picture above.

To use Magic Sculp, you simply mix equal parts of the resin and hardener, then knead together until a uniform color is obtained. It can then be shaped, sculpted and smoothed with a wet finger or modeling tools. It will harden in 1 1/2 to 3 hours.

Magic Sculp will adhere tenaciously to most any surface, and can be sanded and painted when hard.

My personal experience - I love this wonderful product and I still intend to use it, even though my skin is sensitive to it. I cover my hands with a layer of petroleum jelly, because gloves don't work for me, and I wash my hands super thoroughly after working with it.

- Easily mixed (Resin and Hardener slightly color coded: mix until one solid color).
- Good adhesion to almost all clean surfaces, including glass.
- Excellent malleability.
- Good sculpting media: as easy to work with as oil clay.
- Surface may be smoothed out with water.
- Water and soap clean up.
- Completely inert when cured.
- Accepts all types of paint.
- Surface may be sanded or ground when cured.
- No measurable shrinkage.
- Good for repairing anchoring bases and armature rods.
- Indefinite shelf life.
- Very forgiving on mixing ratio. Ratio may be varied to slow or speed up time.
- Repairs low pressure leaking pipes of plastic, cast iron, stainless steel, and copper.

Magic Smooth is a companion product with a vaseline- or petroleum jelly-like consistency (please see the last picture showing a toothpick with some goo on it - that is Magic Smooth. It is great for securing rods in tubes while assembling Modular Brickhouse Armature, filling small holes, anchoring rods in the base.