MULTI 1450 K 2-Color Press w/ KOMPAC + Swing-Away T-51


This listing has ended. Item:MULTI 1450 K 2-Color Press w/ KOMPAC + Swing-Away T-51

Manufacturer: MULTI
Model: 1450K

Swing-Away TOWNSEND T-51 T-Head
KOMPAC Dampener on the Main Head
Airtech Powdair 3 Powder Spray
Big Foot Suckers
Sheet Register Board w/ Micro-Adjustable Side Guide
'New' Rollers Installed
'New' Blanket Installed

Serial: 427728
Condition: It takes a special shop to buy this press new. They bought the press with a Swing-Away T-Head, and many other options. You don't see these presses in anything but excellent condition because the shops that can afford them (roughly $54,000 new with these options) take care of them! And this one's no exception. It just shines and prints, a really beautiful printing press that shows tons of signs of exceptional care and maintenance. This is the press to buy.

MULTI 1450K 2-Color Offset Delivers Amazing Control and Convenience.
The MULTI 1450K 2-color press is designed with easy operation in mind. With the ability to use polyester or metal plates and print 11x17", it handles a wide range of small-lot jobs with superb efficiency.
Swing-Away TOWNSEND T-51 2nd Color Head: This turns any single color press into a 2-Color press, doubling your production ability on multi-color jobs! Many more features / benefits outlined below. *New Cost: $7000*
KOMPAC Dampener on Main Head: Obviously an amazing dampening system. Many more features / benefits outlined below. *New Cost: $2500*
Airtech Powdair 3 Powder Spray: This is AirTech's top of the line powder drying unit. Many more Features / Benefits outlined below. *New Cost: $1900*
Double Sheet Detector and Eliminator: This is sweet. If the press feeds a double-sheet, a 'trap-door' opens and knocks the extra sheet out of the press, into a tray and the press keeps running! It's essentially impossible to get a double-feed into the press with this great option. *New Cost: Unknown*
BIGFOOT SUCKERS: They bought everything to make this one heck of a machine. Bigfoot Suckers are widely recognized as the solution to all stock feeding problems and are awesome to have!
Easy to operate, convenient controls and panels
Vertical image micro-adjustment device
Electronic impression ON/OFF device
Preset repeat counter (5-digit)
Total counter (5-digit)
Paper jam detectors (blanket cylinder & delivery)
Automatic ink ductor on/off control device
Crank handle vertical paper guide
Diagonal image adjustment device (on plate clamp)
Delivery table dolly lower limit switch
Delivery air blower
Safety covers
Work lamp
Swing-Away TOWNSEND T-51 2nd Color Head:
- With the T-51 you can produce two-color work, with precise register, with one pass through the press. There is no need to wait for the first color to dry before running the second one. There is no second-color register waste & two-color production is nearly doubled!
- Four-color processes can be produced in just two passes!
- You can print single-color on your offset press by simply disengaging the T-51. The T-51 one can then standby until your next run.
- If that isn't satisfying, you can print single-color with the T-51!
- Takes up no more floor space than your offset press.
- Applications include: business cards, letterheads, envelopes, two-color thermography, duo-tones and/or all your two-color & four color work.
- Uses all the same inks, fountain solutions, plates & other printing supplies as your current press.
- Operating controls are similar to your current press to reduce operator training time.
- Greater operating economy & efficiency plus increased versatility.
- Townsend innovation & dependability.
KOMPAC II:
- The KOMPAC is a completely automatic dampening system.
- The KOMPAC delivers a carefully metered, thinner film of dampening solution to the plate.
- This film is AUTOMATICALLY adjusted and only the ink keys need be adjusted to maintain denser solids and sharper halftones.
POWDAIR 3:
- Impression triggered compressor shut off.
- Anti-static spray bar design
- Adjustable powder concentration.
- Auto speed sensing automatically adjusts
- Test mode to set powder concentration.
- Spray to changes in press speed.
- Pulsed spray timed to sheet.
- Air blow down for improved sheet delivery.
  --

Maximum Paper Size: 12.75" x 17.25"
Minimum Paper Size: 3.54" x 5.12"
Maximum Printing Area: 12.5" x 17"
Paper Thickness: 0.0016" ~ 0.012"
Printing Speed: 3,000 ~ 10,000 iph
Metal Plate Type: Pin bar / straight edge; 25 holes, 0.5" pitch
Feeding System: Universal feeder
Feeder Pile Capacity: 17.72"
Delivery Pile Capacity: 20.47"
Number of Rollers
- Ink rollers: 10 (2 form rollers)
- Water rollers: 5 (1 form roller)
Gripper Margin: 0.315"
Vertical Image Adj.: ±0.787"
Electrical:
- 230V
- 50/60Hz
- 11/12 Amps
Dimensions:
- Length: 60"
- Width: 36"
- Height: 58"
- Weight: 1,275 lbs.


Shipping and handling Item location: Goshen, IN, United States Services available: Freight - Check the item description or contact the seller for details Ships to: N. and S. America, Europe, Australia

Return policy

The seller will not accept returns for this item.

Payment details

Payment method	Preferred/Accepted	Buyer protection on eBay
	PayPal Preferred	Pay with and your full purchase price is covered \| See terms
Visa/MasterCard, American Express	Accepted	See your credit card issuer's terms
Money order/Cashiers check	Accepted	Not available
Other - See seller's payment instructions	Accepted	Not available

Seller's payment instructions

Please see Payment Information section in listing.

New Rollers + New Blanket + Powdair + Big foot Suckers!

Shipping and handling