| Effective August, 8th, 2009, WindMax
Green Energy Corp.
in Plano, Texas, USA is the exclusive distributor of HYenergy wind
turbines in the United States of America (including its territories and
possessions). HYenergy wind turbines are manufactured by Guangzhou HYenergy Co.,Ltd. (Also known as "Guangzhou Hongying Energy Technology Co., Ltd. ").
WindMax Energy Corp Contact Info:
Phone: 972-801-9778
Email: magnet4less@magnet4less.com
Dealer Wanted
MODEL NUMBER: HY-3000
5 Blades, High Output, 3500W Max Hybrid Output/48V, Home Wind Turbine with Hybrid Wind/Solar Output
High Output, 3500W Max maximum wind/solar hybrid output, 3000W rated with wind only
Benefit of 5-blade vs. 3-blade wind turbines:
Designed to maximize energy output at low wind conditions under 25 mph.
Higher energy output at low wind speed
Lower cut-in speed
Lower start-up speed
Advantages of 5-blade wind turbines over 3-blade wind turbines
1) 5-blade wind
turbines will greatly improve annual energy production in low wind
conditions. For areas with average wind speeds of 11 MPH (5m/s). If
you compare annual energy output to conventional 3-blade wind turbine, there is an increase of annual energy output of more than 60%.
2) 5-blade wind turbines will dramatically improve the reliability and
safety of wind turbine. The blade rotation speed of a 5-blade turbine
is 60% of the rotational speed for a 3-blade wind turbine. 5-blade
wind turbines will greatly reduce chance of overspeed control malfunction. This will ensure operational reliability from a long term perspective.
3) The lower blade rotation speed of 5-blade wind turbine will lower
wind turbine noise and make 5-blade wind turbines more community
friendly than 3-blade wind turbines.
Dealer Wanted
Designed with both reliability and performance in mind, HYenergy Wind Turbines feature maintenance free design, high reliability and consistent performance.
A small home wind turbine is a long term investment. Before you purchase a wind turbine, the first factor to consider is if the energy produced by a wind turbine can pay for itself in 10 years or less. In order to achieve this, the wind turbine must be a high quality, reliable, maintenance free wind turbine with excellent performance.
The second factor to consider is installation and ownership cost. Poor reliability, low quality and high maintenance will greatly increase ownership cost and make the wind turbine impossible to pay for itself.
The third factor is environment and safety. A small home wind turbine should be safe for high winds, quiet and have no vibrations to make it residential/home friendly.
HYenergy wind turbines can meet the above requirements and do much more:
- Designed and built by an experienced wind turbine technology R&D team that are committed to innovation and quality.
- CE certified for "Small Wind Turbine with High Reliability".
- ISO certified for "Design, Development and Manufacture of Small Wind Turbines".
- Amazingly quiet operation with little or no vibration. Conforming to the IEC 61400-11 wind turbine standard for Noise Measurement
- Reliable two-moving-part maintenance free design. No problematic furling.
- Fully automatic with blade aerodynamic braking and controller electromagnetic braking.
- HYenergy wind turbines will ensure safe operation at high wind. Survival wind speed is up to 134 mph (3 blades models). Old style fiberglass blades make the old style furling based wind turbine a hazard at high wind.
- High efficiency is achieved by matching design of the generator and blades.
- Patented Blades with twisted aerodynamic design and high efficiency are made using the latest advanced thermoplastic engineering and precision injection molding technology for highest strength, consistency of quality, performance and durability.
- Easy installation, no welding needed. Pole connector provided for standard Schedule 40 2" pipe pole.
- Brushless Generator: NO motor brushes in our generator and a maintenance-free design with strong neodymium magnets. Old style generators have motor brushes that require regular maintenance. Brushes are high failure items and need replacements regularly.
- The blades are made of high-strength Nylon-fiberglass materials. They are not the hollow fiberglass blades which are dangerous in high wind and need to be replaced in a couple of years.
Patented, ISO certified HYenergy wind turbine with 5 blades is the next generation system built with advanced technology, it is light weight and easy to install. It performs much better and is much more reliable than older style wind turbines using furling which is outdated technology.
Designed for low wind conditions to give you higher output than conventional furling based wind turbines
Rated power (wind turbine only): 3000W
Maximum power: 3500w with wind and solar combined
Can be configured as either off-grid or grid-tie applications
The wind turbine with mechanical furling overspeed control outputs dramatically lower energy in constantly changing wind and high wind conditions, mechanical furling wind turbines have a narrow working wind speed, recommended maximum working wind speed for mechanical furling wind turbines is up to 30 mph. They are not recommended for constantly changing wind speeds or high wind speed more than 30 mph. YOU NEED THE H- series WIND TURBINE FOR HIGH WIND AREA OR AREAS WITH CONSTANTLY CHANGING WIND SPEEDS.
From our customer's feedback, mechanical furling wind turbines work well if the wind speed is mostly constant and from 6.7 mph to 20 mph because the mechanical furling almost always kicks in early and results in low performance for more than 20 mph wind speed.
We want to let customer know the difference between H series and V series and choose the best wind turbine. H series is built with the best matching, high efficiency blades and maintenance-free design. Commitment to innovation, long time, advanced R&D and patented technology ensure H series to have high efficiency and high energy production.
Old style mechanical furling wind turbines are built with old dated technology and lots of small companies copy the same design over and over without any R&D effort. Our prediction is that mechanical furling based wind turbine will be obsolete in the future because of low efficiency and low quality.
H series wind turbine is designed to provide higher actual energy output in variable wind conditions and high wind conditions, It has maintenance-free design, all major parts are built with stainless steel for long term reliability and patented blades with efficient twisted aerodynamic design are made with Nylon-fiber materials which last much longer than fiber glass blades.
Comparing wind turbine performance using power curve is the most mistake people make. Don't get fooled by the deceiving power curves with high peak power for wind turbines, Instantaneous wind turbine power output (Watt) means NOTHING for wind energy. Accumulated energy production (KWH) is what customers should invest on.
Wind turbine performance should be evaluated by energy production in watt-hours, not peak power, not a single point on the power curve.
The power curve is useful to evaluate performance of wind turbines in high winds, our wind turbine performs well in high wind conditions and produce more energy than most of other "3kw" wind turbines.
Nylon-Fiber Glass High Efficiency blades is aerodynamically designed to regulate themselves, slowing automatically in high winds.
With a maximum 3500 watt wind/solar hybrid output, the H30 performs more consistently and is much more efficient than the side furling wind turbines and has additional solar/wind hybrid output capability.
The highest output in low wind in its class, superior performance and maintenance free design make H30 wind turbine the most efficient and most reliable wind turbine in it class.
This results in more energy output in KWH yearly
Our wind turbine is made in modern ISO 9001 certified production facilities. Our Factory is ISO 9001 certified for implementation of quality management system for "DESIGN, DEVELOPMENT AND MANUFACTURING OF SMALL WIND TURBINES". ISO certificate ensures wind turbines to have superior quality and consistent performance.
Low noise level, neighborhood friendly: Pole adjacent noise level is < 55dBA, conforming to IEC 61400-11 wind turbine standard for Noise Measurement. Perfect choice for residential and rural, industrial, RV and marine applications.
ISO certified 
CE certified for "Small Wind Turbine with High Reliability"
Customers beware: there are illegal copies of H series on the market that don't have the high production quality and efficiency of our H series. H series are made by original patent, ISO certificate holder and CE certificate. Illegal copies don't have CE certificate, ISO certificates, Wind Turbine Patent, or high production quality.
Solar/wind hybrid controller with separate Dump loader included
5 Years Limited Warranty
HY-3000 system includes generator with slip ring, hub, 5 blades, nose cone, tail, wire connector, stainless steel weld-on Pole Collar, wind/solar hybrid controller, dump loader, and screws/bolts/washers/nuts needed to assemble the wind generator
Higher Efficiency = Higher Output and More Energy
Hidden cost of old style wind turbines with traditional mechanical furling
Low Efficiency Blades: Even with larger swept area, due to the low production quality and poor aerodynamic design, these old style blades can't capture the power in the wind efficiently. see below table for details.
Poor performance: The furling mechanism is not responsive to the constant changes of wind speed and wind direction. The furling system kicks in either too early or too late to go back to normal operation. This results in poor performance.
High Maintenance cost: The furling components are easy to wear out and break. They need lots of maintenance...therefore they are not a good long term investment.
Heavy Weight: wind turbines with traditional mechanical furling are heavy...therefore they have higher shipping cost, hard to install and maintain.
High Noise Level: Old style wind turbines with traditional mechanical furling is developed without noise control in mind, NOT neighborhood friendly.
Low survival wind speed: 78 mph (35 m/s) survival wind speed can't withstand high winds without damage and turbine needs to be taken down when wind speed exceeds 78 mph, output will diminish during high wind speed events.
|
High Efficiency 3500W Maximum hybrid output/48V HYenergy HY-3000 Wind Turbine system with Slip Ring, Electromagnetic speed limitation, blade over-speed braking and hybrid solar/wind power output capability with maintenance free design.
HYenergy Wind Turbine system HY-3000 is built for residential/industrial land, RV, and marine applications
Stainless Steel Ring mount included with built in shock absorber bolts directly to Skystream towers for easy connection, safety and durability.
Ring mount may also be welded to other styles of pole towers.
Patented, twisted high efficiency blades and extremely efficient aerodynamics design optimize angle of attack all along blades at different wind speeds and create the highest lift to drag ratio, blades are made using the latest advanced thermoplastic engineering and precision injection molding technology.
Multifunctional Hybrid controller combines the functions of solar/wind charge control, dump load, over-charge protection, short-circuit protection and pole-confusion protection
Strong Neodymium magnet PMA, the unique winding and multi-pole design reduces the start-up torque of the alternator that assures the it can generate more electricity.
Compare to Old style side furling turbines pictured below - with poor quality parts, unprotected connection wires, basic function controller, problematic furling components, and hand made low efficiency fiber glass blades
    
Dealers Wanted, please contact us for dealer pricing.
Comparison of Hybrid Wind Generators with Aerodynamic Braking, Electromagnetic Braking, Slip Ring
vs.
Old Style Wind Generators with Mechanical Furling |
|
Hybrid Wind Generators with Aerodynamic Braking, Electromagnetic Braking, Slip Ring
|
Old Style Wind Generators with Mechanical Furling |
| Overall |
High performance, high efficiency, high reliability and superior workmanship, designed to work from low to high wind speeds.
Patented, twisted high efficiency blade and extremely efficient aerodynamics design optimize angle of attack all along blades at different wind speeds and create the highest lift to drag ratio
ISO certified for wind turbine production quality, CE certified for meting EU standards.
Low noise level, Neighborhood friendly: Pole adjacent noise level is < 55dBA, conforming to IEC 61400-11 wind turbine standard for Noise Measurement. Perfect choice for residential and rural, industrial, RV and marine applications.
|
Average efficiency, average reliability and average workmanship with deceiving rated output, designed for perfect wind conditions at rated wind speed, much lower output at realistic wind conditions, lower output at low wind speed, stop working at high wind speed.
Even with larger swept area, blades with low efficiency and poor aerodynamic design can't capture the power in the wind efficiently.
No quality control, NOT ISO certified, noisy.
|
| Wind/Solar Input |
Can be used as either wind turbine only or wind/solar hybrid system. Integrated wind and solar power sources to capture the most energy in all conditions. Since solar and wind energy availability differs by locations, seasons and climates, solar and wind energy can be mutually complementary in that solar and wind hybrid systems make full use of wind and solar energy together to generate as much power as possible. |
Work with wind only, NO electricity generation when wind speed is too low |
Design, Quality, Reliability & durability
|
Highly reliable, Innovative two moving part design with maintenance-free generator design.
Excellent workmanship, stainless steel parts, high strength aluminum die cast generator housing. It is designed for various working conditions such as severe climate, sand and salt corrosive environments and marine usage. The generator features class B insulation, IP55 class protection, and is designed with a sufficient cushion of overload to ensure overall wind turbine reliability.
Slip ring design and electric braking ensure higher reliability than old style wind turbine with mechanical furling
Durable rotor blades are made of mixed nylon and reinforced fiber glass materials using the latest advanced thermoplastic engineering and precision injection molding technology for high strength, flexibility and aerodynamic braking. |
Much less reliable three moving part design, furling components wear out quickly and require a lot of maintenance. This would lead to possible mechanical abrasion, cause vibration, malfunction, and failure of the wind turbine and other possible negative results in the long run.
Poor reliability as result of no slip ring design,
the connection cable from wind generator to controller can be easily twisted and tangled , Tangled wires can be damaged and connections can be lost with potentially disastrous consequences.
Old style system with average workmanship, average quality parts may rust in a few years, not designed for rough working conditions such as severe climate, salt corrosive environments and marine usage. Due to the fact that most installations are in very remote and inaccessible locations, the old style systems make regular maintenance costly and sometimes impractical.
Hand made blades using fiber glass material with unavoidably inconsistent performance and quality. Built for amateurs/hobbyists, not for realistic electricity generation
|
| Braking & Efficiency |
High efficiency: Abandoned the traditional failure-prone mechanical furling system and solved efficiency, safety and reliability problems facing most small wind turbines. Advanced speed limitation is achieved through electromagnetic speed limitation supplemented by aerodynamic speed limitation by blade deformation. Combination of Electromagnetic braking and aerodynamic braking maximizes energy capture by extending turbine’s operating speed range into higher speed winds and lower speed winds which are missed by the old style wind turbines. |
Average efficiency: Braking depends on unreliable, problematic mechanical furling which only works well in an ideal, wind tunnel test environment. Realistically, wind speed and wind direction changes frequently and mechanical furling doesn’t have instantaneous response to actual changes of wind status. The furling system kicks in either too early or too late to go back to normal operation. This results in average efficiency. |
| Blade Design & efficiency |
Extremely efficient rotor aerodynamics: With patented and optimal twisted blade design, angle of attack is optimized all along blade at different wind speeds and therefore creates the highest lift to drag ratio. Twisted, high efficiency blades are insensitive to wind direction so they work much efficiently in real wind conditions. The twisted blades has very good self-start ability and has the capability of smooth running, high torque and high RPM, which makes it suitable for electricity generation.
In summary, H series highly efficient blades means smaller size blades for same or more power.
Advanced aerodynamics design to capture maximum wind energy. The blades have exceptional consistency and aerodynamic outline with a mass distribution that ensures the rotors operate with minimal vibration. In high wind speed conditions, patented blades will generate a reverse reluctance torque, so that the blade efficiency falls and the blade rotation speed starts to decline. With the continuing reluctance torque, blade rotation speed is limited to a certain range to prevent damage to the wind turbine blades.
|
Low efficiency with poor aerodynamics design.
Even with larger swept area, due to the low production quality and poor aerodynamic design, these old style low efficiency blades can’t capture the power in the wind efficiently.
Blades have higher noise level, blades have no aerodynamic braking feature, blades won't operate at high wind speed.
|
| Blade Material & Quality |
Made of mixed nylon and reinforced fiber glass materials using the latest advanced thermoplastic engineering and precision injection molding technology for high strength, flexibility and aerodynamic braking. |
Hand made blades using fiber glass material with unavoidably inconsistent performance and quality. Built for amateurs/hobbyists, not for realistic electricity generation |
| Maintenance |
Maintenance-free generator design, maintenance free design has a minimum of moving parts with inherent reliability. |
The furling components such as bearings are easy to wear out. lots of maintenance required |
| Installation |
Light weight, compact and modular generator design makes installation simple. Straightforward step by step instructions. |
Heavy weight and old style design of generator and furling components result in complex and lengthy installation. |
Wire connection
and Pole connection |
wire Connector from wind generator to controller included for safe and easy installation
No-welding-needed pole connector for easy installation
|
No connector included
Welding needed
Pole collar ring not included |
Pictures of Installed HYenergy Wind Turbines from Customers
 
Higher Power Output Small Wind turbine system
Great for cabins, backup power, battery charging, RV and remote power
Perfect Wind turbine system to compliment existing solar systems
Wind/solar hybrid controller can support combined wind generator load & solar load
Can be used as either wind turbine only or wind/solar hybrid system.
This product is listed using maximum hybrid wind/solar output capacity in the product title, you need both wind turbine and solar panel to achieve maximum wind/solar output capacity. Please read all the product details before your purchase. Solar panels are sold separately.
Optional Inverter: Outback inverters FX or VFX series for off-grid or Xantrex XW4548 Inverters for grid-tie w/battery backup
The HYenergy Wind turbine system is
the perfect choice in a smart investment for a renewable energy
solution built on advanced technologies. The HYenergy wind turbine
defines a new level of superior performance and reliability by using:
1. Brushless, Strong Neodymium magnet PMA, the unique winding and multi
pole design reduces the start-up torque of the alternator that assures
the HYenergy wind turbine can generate more electricity.
2. Advanced aerodynamic braking by patented nylon/reinforced fiber glass blades.
3. Electromagnetic over-speed control, no more problematic mechanical furling.
4. Integrated solar-wind hybrid power generation.
5. Innovative low maintenance two-moving-part system design.
6. Easy to Install, Light Weight and highly reliable.
7. Generator: The generator is built using high-performance rare
earth neodymium permanent magnets, so the alternator is compact and
light weight with a high power generating efficiency. Generator housing
is made using precision cast technology from high strength aluminum to
assure a high quality finish. It is designed for various working
conditions such as severe climate, sand and salt corrosive environments
and marine usage.
8. Rotor Blades: Advanced airfoil design to capture maximum wind
energy. Made of mixed nylon and reinforced fiber glass materials using
the latest advanced thermoplastic engineering and precision injection
molding technology for high strength, flexibility and aerodynamic
braking. The blades have exceptional consistency and aerodynamic
outline with a mass distribution that ensures the rotors operate with
minimal vibration.
In summary, HYenergy wind turbines are the most well built, reliable,
most efficient and cost-effective small wind turbines available on the
market today.
The result: greater energy production yield and lowest ownership cost.
Design Features
Advanced over-speed control mechanism vs. old style furling
Problems with old style furling:
Old style furling works well in an ideal, wind tunnel test environment.
Realistically, wind speed and wind direction changes frequently and
mechanical furling doesn’t have instantaneous response to actual
changes of wind status. Especially in bad weather conditions, small
wind turbine furling components wear out quickly, therefore, increases
maintenance costs and shorten wind turbine service life or causes
system failure.
Most of old style furling based wind turbines have three moving parts.
It is the moving parts for mechanical over-speed protection that wear
out and require a lot of maintenance. Operation of furling based wind
turbines would lead to mechanical abrasion, cause vibration,
malfunction, and failure of the wind turbine and other devastating
results in the long run.
The rule of thumb for a reliable wind turbine is that the fewer the moving parts, the more reliable the wind turbine is.
HYenergy Solution:
HYenergy wind turbine adopted Innovative
over-speed control so it improves the reliability by abandoning the
moving parts for mechanical over-speed protection and minimizing the
moving parts to only two.
Innovative over-speed control design of the HYenergy wind turbines:
HYenergy wind turbine
speed limitation abandoned the traditional failure-prone mechanical
furling system and solved safety and reliability problems facing most
small wind turbines. Advanced speed limitation of HYenergy wind turbine
is achieved through advanced electromagnetic speed limitation
supplemented by aerodynamic speed limitation by blade deformation.
Electromagnetic braking is used in combination with Aerodynamic braking
to reduce the rotational speed of the generator.
Combination of Electromagnetic braking and aerodynamic braking maximizes energy capture by extending HYenergy wind turbine’s operating speed range into higher speed winds which are missed by the old style wind turbines.
1. Electromagnetic speed limitation:
Controller will monitor the wind generator rotation through the wind
generator output voltage and frequency, and will timely control wind
generator rotation by generating reverse reluctance torque if
necessary, according to different wind conditions and battery status.
Electromagnetic control features quick response, high reliability and
therefore ensures the entire control system to be highly reliable.
2. Blade aerodynamic braking:
In high wind speed conditions, patented blades will generate a reverse
reluctance torque, so that the blade efficiency falls and the blade
rotation speed starts to decline. With the continuing reluctance
torque, blade rotation speed is limited to a certain range to prevent
damage to the wind turbine blades.
Higher performance at low wind speed
Problem with small wind turbine system on the market today
The most challenging problem facing small wind turbine systems is that
power output is very low or close to nothing under low wind condition.
The wind speed in most locations don’t stay at rated wind speed all the
time, wind turbine actually operates at wind speed lower than rated
wind speed at most of the time. In order to have good overall energy
output, it is critical for small wind turbine to output as much as
power at low wind speed.
HYenergy Solution:
Strong Neodymium magnet PMA, unique winding and multi pole design
reduces the start-up torque of the alternator that assures the HYenergy wind turbine can generate electricity at low wind speed. HYenergy wind turbine
system components such as wind generator and blades are designed to
output more electricity at low wind speed than other small wind
turbines on the market today. HYenergy wind turbine system’s excellent power output under low wind speed results in greater energy production yield and lowest ownership cost.
Wind-solar hybrid power generation wind turbine system
Problem with single source renewable energy system:
1st Generation single source renewable energy systems such as solar
systems or wind turbines don’t use renewable energy efficiently. Wind
turbines creates less output during the summer, whereas during the
winter the solar panels will produce less output.
HYenergy Solution:
Our hybrid solar-wind turbine integrated wind and solar power sources
capture the most energy in all conditions. Since solar and wind energy
availability differs by locations, seasons and climates, solar and wind
energy can be mutually complementary in that solar and wind hybrid
systems make full use of wind and solar energy together to generate as
much power as possible compared to a single energy source for power
generation. A solar & wind hybrid system is more cost-efficient
than wind or solar alone.
Easy-to-install, light weight, compact, reliable and
maintenance-free wind turbines, designed for both land-based and marine
applications.
Problem with old style wind turbine systems:
Most old style wind turbines are heavy weight with unpredictable
reliability, hard to install and require lots of maintenance. Due to
the fact that most installations are in very remote and inaccessible
locations, the old style systems make regular maintenance costly and
sometimes impractical.
HYenergy Solution:
HYenergy wind turbine's maintenance
free design has a minimum of moving parts with inherent reliability.
Our light weight, compact die-casting aluminum alloy generator design
makes installation very easy. Rotor blades built with latest advanced
thermoplastic engineering and precision injection molding technology is
durable and efficient.
HYenergy wind turbine components built with advanced technologies
Generator:
Generator: The generator is built using high-performance rare earth
neodymium permanent magnets, so the alternator is compact and light
weight with a high power generating efficiency. The unique winding and
multi pole design reduces the start-up torque of the alternator that
assures the HYenergy wind turbines
can generate electricity at low wind speed. The generator features
class B insulation, IP55 class protection, and is designed with a
sufficient cushion of overload to ensure overall wind turbine
reliability.
Generator housing is made with precision cast technology from high
strength aluminum to assure a high quality finish. It is designed for
various working conditions such as severe climate, sand and salt
corrosive environments and marine usage. Aluminum die cast alloys can
withstand the highest operating temperatures of all die cast alloys.
Ideal for demanding environments, it offers high strength and rigidity
along with good corrosion resistance and heat dissipation.
Rotor blades:
Patented Blade design vs. traditional hand made fiber glass blades:
Our Blades are made with the latest thermoplastic engineering and
injection mold technologies. The blades are made of mixed reinforced
fiber glass and nylon materials. These manufacturing technologies
ensure the highest strength, flexibility of blades and consistency of
the blade shapes. The blades will automatically slow the turbine in
strong winds and reduce noise.
A set of 5 Blades designed to capture as much wind energy as possible.
Patented airfoil blade design makes the system run much more
efficiently and the rotor blades are made with the latest advanced
thermoplastic engineering and precision injection molding technology.
The blades have exceptional consistency and aerodynamic outline with a
mass distribution that ensures the rotors operate with nearly no noise
and minimal vibration.
The blades feature lower start-up and cut-in speed and begin producing power at 2 m/s or 4.5 mph.
Solar/Wind Hybrid Charge Controller:
This multifunctional Hybrid controller combines the functions of AC to
DC rectifier, load control and dump load control for wind and/or solar
systems. It eliminates the need for separate rectifier, solar charge
controller and wind turbine controller. It is the most cost effective
solution for renewable energy systems.
Separate dump loader included
Main Features:
High Reliability: Separate dump loader and efficient ventilation design ensure reliable and efficient operation.
Great for hybrid wind/solar system, hybrid controller can support
battery charging from simultaneous wind generator load and solar load.
Charge Control: Constant voltage series PWM regulation to provide
highly efficient battery charging increase battery capacity and life.
Built in "ON/OFF Switch" to connect the wind turbine or solar panels to the controller.
Load control and diversion control: The controller has over-charge
protection, short-circuit protection, pole-confusion protection and
automatic dump-load function. It is reliable with a highly efficient,
long service life.
Uses advanced technology and automated production to provide exciting new features at a competitive cost.
Technical Specifications:
|
Model
|
HY-3000
|
|
Blade diameter
|
10.2 Feet (3.1M)
|
|
Blade material & design
|
Strengthened nylon, glass-fiber. Patented Blades with twisted aerodynamic design and high efficiency are made using the latest advanced thermoplastic engineering and precision injection molding technology for highest strength, consistency of quality, performance and durability.
|
|
Number of Blades
|
5
|
|
Speed-limitation mechanism
|
Electromagnetic speed limitation and blade over-speed braking
|
|
Survival speed
|
30 m/s or 67 mph
|
|
Rated speed
|
12.5 m/s or 28 mph
|
| Start-up Speed |
<= 4.47 mph (2 m/s)
|
| Cut-in Speed |
<= 6.7 mph (3 m/s) |
|
Rated power（W）
|
Rated 3000W with wind only
3500w maximum with wind and solar hybrid
|
|
Rated voltage（v）
|
DC48V
|
|
Generator
|
Brushless 3 phase PMA with high performance Neodymium Magnets
|
| Pole Connecting Flange Ring |
Stainless Steel Ring with 6 holes |
|
Recommended Tower
|
Skystream Monopole Towers or Similar - 33 ft, 45 ft or 60 ft
| | Tower-top Weight |
~ 150 LBs |
Note: Lightning protection device shown in the picture is not included.
Note: Solar panels sold separately
Below is the generator test result with load. Controller will start the overload control at around 61 volts.
 Click HERE to View/Download HY-3000 USER MANUAL
Dealer Wanted
 |
Back to Search Results
) 
Neodymium Magnet For Less
Print
Report item
and your