THIS IS A NAKAMURA-TOME SLANT 1 CNC TURNING CENTER
THIS MACHINE IS IN NEAT CONDITION, AND IN GREAT WORKING CONDITION
MADE IN JAPAN BY NAKAMURA-TOME PRECISION INDUSTRY CO.
TYPE: S-1
MODEL: SLANT 1
SERIAL # C22606
THIS NAKAMURA CNC TURNING CENTER JUST CAME FROM A VERY CLEAN SHOP THAT RECENTLY HAD TO CLOSE DOWN. THIS COMPANY HAD A FEW SHOPS, BUT HAD TO CLOSE DOWN. THIS COMPANY MADE SUPER PRECISION AEROSPACE TOOLING AND IT LOOKED LIKE THEY KEPT ALL THE MACHINES VERY CLEAN AND IN EXCELLENT CONDITION. THESE MACHINES WERE MAINTAINED TO HOLD VERY TIGHT TOLERANCES BECAUSE OF THE PARTS THEY WERE MAKING. THIS MACHINE WOULD BE A GREAT ADDITION TO ANY EXISTING SHOP AND PROTOTYPE FACILITY.
THIS MACHINE WAS MADE IN 1986, BUT IT IS IN EXCELLENT CONDITION, IT LOOKS LIKE IT HAS ONLY BEEN USED LESS THAN 10 YEARS.
WE ENCOURAGE ALL BIDDERS TO COME TO OUR SHOP AND CHECK THE MACHINE UNDER POWER. PLEASE CALL US AT 818-255-0848 TO MAKE AND APPOINTMENT TO SEE THE MACHINE.
IF YOU WOULD LIKE TO VISIT THE NAKAMURA WEBSITE PLEASE CLICK HERE
FEATURES:
FANUC SYSTEM CONTROL MODEL 10TE-F
12 STATION TOOL CHANGER TURRET
WORK LAMP
FOOT PEDAL
SHOWA LUBRICATION SYSTEM
PARTS CATCHER
CONVEYOR
EQUIPPED WITH NAKAMURA SLANT 1 INSTRUCTION MANUAL, FANUC SYSTEMS OPERATION AND MAINTENANCE MANUAL AND ELECTRICAL DIAGRAM
SPECIFICATIONS:
Capacity:
Round Collet Capacity............... 1-5/8" (42mm)
Chuck Diameter......................6"
Swing over front door.................. 16.54" (420mm)
Swing over slide cover................. 21.65" (550mm)
Swing Over Bed.............. 23.62" (630mm)
Swing Over Saddle................... 14.57" (370mm)
Max. Turning Diameter................ 12.99" (330mm)
Max. Turning Length....................... 14.17" (360mm)
Distance Between main Spindle Nose and Turret Face......................... 21.26" (540mm) max., 5.51" (140mm) min.
Main Spindle:
Drive Motor Continuous / 30 min. Rating: 7.5 hp/ 11 kw
Speed Range
Low range.............. 13-1230 rpm
High range.................. 45-4500 rpm
Number of Steps................. 2 step
Designation................... rpm direct designation
Spindle Nose...................... A2-5
Hole Through Spindle.................. 2.17" (55mm)
Hole Through Draw Tube..................... 1.69" (43mm)
Front Bearing Inner Diameter...................... 3.54" (90mm)
Max. torque at spindle motor at low range continous / 30 minutes rating................... 17.8/26.1 kg-m
Center Height from Floor..................... 40.94" (1040mm)
Access to Spindle Center from Machine Guards...................... 14.2" (360mm)
Saddle:
Configuration...................... 60 degree slant
Feed Motors
X-Axis: DC 0.8 kW
Z-Axis: DC 1.1 kW
Thrust
X-Axis: 400 kg.f (on time 300 sec 100% ED)
Z-Axis: 680 kg.f (on time 300 sec 32% ED)
Effective Slide Travel
X-Axis: 8.07" (205mm)
Z-Axis: 17.52" (445mm)
Rapid Traverse
X-Axis: 236ipm (6m/min)
Z-Axis: 590ipm (15m/min)
Ball Screw Diameter / Pitch
X-Axis: 1.42" (36mm), 0.31" (8mm)
Z-Axis: 1.42" (36mm), 0.39" (10mm)
Distance Between Slides
X-Axis: 10.24" (260mm)
Z-Axis: 14.57" (370mm)
Width of slideways
X-Axis: 1.97" (50mm)
Z-Axis: 3.54" (90mm)
Turret:
Turret Head Type: Drum
No. of Tool Stations: 12
Tool Size
Square: 3/4" x 3/4"
Round: 1.25"
Indexing Drive with Direction Logic................... AC 0.75kw (4 poles)
Indexing time
One station (approx)................ 0.7 sec
180 degree (approx)...................... 2.5 sec
Curvic coupling diameter..................... 8.27" (210mm)
Turret Clamping Force................. 10,340 lbs. (4700 kg)
Hydraulic Unit:
Pump Motor............... AC 1.5kw (4 poles)
Tank Capacity................. 14.2 US gallons (54 liters)
Line Pressure in Normal Cutting............... 498 psi
Pump Delivery 50 / 60 Hz............... 21/25 liters/min
Coolant Unit:
Pump Motor.................. AC 180 watts (2 poles)
Tank Capacity................... 31.7 US gallons (120 liters)
Pump delivery at outlet of pump plain water 50 / 60 Hz............
Lubrications Unit:
Pump Motor.................... AC 200 volts (10 watts)
Tank Capacity.................... 0.58 US gallons ( 2.2 liters)
Pump Delivery.................... 3-6cc/ 10 min
Max. Delivery Pressure...................... 70 psi
Tailstock:
Type....................... Knock-pin shot positioning type with built-in rotating spindle
Distance between main spindle nose and quill center.......................... 20.87" (530mm) max., 3.35" (85mm) min.
Quill center...................... MT-3
Quill stroke.......................... 3.94" (100mm)
Quill diameter........................... 3.15" (80mm)
Electrical................. 220 Volts Three Phase
Overall Dimensions: 104" X 76" X 80" tall. (THE LENGTH OF THE MACHINE WITH THE CONVEYER IS 126"
NET WEIGHT.................... 10,000 LBS.
COMES AS SHOWN IN PICTURES
PLEASE CHECK THE PICTURES
BUYER CAN PICK UP ITEM FROM OUR STORE, WE DO NOT HAVE A FORKLIFT WITH ENOUGH CAPACITY TO LOAD THIS MACHINE, SO BUYER WILL HAVE TO ARRANGE LOADING, OR IF WE ARRANGE LOADING IT WILL COST $300.00
BUYER PAYS SHIPPING AND LOADING ACCORING TO SHIPPING ADDRESS
IF YOU WOULD LIKE A SHIPPING QUOTE PLEASE CONTACT TONY SIDOTI AT 1-800-323-5441 EXT. 1383
IF THIS ITEM IS SHIPPED BUYER PAYS $300.00 FOR LOADING
OUR ADDRESS IS :
BB VERTICAL & MINI BLINDS
7361 ETHEL AVE. UNIT #3
NORTH HOLLYWOOD, CA 91605
If you have any questions, please call 818-255-0848
Or you can email us at bbvertical@aol.com
Track up to 10 items on this computer in 
)
