| |
|
1 - 5HP Static Phase Converter
Rated: Dual Range / Industrial Heavy Duty
Dual Range allows operation of multiple machine horsepowers with one
converter. |
GENTEC
American Rotary is the manufacturer and distributor of the largest
selection of phase converters!
Static phase converters, rotary phase converters, CNC phase converters, and
digital phase converters. |
|
DO NOT USE STATIC PHASE CONVERTERS
with Ovens, Heaters,
Lasers, CNC, Battery Chargers, Resistive or Rectifier loads, 2 or 3 speed
motors, Lathes (Non-clutched), Pumps, Fans, Refrigeration Equipment, Unattended Equipment,
Welders, Air
Compressors, Frequent-start
loads (more than 6x's/hr), Hard-Starting or multiple motor applications, or any equipment
that will be run at more than 2/3 rated
horsepower.
|
|
PLEASE READ SIZING INSTRUCTIONS CAREFULLY OR CALL
1-888-743-6832 FOR ASSISTANCE.
|
ALL of the following
conditions must be met:
-
Converter
must electrically see a 3-phase motor — connections through
contactors are okay, but through transformers are not
-
Controls
are okay if they all run from lines 1and 2 — Control transformers
are okay if tapped from lines 1 and 2 (reverse must also use lines 1
and 2)
-
Single
speed motors only
-
Typical
starting times under 3 seconds
-
Light to
moderate loads
-
Recommended
5 minute cool down between starts
-
Rotary
Phase Converters recommended for heavy or complex loads.
-
When using
a 1700-1800 rpm modern T-frame motor, the horsepower of the load
should fall within the horsepower rating of the phase converter.
-
For use
with motors other than 1700-1800 T-frame motors, use the weight of the
motor, and consult the chart on the right --->
|
Typical Frame
Size |
Weight of
Motor*
|
Converter
Rating** |
|
48 - 145T |
14
- 38 lbs |
1/3
- 3HP |
| 143T
- 184T |
30
- 95 lbs |
1
- 5HP |
| 182T
- 213T |
68
- 120 lbs |
3
- 8HP |
| 184T
- 215T |
80
- 160 lbs |
4
- 12HP |
| 213T
- 254T |
120
- 255 lbs |
8
- 15HP |
| 215T
- 256T |
160
- 286 lbs |
12
- 20HP |
|
*Use
for motors other than 1700-1800 RPM T-frame.
**Use for 1700-1800 RPM modern T-frame
motors. |
|
|
Dual
range selectable for starting different sized motors adds
convenience and flexibility to your shop. |
|
|
The
internal circuit in the static phase converter allows external
capacitance to be added or subtracted, which is easily done
from the terminal strip in the wiring compartment. This allows
the converter to be upgraded to run a larger machine, or downgraded to
run a smaller machine. The variable capacitance system is so
flexible, that all of the internal capacitors can even be bypassed to
add in run capacitors for extremely long start cycles. No
other static phase converter is this flexible. |
|
|
GENTEC
American Rotary's AutoLinkTM
Sensor automatically determines when your
machine is turned on. The static phase converter
is wired in before the machine switch, so it is not necessary to
tamper with the machines internal wiring. Simply
install the static phase converter between the circuit breaker and
the machine. |
|
|
Our
exclusive DataLinkTM Technology advances performance by offering
real-time component status and diagnostics. |
|
|
Our
custom-built motor starting capacitors offer a gentle, yet
aggressive starting cycle that can start the most stubborn and hard-starting equipment while gently handling easy-start precision
machines without overexciting the motors. |
|
|
Each
GENTEC static phase converter has five different mounting
configurations built in so that you don’t have to compromise when
mounting. Mounting hardware is included, as well as diagrams
that show the different positions. |
|
|
Forget
the wires! We have included oversized, easy to use terminal
blocks labeled for easy hook up. The terminal blocks are housed
in an oversized conduit box with pre-punched knockouts for quick and
easy installation. |
|
Established in 1991, GENTEC American Rotary is listed
with Dun
& Bradstreet, is a member of the Better
Business Bureau, and strictly adheres to Truth in Advertising, ethics,
and privacy standards. We are also recognized by Ebay as a Platinum
Level PowerSeller, sustain 100%
positive feedback, and a Square
Trade Seal membership, which acts as a third party customer protection
advocate. We are proud to serve our industry with convenient 24/7
toll free technical support and complete
dedication to providing outstanding products and service. With our tremendous product line and 24/7 toll free
technical support, you can be sure that the phase converter you select
from American Rotary will be the best phase converter for your three phase
application. Ask about our UL Listed Rotary and Digital phase
converters! Please call
Toll free 1-888-7GENTEC |
All
photography herein is protected and may not be altered or duplicated.
Copyright 2007 GENTEC American Rotary |
Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.
|
Track up to 10 items on this computer in 
)
