NEW! HPI Racing Cyber 10B Kit w/CB-1 Clear Body

STOCK# - HPIC1702 New and unused. In the original manufacturer packaging.
          This is the 1/10 scale electric powered  radio controlled 
                        HPI Cyber 10B Off-Road Buggy kit.

FEATURES: Chassis: Composite bathtub type chassis and upper deck
          Drive: Four wheel shaft with steel axles  dogbones and outdrives
            that are fully sealed for long life and smooth operation
          Shocks: Composite bodied oil filled
          Gearboxes: Closed
          Ball Bearings: Full set  18 total
          Differentials: Front and rear ball type
          Transmission: Single-speed with steel dogbones
          Tires: HPI G-Rip  Front  1.3  (34mm) wide  3.4  (86mm) outer diameter
            Rear 1.7  (43mm) wide  3.4  (86mm) outer diameter both  2.2  (56mm)
            inner diameter
          Wheels: White plastic five spoke  Front 1.2  (30mm) wide  2.2 
            (56mm) diameter  Rear 1.4  (35mm) wide  2.2  (56mm) diameter
          Motor Mount: Three pieces of cast aluminum allow easy motor rotation
            for precise gear mesh alignment
          Spur Gear: 84 tooth  48 pitch
          Bumpers: Nylon front
          Battery Tray: Located under drivetrain  accomodates stick  side by
            side and hard case LiPo batteries  batteries held in place with
            plastic strap and two height adjustable clips
          Body: Clear untrimmed buggy with wing and decals
          Suspension: Hot Bodies D4 type with stainless steel hinge pins
          Caster: Adjustable  caster/toe-in refers to the angle of the
            front suspension when viewed from the side of the car in relation
            to the chassis
          Camber: Adjustable  camber refers to the angle of the tops
            of the tires from vertical when viewed from front or behind vehicle
          Ackerman: Adjustable  Ackerman refers to the action of the inside
            front wheel turning faster than the outer front wheel during turns
          Steering: Bell-crank type with servo saver
          Warranty: Two year limited  valid only in the USA  Canada and South
            America

INCLUDES: HPI Cyber 10B Off-Road Buggy kit with tires  wheels  foam inserts 
            body  wing  84 tooth 48 pitch spur gear  decal sheet and
            instruction sheet

REQUIRES: Radio: 2-channel with one servo (high-torque servo recommended for
            steering)
          Electric Motor: 540 type
          Electronic Speed Control: Compatible with motor
          AA Batteries: 8 for transmitter
          Battery: 7.2V 6-cell stick pack
          Battery Charger: Timed or peak for 6-cell battery
          Pinion Gear: 48 pitch
          Misc. Items: Track equipment

SPECS:      VEHICLE-
          Length:    11    (280mm)
          Width:      9.8  (250mm)
          Height:     6.3  (160mm)
          Wheelbase: 11    (280mm)

            BODY-
          Length:    12.6  (320mm)
          Width:      5.9  (150mm)
          Height:     2.8  (72mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location              Qty.  Bearing Set
             2   12x18x4mm  Center drive shaft     1     DTXC1597
             4   5x11x4mm   Front Wheel Hubs       2     DTXC1547
             4   5x11x4mm   Rear Wheel Hubs        2     DTXC1547
             2   12x18x4mm  Front Diff Gear        1     DTXC1597
             2   12x18x4mm  Rear Diff Gear         1     DTXC1597
             2   10x15x4mm  Front Diff             1     DTXC1595
             2   10x15x4mm  Front Diff             1     DTXC1595

                                                                    jxs 3/25/09
                                                                         ir/jxs
Feedback: Please contact us first if you feel that you cannot give us
ratings of 5 in all categories. eBay now punishes sellers that get
scores less than 5. We are sure we can work out any issues that might
come up.  Thank you in advance for your feedback!