NEW INDUSTRIAL SEWING MACHINE 16 PRESSER FOOT SET #IF3

This is a BRAND NEW 16 PRESSER FOOT SET of different Very Popular Presser Feet for Brother / Consew / Juki / Mitsubishi / Singer Style INDUSTRIAL Single Needle Sewing Machines including:

ARTISAN    BROTHER    CONSEW    COLUMBIA    JUKI    MITSUBISHI    NAKAJIMA    REX    SEIKO    SINGER    SIRUBA    TAIKO    TOYOTA

These feet purchased separately would cost well over $200.00. And you would have to go to several sources just to find them all.

Get them here in a complete set and you are READY TO SEW!

FROM LEFT TO RIGHT

• 24983   This is the Standard Seaming, Stitching, and Joining Foot that is installed on Most new machines at the factory. This is the most commonly used Foot for Industrial SINGLE NEEDLE Sewing Machines.
  
  
• 24983T   This is the same foot as the #24983 Standard Foot but it has a Solid Teflon Bottom, making it very slippery. It is very useful with sticky fabrics like Vinyl or Rubber or other "Problem" materials.
  
  
• 142058N   This Foot is similar to a regular presser foot #24983 but it is much narrower for finer work on more delicate fabrics. It can also be used to set zippers. (P58N)
  
  
• 12435HN   This is a RIGHT Hinged Narrow Cording Foot ideal for sewing very close to zippers, welting, cording ,Buckles,  Snaps, Grommets, D-Rings, ETC
  
  
• 31358HN   This is a LEFT Hinged Narrow Cording Foot ideal for sewing very close to zippers, welting, cording ,Buckles,  Snaps, Grommets, D-Rings, ETC
  
  

  ---

  
  
• 40322SH   This is the MOST popular Zipper Foot used today. It is very narrow and split in the center so that you can get very close to EITHER side of a zipper or sew very close to Buckles, Snaps, Grommets, D-Rings, ETC
  
  
• MT3   This is the same as 40322SH Zipper Foot with a Solid Teflon bottom for sticky fabrics. (T363)
  
  
• S518   This is an "INVISIBLE" zipper foot. It is used to set all Concealed or Invisible Polyester or Nylon zippers. This is the Regular or Wide version. Many operators swear by this style as the only way to set invisible zippers!
  
  
• 211   This is a RIGHT Compensating Topstitch Foot that gives you a uniform topstitch 1/16" from the edge of your fabric. (CR1/16E)
  
  
• 212   This is a RIGHT Compensating Topstitch Foot that gives you a uniform topstitch 1/8" from the edge of your fabric. (CR1/8E)
  
  
• 214   This is a RIGHT Compensating Topstitch Foot that gives you a uniform topstitch 1/4" from the edge of your fabric. (CR1/4E)
  
  

  ---

  
  
• 120806   This is a Scroll Hemmer Foot. This Foot creates a beautiful 1/4" double fold on light to medium weight fabrics. (6)
  
  
• L36069H-1/8   This is a LEFT hand Hinged Piping Foot. This foot is used to attach 1/4" diameter piping or cording to your fabric. (P69LH)
  
  
• R36069H-1/8   This is a RIGHT hand Hinged Piping Foot. This foot is used to attach 1/4" diameter piping or cording to your fabric. (P69LR)
  
  
• S952   This is an adjustable combination stitching or shirring foot. With the rear screw turned completely out the foot sews like a regular sewing or seaming foot. As you turn the screw inward the foot begins to shirr. Continue to turn the screw clockwise for more shirring. ALL shirring feet will shirr EVEN MORE if you put your finger directly behind the presser foot and IMPEDE or PREVENT the feeding of the fabric.
  
  
• 120828   This is the Most Popular Standard shirring foot. This is the most commonly used shirring foot for light to medium weight fabrics. Put your finger behind the foot to prevent easy feeding for maximum shirring. (P50)
  
  

  ---

  
  
• 111R   This is a very popular Seam Ripper with Blade protector and a round plastic handle. This seam ripper will save you time whenever you need to remove stitches.
  
  
• 289   These are very common and useful thumbscrews used to attach your various Presser Feet to your machine. These Thumbscrews also attach hemmers, guides, and folders to the bed of Brother / Consew / Juki / Mitsubishi / Singer Style INDUSTRIAL Single Needle Sewing Machines.
  
  
• 25873   This is a 3 CORNER GAUGE. This very useful and versatile guide is used for a wide variety of edge-stitching or topstitching applications. The straight edge is for general straight edge stitching. The large gradual curve edge guide is for topstitching that is large and gradual. The small curve guide is for very sharp curves on smaller pieces. This guide is screwed onto the base of your machine with the included #289 Thumbscrews.
  
  
• 52237   These are highest quality Bobbin Cases for Brother / Consew / Juki / Mitsubishi / Singer Style INDUSTRIAL Single Needle Sewing Machines.
  
  

  ---

  
  

  This IMPOSSIBLE to find set will also fit:

  ARTISAN:  196R    5550N    8500N    ZJ-100

  BROTHER:   B705    B707    B715    B716    B735    B737    B738    B745    B755    B757    B758    B767    B781    PQ1300    PQ1500

  COLUMBIA:   N430

  CONSEW:   30    98    99    102    103    105    210    217    218    219    220    230    290    310    2230    7360R-1

  CUTLINE:   C220

  FEIYUE:   FY8500    FY8700

  GEMSY:   8700

  JUKI:   DDL-127    DDL-227    DDL-500    DDL-501    DDL-552    DDL-553    DDL-555    DDL-5550    DDL-5600    DDL-8300    DDL-8500    DDL-8700    DDL-9000     TL98E     TL98Q

  MITSUBISHI:   DB-120    DB-121    DB-122    DB-126    DB-130    DB-170    DB-189    DB-199    LS2-130    LS2-150    LS2-180    LS2-190    LS2-1130

  NECCHI:   SUPERNOVA JULIA

  RELIABLE:   MSK-8800    MSK-8550M    MSK-8870M

  REX:   RX8500

  RICCAR:   RD-102

  SINGER:   31-15    44    95    96    120U    121C    121D    188K    191D    195K    196K    241    251    281    366K   400W    402W    451K    491D    591D    600W    660A    691D    770D    771D    2191    2491D

  SUNSEW:   GC1130    GC5550    GC6180    GC8500    GC-B735    GC-C111

  SUNSTAR:   KM-123A    KM-123B    KM-137A    KM-137B    KM-146BL    KM-250

  TACSEW:   5550    T8700

  TAIKO:   TK-505    TK-510

  TOYOTA:   AD156    AD157    AD338    D146    D147    D347    D348    D1422-42    D2432

  TYPICAL:   GC6-1-D3E2    GC6150B    GC6150H    GC6150M    GC6160D3    GC6195M

  UNICORN:   LS2-H520    LS2-H530    LS2-H5100    LS2-H5200    LS2-H5300

  YAMATA:   FY8500    FY8700

  This High Quality Set will also fit many Home Sewing Machines that use HIGH SHANK Presser Feet. Look at the feet in the photo to see if your feet are shaped the same way. These HIGH SHANK Presser Feet have a Total Height of 1-1/4". But LOW SHANK Presser Feet have a total Height of about 7/8". These Feet WILL NOT fit LOW SHANK Home Sewing Machines.

  Never run your machine with ANY Zig Zag with these feet, ONLY Straight Stitch!

  Check Out our other Presser Foot Sets!

  5 PIECE ELASTIC PRESSER FOOT SET  #ELASTIC

  10 PIECE HEMMER PRESSER FOOT SET  #HEMMER

  6 PIECE PIPING PRESSER FOOT SET  #PIP

  4 PIECE QUILTER PRESSER FOOT SET  #QF1

  14 PIECE RAISING PRESSER FOOT SET  #RF1

  4 PIECE SHIRRING PRESSER FOOT SET  #SF1

  10 PIECE TEFLON PRESSER FOOT SET  #TF2

  16 PIECE TOPSTITCH PRESSER FOOT SET  #TS2

  9 PIECE ZIPPER PRESSER FOOT SET  #ZIPPER

  16 PIECE COMBINATION PRESSER FOOT SET  #IF3

  25 PIECE COMBINATION PRESSER FOOT SET  #IF2

  40 PIECE COMBINATION PRESSER FOOT SET  #IF

• Call 888-283-9640 if you have any questions regarding these presser feet.