SquareTrade ? AP6.0

Product Condition    You Are Buying A *Brand New* Item.  NEW QSC RMX5050 DJ POWER AMPLIFIER AMP RMX-5050 RMX 5050

Store Policy: A Paypal payment can only be accepted with a Confirmed Shipping Address. (a confirmed address can only be the Billing address of a credit/debit card/bank account; we only ship to Billing Addresses) If a paypal payment is received with an unconfirmed shipping address, it will be refunded; so please read our policy for more information! Buyers are responsible to provide a confirmed billing address on a paypal payment and are responsible to read our policy. We only ship to billing addresses if payment is received on paypal or over the phone. PO Box addresses are not accepted !! International Buyers (Canada, UK.): Must Call UPS (1800)263-8125 for the Cost of Border Charges Due to the Transfer Over the Border. We do not Charge or Collect Border Fees, UPS Does Upon Delivery!! Please Click on The Link Below to READ our Store Policy Before Purchase.  By clicking "Buy It Now", you place an order & agree to follow our Store Policy.   (Click to Read our Store Policy)  - Store Policy

We are Proud of our Fast Shipping !!

Contact Us Monday through Thursday: 10:00 am to 6:00 pm EST. Friday: 10:00 am to 4:30 pm EST No Weekend Hours. Phone: 718-331-1818  E-Mail: UGotADeal@OptOnline.Net

Specifications:  Stereo Mode, Both Channels Driven: 8 ohms (FTC 20 Hz-20 kHz 0.1% THD): 1050 Watts, 4 ohms (FTC 20 Hz-20 kHz 0.1% THD): 1600 Watts, 2 ohms (FTC 20 Hz-20 kHz 0.1% THD): 2000 Watts, 8 ohms (EIA 1 kHz 0.1% THD): 1100 Watts, 4 ohms (EIA 1 kHz 0.1% THD): 1800 Watts, 2 ohms (EIA 1 kHz 1% THD): 2500 Watts Bridge-Mono Mode: 8 ohms (FTC 20 Hz-20 kHz 0.1% THD): 3200 Watts, 8 ohms (EIA 1 kHz 0.1% THD): 3600 Watts, 4 ohms (EIA 1 kHz 1% THD): 5000 Watts   Distortion (SMPTE-IM): Less than 0.02% Distortion (Typical): 20 Hz-20 kHz: 10 dB below rated power: Less than 0.02% 1 kHz & below: full rated power: Less than 0.02% Frequency Response: 20 Hz to 20 kHz, 8 ohms, LF filter bypassed, +0/-1 dB; 5 Hz to 50 kHz, 8 ohms, LF filter bypassed, +0/-3 dB Damping Factor: Greater than 250 @ 8 ohm Noise (unweighted): 100 dB below rated output (20 Hz to 20 kHz, 8 ohm load) Input Sensitivity: 1.42 Vrms for 1050 watts into 8 ohms Controls Front: AC power switch, Ch. 1 & Ch. 2 gain control Controls Rear: 10-pole DIP switch featuring LF filter on/off, LF filter 30/50 Hz, Clip Limiter on/off controls for each channel & switches for selecting Stereo, Parallel, or Bridge mode. Push-button circuit breaker for each channel. Voltage Gain: 64x (36 dB) for 8 ohm load Input Impedance: 20 k ohm balanced, 10 k ohm unbalanced Indicators: Power-On: Green LED, Protect: Red LED Signal -30dB: Yellow LED, Clip: Red LED Connectors Input: XLR female, TRS (1/4-inch), & barrier-strip screw terminals, each channel Connectors Output: Binding posts & Speakon outputs (Ch. 1 Speakon wired for biamp) Cooling: Continuously variable-speed fan, rear-to-front air flow Amplifier Protection: Short circuit, open circuit, thermal, ultrasonic, & RF protection. Stable into reactive or mismatched loads Load Protection: On/off muting, DC fault output crowbar Power Requirements: 100, 120 or 240 Volts AC (±10%) 50-60 Hz (factory configured)120V models require 20 Amp, 120V service & are supplied w/a NEMA 5-20 plug on the cordset. Dimensions (WxHxD): 19" X 5.25" X 15.9"  Weight: 75 lb