NEW! Tamiya Rising Storm Racer Off-Road Kit 58334

SquareTrade © AP6.0

This is the 1/10 scale electric powered, radio controlled,
Tamiya Rising Storm off-road Racing Buggy kit.

FEATURES: Chassis: Plastic DF-02 style bathtub
Drive: Four wheel shaft drive
Motor: 540 size
Ball Bearings: Bearings located on spur gear shaft and inside diff
case, bushings located on wheels
Shocks: Four oil-filled plastic bodied
Gearboxes: Sealed front and rear
Differentials: Planetary gear
Transmission: Single-speed
Body: Clear untrimmed buggy style with rear wing
Tires: Spike treaded, Front, 3.25" (82mm) diameter, 1" (25mm) wide
Rear, 3.25" (82mm) diameter, 1.5" (38mm) wide
Wheels: 5-spoke white, Front, 2.25" (57mm) diameter, 1" (25mm) wide
Rear, 2.25" (57mm) diameter, 1.5" (38mm) wide
Speed Control: Electronic, with reverse and Kyosho type connector
Bumpers: Front and rear black plastic
Suspension: Double wishbone
Camber Tie Rods: Fixed non-adjustable
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Steering Tie Rods: Adjustable, caster/toe-in refers to the angle at
which the tires point inward as viewed from above
Steering: Bell-crank type
Servo Saver: Included

INCLUDES: One Tamiya Rising Storm off-road Racing Buggy with electronic speed
control, unpainted body, tires, wheels, 19 tooth pinion gear, 70
tooth spur gear, decal sheet and instructions

REQUIRES: Radio: 2-ch radio with standard servo
Radio Batteries: Eight AA size
Battery: 6-cell flat with standard connector
Charger: AC/DC timed or peak for 6-cell battery
Misc. Items: Building and track equipment

SPECS:      VEHICLE-
Length:     15.5"  (395mm)
Width:       9.8"  (249mm)
Height:      5.9"  (150mm)
Weight:   2.6 lbs  (1195g) without battery
Wheelbase:  10.5"  (267mm)
Front Tread: 8.6"  (219mm) side to side at wheel centers
Rear Tread:  8.25" (209mm)
Front Track: 9.5"  (241mm)
Rear Track:  9.6"  (245mm)
Ground Clearance:  1" (25mm)
Tires- Front:  2.25" x 1" (57mm x 25mm)
Rear:   3.25" x 1" (82mm x 25mm)
BODY-
Length:      9.9" (251mm)
Width:       6.4" (162mm) at widest point
2.5"  (63mm) behind from wheels (thinnest point)
Height:      2.7"  (70mm)

COMMENTS: For replacement or upgrade to Ball Bearings use:
Qty.  Size      Location               Order Bearing Set Qty.
4     5x11mm    Front Wheels            2    DTXC1547
4     5x11mm    Rear Wheels             2    DTXC1547
4     5x11mm    Spur Gear Shaft         2    DTXC1547
2     8x12mm    Differential            1    DTXC1581

Body pictured on the box is painted hot pink and white with all
decals applied.

Check out my other items!

Be sure to add me to your favorites list!

Use the FREE Counters 1 million sellers do - Andale!