|
The ACHI IR-3000 is a duplex IR heating BGA rework station. It can be afforded to weld, remove and rework the applications with different packages and mutil-level base board such as BGA,PBGA,CSP and make lead-free welding. The target of this product is BGA packages (including north and south bridges Chipsets) of the main boards and video cards of notebooks, desktops, XBOX, switches and so on.
Its features contains as follow:
1. Duplex IR heating system. Large IR pre-heating from the bottom will heat the PCB evenly to avoid deformation and keep solder effect, heating board is independent controlled , in contrast with Hot Air Heating, the process of heating is more stable. More, there is no nozzles required and can help you save the costs.
2. Independent heating for the top and bottom sides, also Independent heating up for the both sides. In this way, it is easier to control. Also, Over and Under Heat Alarm.
3. We have taken full consideration to the situation of small workshops and cut down the costs as possible while this product can realize the main functionalities (BGA manual welding, lead-free soldering) of the advanced rework system.
4. The station is parted designed, with high quality, and can be handled conveniently. Use of innovative design, do not need to connect your computer can easily operate
5. No hot air flow in process of rework, does not affect the surrounding micro-components
6. The upper part of heating a large area can easily rework the various CPU block, all kinds of shielding enclosures, replacement of various components slot
7. The machine can be very reliably to replace the double-layer BGA chips.there won’t solder paste betweem Double-layer BGA chip .
8. The machine can heat chip BGA solder ball directly, steel mesh is not deformed in the heating process
9. The machine can do the circuit board drying and shaping circuit board
10. In addition, we have prepared an introduction for you, and the supplementary instruments in it are common. By the guide of the introduction, you can master the skills even you know nothing of BGA manual welding.
Specifications
The heating elements: Dark Infrared 400w
Applicable BGA size: ≤65mm×65mm
Bottom preheating components: Infrared 800W
Bottom preheating components size: 180 mm×180 mm
The heating regulation: Up and down Left and right
Fixed mode: Slide bracket
assist illume: have
Forced cooling fan:none
heating time control: none
power: ≈1300W
weight: ≈12.5KG
ACHI® BGA repair station product performance comparision
|
Model
project |
IR-3 |
IR3000
|
IR-PRO |
HR-PRO |
|
The heating elements |
Dark Infrared
300w |
Dark Infrared
400w |
Dark Infrared
400w |
Sirocco 800w |
|
Applicable BGA size |
≤50mm×50mm |
≤65mm×65mm |
≤65mm×65mm |
≤40mm×40mm |
|
Bottom preheating components |
Infrared 600w |
Infrared 800w |
Infrared 2000W |
Infrared 2000W |
|
Bottom preheating components size |
180mm×180mm |
180mm×180mm |
260 mm×245 mm |
260 mm×245 mm |
|
The heating regulation |
Up and down |
Up and down
Left and right |
Up and down
Left and right
From begainning to end |
Up and down
Left and right
From
Begainning to end |
|
Fixed mode |
stents |
Slide bracket |
Alien stents, stents |
Alien stents ,stents |
|
assist illume |
none |
have |
have |
have |
|
Forced cooling fan |
none |
none |
have |
have |
|
heating time control |
none |
none |
have |
have |
|
power |
≈900W |
≈1300W |
≈2550w |
≈2850W |
|
weight |
≈12.5 KG |
≈12.5 KG |
≈27KG |
≈27KG | |