Ni-MH Ni-Cd LiFePO4 Li-ion battery smart quick charger!

> Description:
Charger for 1.2V Ni-MH/Ni-Cd, 3.2V LiFePQ4 or 3.6-3.7V Li-ion rechargeable battery with different size, Such as D/C/SC/AA/AAA/AAAA cylindrical Ni-MH/Ni-Cd battery, F6 Square Ni-MH/Ni-Cd battery; As well as 16340(123A)/18500/17670/18650 cylindrical Li-ion or LiFePO4 battery etc. The  battery diameter size can variety from 8MM to 34MM, Length can variety from 28MM to 68MM. It can charge 1 or 2 cells with same type every time.

> Technical parameter:
Input: 100-240V, 47-63Hz (Worldwide voltage)
Output: 1.2V/800mA for Ni-MH/Ni-Cd battery; Full charged Vmax:1.40-1.43V;
            3.2V/800mA for LiFePO4 battery, Full charged Vmax: 3.60-3.65V; 
            3.6V/800MA for 3.6-3.7V Li-ion battery; Full charged Vmax:4.17-4.23V;

> Product characteristic:
1. Patent design, higher charge reliability;
2. Automatic distinguish battery from 1.2V Ni-MH/Ni-Cd battery, For 3.2V LiFePO4 and  3.7V Li-ion battery and need to switch between "3.6" and "4.2";
3. To protect battery by detecting charging current and Vmax during charging, process, Can auto-stop after full charged and have LED lamp to indicate charge state;
4.We can also identify charge state from indicate LED: “red” stand for in charging, “green” stand for full charged or standby state(no battery); For Ni-MH battery, the LED will be flash between “green” and “red” after full charged, It indicated the battery full charged if the stand time of “green” longer than “red”; Have stream charge after full charged. The LED indicate “red” sometimes although the charger still plug in AC power, It is caused by voltage down after full charged.
5. The charger can protect when put the battery with  reverse polarity or a short-circuit cell;
6. For higher inter-resistance battery, the LED of charger will flash quickly, wile the charge current is lower into stream charge, the battery full charged until the LED flash slowly.

> Full charged time of single battery(Reference):
  In general, charge time of 2 cells is twice of single cell. It is more longer for higher inter-resistance battery; for example, a battery used for a long time caused inter aging.
 

> Test data of full charged voltage for 50pcs batteries:
Voltage(V)

4.21  4.22  4.21  4.19  4.17
4.20  4.18  4.22  4.22  4.19
4.21  4.22  4.20  4.21  4.19
4.21  4.21  4.21  4.19  4.21
4.21  4.22  4.21  4.21  4.20
4.22  4.22  4.19  4.22  4.22
4.22  4.22  4.22  4.22  4.21
4.20  4.23  4.20  4.22  4.23
4.22  4.22  4.20  4.21  4.19
4.22  4.21  4.20  4.23  4.22
Average 4.21 Min 4.17 Max 4.23

Spec.: 4.20+/-0.05 

> Package items:
Charger only.

> Caution:
1. Don’t charge primary battery;
2. Don’t charge 1.2V 3.2V and 3.6V battery at the same time;
3. Don’t charge different size or type battery at the same time;
4. Don’t disassembly the charger;
5. Put the battery on first slot (Marked”1”)when charge only one cell.