ONE TAG KIT 1/2 GALLON ELEPHANT SNOT & 1QT SHADOW MAX

ELEPHANT SNOT
General Description:
If it is a "porous" surface, then ELEPHANT SNOT Graffiti Remover is the right choice for the job. ELEPHANT SNOT is the workhorse for the most difficult of porous surface removal requirements - ELEPHANT SNOT penetrates deeply into concrete, cement, brick, grout, stone, virtually anything porous to dissolve and loosen all types of tags, and in many circumstances, simple water hose pressure will do the job.

RECOMMENDED FOR REMOVAL ON:
Brick, mortar, masonry, cement, concrete, stucco, terrazzo, pavers, porous tile. Natural stone surfaces such as granite, marble, sandstone, rocks, both porous/rough or polished. Also effective on: glass, ceramic, porcelain, glazed tiles, grout.

FEATURES & BENEFITS

GENERAL INSTRUCTTIONS

SPECIFICATIONS/GENERAL PROPERTIES

CONSISTENCY

No drip gel clings to vertical surfaces without dripping.

COVERAGE

100 to 200 Sq. ft./gal. depending on porosity of surfaces.

USE TEMPERATURES

Use in temperatures down to 25 degrees, will work slower at cold temperature.

STORAGE

Stores between 40°F and 130°F. DO NOT FREEZE. If frozen, thaw and remix before using.

FLAMMABILITY

Nonflammable, non-combustible. Flash point over 200°F.

V.O.C.'s

.4 Ibs/gallon, 50 grams/liter H.A.P.S. - none.

VOLATILITY

Very low rate of evaporation. No ventilation required unless used in a confined space.

BIODEGRADABLE

Yes.

SHIPPING

Not regulated, D.O.T. Proper shipping name: Cleaning Compound N.O.S., Class 55.

EFFECTIVE ON THE FOLLOWING:

Spray paint graffities, marker, pen, ink, crayon, shoe polish, lipstick, pencil, and most other graffiti marks and stains.

Other Uses:

Removes road tars, asphalt, oils, greases, gum, wax, tree sap, and many other difficult to remove marks or stains, from all types of porous or other recommended surfaces. Paint spills on floors, adhesives, caulking compounds, spray booth over sprays, even many difficult to remove 2--part paints, epoxies, urethanes, can be removed effectively with ELEPHANT SNOT.

NOTE: If removing "shadows or ghosts" from any of the above surfaces, we recommend the use of SHADOW MAX Graffiti remover for maximum effectiveness.

For removals from all types of metals, "durable" baked on painted surfaces such as auto, bus, truck, other factory applied paints, fiberglass or bare wood, use our SMOOTH MAX Graffiti remover.

____________________________________________________________________________________________________________________________________________

SHADOW MAX
General Description:
"SHADOW MAX" Graffiti Shadow remover is one of 6 "Graffiti Max" products, each custom formulated for specific Graffiti removal needs. If you are removing shadows or "ghosting" from any porous surface SHADOW MAX is the right choice for the job.

RECOMMENDED FOR REMOVING GHOSTING OR SHADOWS ON:
Brick, mortar, masonry, cement, concrete, stucco, terrazzo, pavers, fieldstone, porous tile. Natural stone surfaces such as granite, marble, sandstone, rocks, both porous/rough or polished. Porcelain, glazed or ceramic tiles, grout.

FEATURES & BENEFITS

• Super penetrating action for maximum wet out or stubborn shadows and ghosts.
• Fast removals - maximum wet out and penetrating action gives MAXIMUM removal speeds.
• Low odor with minimum or no ventilation requirement for added safety, indoors or out.
• Water hose pressure removal option for "no pressure washer required" benefits.
• Nonflammable, noncombustible, minimal fire hazard formulary. No special storage requirements.
• All temperature effective removals from freezing cold to "very hot" conditions.

GENERAL INSTRUCTIONS

• Wear protective eye wear and gloves. Protect all exposed skin areas with chemical resistant covering. Use respirator if sprayed.
• Apply by spray, brush, roller. Clean up all equipment after each use with water wash.
• Allow to penetrate marks for 15-20 minutes (longer in cold temps.)
• Use power washer with 15° tip with 1000 - 3000 PSI maximum pressure. For optimum performance and removal speed use hot water (190°F.)
• Alternative Method: Allow to penetrate for 30-35 minutes, agitate with stiff brush, and remove with water hose at maximum nozzle pressure.
• Repeat process if necessary.

SPECIFICATIONS/ GENERAL PROPERTIES

CONSISTENCY

Thin liquid with maximum wetting and penetrating action.

COVERAGE

150 to 300 Sq. ft./gal, depending on porosity of surfaces.

USE TEMPERATURES

Use in temperatures down to 25°F, will work slower at colder temperatures.

STORAGE

Stores between 40°F and 130°F. DO NOT FREEZE. If frozen, thaw and remix before using.

FLAMMABILITY

Nonflammable, non-combustible. Flash point over 200°F.

V.O.C.'s

.4 Ibs/gallon, 50 grams/liter H.A.P.S. - none.

VOLATILITY

Very low rate of evaporation. No ventilation required unless used in a confined space. Use respirator if sprayed.

BIODEGRADABLE

Yes.

SHIPPING

Not regulated, D.O.T. Proper shipping name: Cleaning Compound N.O.S., Class 55.

EFFECTIVE ON THE FOLLOWING:

Shadows, ghosting or residues that may occur on porous surfaces, after using conventional graffiti removers. These include shadows, ghosts or residues left by spray paint, markers, inks, dyes, shoe polish, and most other graffiti shadows or ghosts.

Other Uses:

SHADOW MAX Graffiti Shadow Remover is specifically formulated, and recommended for use, only on ghosts, shadows or other graffiti residues and should not be used for any other purpose/removals, without thoroughly testing for effect.

NOTE: For removals from all types of metals, "durable" baked on painted surfaces such as auto, bus, truck, other factory applied paints, fiberglass or bare wood, use our SMOOTH MAX Graffiti remover.

SHIPPING COSTS: We ship UPS Ground please call for total costs. 1-800-891-0091

WE ACCEPT VISA/MASTER CARD FOR PAYMENT

NET WEIGHT IS 10 POUNDS