OUTDOOR WOOD FURNACE , BRAZED PLATE HEAT EXCHANGER 40P

SquareTrade © AP6.0

   TECHNICAL DATA:
Type: Brazed Plate Heat Exchanger
Plate Material: ASTM 316L Stainless Steel
Dimensions: 12" long x 4 1/4" wide (see the photo below for reference: a x b sizes respectively)
Outlet sizes: 1" Male IPS (MPT) threaded nipples, ASTM standard
Min. operating temperature: -256 F
Max. operating temperature: 437 F
Max. design pressure: 435 psig THIS PRODUCT IS UL LISTED OTHERS ARE NOT SO BE CAREFUL DON'T FIND OUT THE HARD WAY 110% price guaranty only at Andersons THIS IS A 40 PLATE LARGE STYLE HEAT EXCHANGER.        If you find the same item buy it now priced on ebay for less and you buy our  same item, we will send you a 110% of the difference.  Good at time of purchase .   To get the refund simply send us the current item # you have found that is less and we will send you the refund.  Item may not be an expired listing.  NO need to shop, buy here with confidence.   MAX PRESSURE IS 435,THE    THE LENGTH IS OVER 12 INCHES . THE TREADED NIPPLES ARE 1 ID    DONT BE FOOLED BY SMALLER UNITS NOT 12 INCHES LONG DON'T SETTLE FOR LESS QUALITY.  YOU ARE BUYING A 40 PLATE BRAZED HEAT EXCHANGER    MADE FROM 316 STAINLESS STEEL AND IS BRAND NEW.  THIS UNIT WILL MAKE YOUR HEAT EXCHANGE MORE EFFICIENT WITH YOU BOILER AND OUTDOOR FURNACE OR INDOOR FURNACE.  DO NOT DELAY . To see product CLICK  OR CALL 877.339.0061 toll free TY JEFF  

 HOW TO BUY A BRAZED PLATE HEAT EXCHANGER

1. The most important thing is the length and width of the heat exchanger.  Ours are 12  inches. This is important as it has the most heat transfer area. It's not how many plates the exchanger has that is important but first as stated above the size!!!!!!

2. The port size is important. Most furnaces use 1 inch tubing so make sure you are not buying 3/4 inch ports as this will decrease water flow to the rest of your system. Ours are 1 inch.

3. Make sure you properly size your heat exchanger. Here is a guide based on 12  inches

A. 10 plates are used for domestic hot water or small infloor heat areas less than 1100 sq ft. will work with the largest of domestic hot water systems and should never need to be larger that this unless you will be using domestic hot water for more that 3 hours straight at one time.

 B. 20 plates are used for smaller homes from 1000-2500 sq ft

C. 40 plates are used for larger homes from 2500-4500 sq ft

D. 70 plates are used for areas 5000-7000 sq ft areas.

The above is a guide to help you. If there is any question always buy the next size larger just to make sure. All items above are based again on 12  inch with 1 inch ports 

4. Make sure you have a good warranty and make sure that the person you buy from sells only heating products as the others may not be there to service you down the road.

 LIFETIME WARRANTY AGAINST MFG DEFECTS. CUSTOMER IS RESPONSIBLE FOR THE RETURN AND SHIPPING OF THE NEW EXCHANGER. THIS WARRANTY  CAN BE OBTAINED BY WRITTEN REQUEST TO    ANDERSON'S OUTDOOR WOOD FURNACE CENTER N5526 HY 57 PLYMOUTH WI 53073 OR EMAIL CAMPREDEYE2@CS.COM WE ARE A FULL TIME OUTDOOR WOOD FURNACE COMPANY FOR OVER 7 YEARS THIS IS ALL WE DO GIVE US A CALL AND FIND OUT OUR KNOWLEDGE SO WE CAN MAKE SURE YOU PROJECT IS DONE THE CORRECT WAY THE FIRST TIME THANX 877-339-0061 OR 262-339-0061

Powered by eBay Turbo Lister

 BRAND NEW, LARGE-STYLE
40-Plate, ASTM 316L Stainless Steel
Brazed Plate Heat Exchanger with 1" MPT outlets.

For use with outdoor wood furnaces (boilers),
hot water recirculation systems, 
snowmelt systems, solar systems and more.

6% DISCOUNT FOR CREDIT CARD ORDERS INQUIRE FOR DETAILS LIFETIME WARRANTY