Pinball MPU Board 3AA Battery Holder Upgrade KIT

 This kit is for locating the battery away from your pinball MPU board. Moving the battery away from your pinball machine's MPU board will prevent your board from being damaged by corrosion from leaky NiCads. This kit includes: a 3AA battery holder, diode, heat shrink tubing, and enough wire to locate the battery holder at least 2 feet from your MPU board. When you install this, you may use either NiCad batteries, or alkaline batteries. NiCad batteries are what were originally installed on your MPU board, but alkaline batteries will not wick up the wires and corrode your board again. Just install the diode if you intend to use alkaline batteries. An instruction sheet is included to help you with proper hookup.

Buyer to pay low shipping as stated in the shipping details.  International bidders please contact me for shipping costs if not specified in the ebay shipping details. Credit cards accepted through Paypal. I also accept Personal Checks, Certified Checks, or Money Orders. I reserve the right to hold shipment until a personal check clears, but have been known to ship immediately if buyer has favorable eBay feedback. I always leave feedback to buyers. Thank You for considering my auction.

Special notes: Some knowledge of electronics and soldering skills are necessary for installation of these components.

THANKS for your interest. Watch for the development of other useful Pinball upgrade/repair kits in the future from eBay user "CNMGERB".