
Bidding has ended on this item. Item:Plasma, HDTV, LCD, or Wide-screen TV Stand Storage

	EWINS ITEM NUMBER: EWINS 10351

Ewins Plasma, HDTV, LCD, or Wide-screen TV Stand with Storage

MSRP: $419.99
Bid starting at only $179.99!

This cabinet is perfect solution to a growing music or video collection. Plenty of room to organize and store CD's, DVD's, VHS tapes or any combination of these different types of media. Doors rotate open 180-degrees on sturdy hinges. Spacious shelving affords plenty of room for components, with convenient cut-outs for cords to slip neatly out of sight behind the unit. Top designed to hold widescreen media units. Crafted from solid pine. Item arrives unpainted and unassembled.

Features:

* Closed: 50"W x 15"D x 35 1/2"H
* Open: 70 3/4"W x 16 1/2"D x 35 1/2"H.
* Inside Door Shelf Dimensions: Height: 28" Width: 10" Depth: 5.5"
* Outside Door Shelf Dimensions: Height: 29.5" Width: 11.5"
* Door Face Dimensions When Closed: Height: 29.5" Width: 11.5"
* Assembly Required
* Adjustable Shelves ( inside )

This is a step by step assembly instruction for the Ewins Plasma, HDTV, LCD, or Wide-screen TV Stand with Storage.

This cabinet is perfect solution to a growing music or video collection. Plenty of room to organize and store CD's, DVD's, VHS tapes or any combination of these different types of media. Doors rotate open 180-degrees on sturdy hinges. Spacious shelving affords plenty of room for components, with convenient cut-outs for cords to slip neatly out of sight behind the unit. Top designed to hold widescreen media units. Crafted from solid pine. Item arrives unpainted and unassembled.

	28- Connector bolts 28- Cams 28- Wooden Dowels 60- Shelf Supports 14- M4x30 Screws 12- M4x15 Screws 20- M3x15 Screws 2- Magnetic Latches w/strike plate 2- Wooden Knobs 2- M4x25 Bolts (not pictured)
	Locate the base of the Media Center and gather 8 connector bolts. Using a Philips screwdriver tighten the connector bolts into the threaded inserts already attached to the base. Set aside for future use.
	Locate the top of the Media Center and gather 8 connector bolts. Using a Philips screwdriver tighten the connector bolts into the threaded inserts already attached to the base. Set aside for future use.
	Locate the left and right side, side vertical supports and the left and right side center vertical supports. The vertical side supports will have a on of the long side edges rabbeted (grooved) The edge with the groove is the inside back of the support. The center supports will have series of holes for the shelf supports on both sides. The side that has holes that match up with the side vertical supports should installed facing the vertical side supports.
	Once you have located and paired the vertical supports gather 8 wooden dowels and insert them into the center hole in the top and bottom edges of the vertical supports.
	Gather the base, top and vertical supports. With the base setting on its feet place the vertical supports on the base as illustrated in the photo. Once complete locate the top and position on top of the vertical supports. Make sure at this point that all the edges of the base top and side vertical supports with rabbet are all on the same side. Gather 8 of the connector bolt cams and insert in the cam holes with the arrow on the cam point in the direction of the connector bolt. With a Phillips head screwdriver rotate clockwise until tight this should be about half to quarter turn.Do not over tighten. This is a good time to inspect the shelf support holes making sure that they align with the holes opposite them. If not loosen cams and make adjustments to the vertical pieces that are not aligned.
	Locate the hardboard back, and gather 20 M3x15 screws. Press the hardboard back into the rabbet (groove) on the rear of the media center. And secure using the screws.
	Locate the Shelf door frame pieces. Gather the hinged door frame sides the non hinged door frame sides and the top and bottom door frames sides. Examine the edges of the top and bottom door frames sides . The two piece that have two small pilot holes on one of the long side edges are the bottom pieces. Take one hinged side and on non hinged side. Make sure the shelf support holes align with one another when dowel holes on long side edge are facing up. This means you have found a mirrored pair.
	Gather 4 connector bolts and 4 wooden dowels. Locate a paired top and a paired hinged and non hinged side. Insert the connector bolts in the threaded inserts and tighten. Insert 2 dowels in the dowel holes on the top side frame piece then repeat for the bottom side piece.
	Insert the connector bolt into the connector bolt holes on the top and bottom frames pieces and press together. Insert a cam in each hole and tighten. Locate the non hinged frame side piece and gather 4- M4x30 screws. Using the pilot holes as a guide fix the non hinged side piece the other assembled parts . See illustration.
	Lay the door frame assemble flat with the Dowel holes face up. Gather six wooden dowels and insert into the dowels holes. Locate the Shelf -door door panel and lay face down. Gather 4 connector bolts then using a Philips screwdriver tighten the connector bolts into the threaded inserts already attached to the door panel. Insert the connector bolts in the connector bolt holes on the door frame assembly using the dowels as a guide and press on together.
	Turn the door panel and frame assembly face down. Gather four connector bolt cams insert into the cam holes and tighten cams.
	Stand the Assembled shelf door up vertically and gather 12 self supports. Locate three of the shelves and gather 3- M4x30 screws. Place the shelves on the shelf supports and attach the shelf to the unit using the pilot holes located in the non hinged side as a guide. Repeat these steps for the opposite door.
	To hang the doors gather 6- M4 x 15 screws. With the door in a open postion, take one screw and using the pilot hole as a guide start on screw in the center hole of the top hinge. do not tight en all the way. next start a second screw in the center hole of the bottom hinge using the pilot holes as a guide. Do not tighten all the way. Start the rest of the screws alternating tightening between top and bottom screws until all screws are tight. Repeat this procedure for the opposite door.
	Locate on of the magnetic latches and one of the strike plates. Gather four M3x15 screws. Using the pilots holes located on the base of the media center attach the magnetic catch. Using the pilot holes located on the outside front edge of the bottom of the door attach the striker plate with the remaining two screws. Close the door and feel for some resistance when you go to open it .Or listen for a metallic click when you shut the door. If you feel or hear neither. Loosen the screws on the magnetic latch an slide forward. There grooves in the latch that allow for fine tuning. Repeat this process for the opposite side.
	Locate on of the wooden knobs and one of the M4x25 bolts. Inert the bolt through the hole and thread the knob on to the exposed end of the bolt. Using a Philips head screw driver to hold the head of the bolt firm use your hand to tighten the knob. Do not over tighten. Repeat this process for the opposite side.
	Gather the remaining shelf supports and insert into the remaining shelf support holes and insert the shelves The shelves in the center of the Media center are adjustable. SO make sure you place close attention when you insert the shelf supports that you have the correct spacing on each side. Congratulations you have successfully assembled your new Ewins Plasma, HDTV, LCD, or Wide-screen TV Stand with Storage.

Using eBay's email system?
Please note we cannot respond to hidden email addresses.

Shipping Information

Shipping Cost: $99.99
(Rate only valid for the lower 48 United States. HI, AK, FPO/APO & US Territories Excluded.)

Our multiple warehouse distribution system and same-day order processing gets your order to you fast and at a great price.

Payment Information

When your ebay transaction is complete, you can pay instantly with PayPal from this page. In addition, you will receive an email directing you to our PayPal checkout and alternative payment methods.

All major credit cards accepted.

Alternative payment methods
By Phone: Call our order desk at 800-445-1895 and one of our Customer Service Representatives will process your order. Please have your ebay auction number ready!

Ewins
Attn: Customer Service
C/O Kelly Supply Company
PO Box 1328
Grand Island, NE 68802-1328
800-445-1895

Seller's Terms

Ewins has been a professional volume business leader since 1903. We want you to be happy with your purchase. Please review the following terms and conditions to ensure your satisfaction.

Important: do not bid or purchase if you have any doubt about completing this transaction. We will pursue non-paying bidders to the fullest extent of eBay policy. If you have questions about this or any Ewins product, we welcome your emails and phone calls. Email us at info@ewins.com or call us at 800-445-1895.

Returns: unused product may be returned within 30 days of purchase. Outgoing freight will not be refunded. You are responsible for shipping the returned item. All returns will be assessed a 25% restocking fee unless otherwise arranged. Email info@ewins.com to arrange returns.

Goods damaged in transit: we insure all shipments. If your item is damaged in transit we will work with you to get a replacement as soon as possible. To ensure speedy processing, be sure to note the damage to the delivery agent and notify info@ewins.com as soon as possible.

Shipping and handling

Item location: Omaha, NE, United States

Shipping to: United States

Change country:	ZIP Code:

Shipping and handling	To	Service	Estimated delivery*
US $99.99	United States	Other (see description)	Varies Seller ships within 3 day after receiving cleared payment.

*The estimated delivery time is based on the seller's handling time, the shipping service selected, and when the seller receives cleared payment. Sellers are not responsible for shipping service transit times. Transit times may vary, particularly during peak periods.

Domestic handling time	Sales tax
Will usually ship within 3 business days of receiving cleared payment.	Seller charges sales tax for items shipped to: CO(7.772%), IA(7.0%), KS(7.3%), NE(7.0%), SD(6.0%) . Tax applies to subtotal + S&H for these states only

Return policy

Item must be returned within

Refund will be given as

Return policy details

30 days after the buyer receives it

Money Back

You may return your unused purchase for any reason within 30 days of
receipt for an exchange or a refund of the purchase price excluding our
shipping and handling costs.

All items carry a 25% restocking fee which will be deducted from your
refund should you wish to make a return.

All items must be unused and in original packaging. Please note any
merchandise returned that is damaged will be refused.

The buyer is responsible for return shipping costs.

Payment details

Payment method	Preferred/Accepted	Buyer protection on eBay
	PayPal Preferred	Pay with and your full purchase price is covered \| See terms
Visa/MasterCard, Amex, Discover	Accepted	See your credit card issuer's terms

Seller's payment instructions

Please use eBay checkout to complete your sale. If you cannot use eBay checkout, you may call us directly at 800-445-1895 or visit us online at http://ewins.com/ - Sales tax applied in CO, KS, NE, SD and IA. We do not ship outside the USA. We do not ship to post office boxes, including PO, APO, FPO et. al..

Plasma, HDTV, LCD, or Wide-screen TV Stand Storage

Ewins Plasma, HDTV, LCD, or Wide-screen TV Stand with Storage