The twin flash combo covers
the everthing you need
basically for outdoor portrait photography:
1. Flash Hot Shoe
Adapter as FS-1100
This flash hot-shoe adapter connects all third
party
flashes to the hot shoe of all Konica Minolta digital cameras and of
Minolta xi and x series film cameras. This is a third-party replacement
for the original Konica Minolta FS-1100 hot shoe adapter. It works with
the most recent Sony Alpha DSLR as well.
2.
Thyristor Twin
Flashes (x2)
This
Twin Flash places light where, and when you want it!
It includes an adjustable flash heads that can be
tilted
vertically at angles 45º, 90º, 135º or
180º degrees. It can also turns 360º degrees
horizontally.
You can use twin flash
with the sub-reflector switched
on for bounce flash operation. Bounce flash can make a softer effect
and eliminate shadow on your subject. When you shoot directly at your
subject, you might switch off the sub-reflector and use single flash
only.
This
versatile energy-saving thyristor flash has good
power and provides you with quicker recycling times, especially when
the subject is close.
The BUY IT NOW package includes TWO twin thyristor
flashes. With the assistance of two flashes, you can produce a natural
lighting effect from different light sources.
3.
Cactus Wireless
Flash Trigger V2 (x1) and Receiver V2
(x2)
This
wireless slave flash trigger unit triggers other flash units when
the transmitter is activated. Several flash units work together helps
fill in shadows and improve the evenness of lighting.
Three components are included in this
BUY IT NOW package, a transmitter
and two receivers. The transmitter is to be attached on the hot shoe of
the camera while the receivers are to be attached to external flashes.
Each receiver works with one flash. You can use as many flashes as you
wish as long as you have enough receivers.
With the wireless flash trigger, you
can place the flashes at different
angles and distances from the object. This is particularly useful for
portrait and product photography. Most importantly, without the need to
connect the flash by wire or cable, you can move the flashes to
anywhere that produces the best lighting to the object you shoot.
Flexibility provides you with the best result.
4.
Flash Diffuser
(x2) and Foldable Around-the-lens Diffuser (x1)
Flash units produce a harsh light,
even when you use it with the little
plastic built-in diffusers / reflector of the flash. To work close to a
subject, you might need to soften this light. Two flash diffusers in
this BUY IT NOW package (one for each flash) are here to help. Flash
diffusers not only diffuse the light, they spread the light as well. It
reduces the maximum working distance between your flash and the object.
You can use this diffuser simply by fitting it in the flash head direct.
On the other hand, the foldable
around-the-lens diffuser included in
the package can be attached directly to the lens of your camera via the
hole in the centre. This flash diffuser is very light and handy. It can
be easily folded into a round shape with diameter less than 11.5cm. Net
weight is only 29g. It could work to soften the hard light not only
from the external flash, but also from the built-in camera flash.
5.
U-shaped Flash
Bracket w/ 90 degree flash rotate (x1)
The U-shaped flash bracket is a
perfect assistance in holding the
external flash in a certain distance with the camera. This is to
prevent the direct flash to be produced by placing the flash
unit on the camera's hot shoe. With the help of the bracket, the flash
unit could be positioned a bit higher than the camera or the either
side of the camera to produce fill flash and bounce flash without the
need of an assistance.
Back to home page
) 
Gadget Infinity
Print
Report item
and your 