PowerCost Monitor Home Electricity Meter BLI 28000 NEW

• No interference and no electrician required
• Large 100 foot range
• Programmable for local utility rates - flat, multi-tiered, on/off peak
• New! Appliance function allows you to zero out base consumption and measure how much energy and dollars are contributed by specific appliances and actions
• New! Predictive function allows you to estimate energy use and cost for the next 30 day period
• New! Accommodates Kh factors of 0.1 to 99 to ensure compatibility with high load service homes in North America today
• New! Sleep function prevents battery run down should monitor and sensor lose connectivity
• New! Sensor redesigned to prevent water leakage
• Includes 4 AA Batterie

Start saving on your electricity bill right away with a PowerCost Monitor.
The success of this simple, attractive device is based on the proven value of real-time feedback - helping householders save from six to 18 percent on their monthly electricity bills.

Featured in The Wall Street Journal - July 10, 2007; Page D1

With a PowerCost Monitor you'll be able to see at a glance:

• The amount of electricity your home is using from moment to moment
• The electricity consumption of specific electrical appliances in your home so you can single out the power hungry units and take action
• The total amount of money you are spending on electricity

The PowerCost Monitor is an excellent tool to help you save. By keeping the current value of the Display Unit as low as possible you will use less electricity - up to 18 percent less every month.

And that means, not only are you saving on your electricity bill every month, but you're also reducing greenhouse gas emissions; and reducing demand on the power grid.

The PowerCost Monitor features an attractive, counter-top Display Unit that looks like a small electric clock. At the push of a button it displays, in real-time, your moment-to-moment and total electricity costs in dollars and cents and in kilowatt hours.

You will also be able to see your peak energy cost within the last 24 hours. It also displays the time and outside temperature (F or C) at your meter location. A battery indicator lets you know when your battery power is low and a signal indicator lets you know the strength of the signal being received from the Sensor Unit.

For more information about the PowerCost Monitor, including how it works and what is included, see the More Info tab.

• Packaged Unit Weight: 1.7 lbs (.75kg)
• Width: 8.3 in (21.1 cm)
• Height: 8.5 in (21.6 cm)
• Depth: 4 in (10.2 cm)

• Sensor:
  • Standard: 2 Alkaline AA 1.5 Volt (LR6 type) batteries (included)
  • Extreme cold weather: 2 Lithium AA 1.5 Volt (L91 Type) batteries
• Display: 2 Alkaline AA 1.5 Volt (LR6 type) batteries (included)

• Frequency: 433 MHz
• Range: Approximately 100 feet (30 m). Subtract 15 feet (5 m) for each wall between sensor and monitor
• Updates from sensor to display unit: every 30 seconds

• Display Unit: 10° C to 45° C (50° F to 113° F)
• Sensor Unit: -40° C to 60° C (-40° F to 140° F)

• One year material defects or workmanship.

• ±1% at meter

• Compatible with most traditional electromechanical disc, digital meters, AMR, AMI, and Smart Meter technologies.
• kH factor setting 0.1-99.9