Proud to present you with a 225mW, model 660-225 OEM RED Laser Module
(Retail: $500.00 if you can find one)

Add this to your arsenal of laser Effects to make "Liquid Sky" , "Fan" or "Tunnel" effects. Or add it to your other color laser in your homebrew lasershow projector.. These sport Analog modulation to well past 30khz with a flat frequency response and very linear. You can feed these with an inverted TTL signal and they will do very well.

This is a NEW RED laser module mounted in a NICE heatsink...It has a built-in Diode Driver It has a Current and Temperature tracking circuit... Most RED lasers here on eBay are only 5mW in power; this unit is over 45 times more powerful. This particular one measured 227W on my Melles Griot meter on the 300mW scale which agrees with the Scientech 365 (228mW) ......This unit was tested for 48 hours Beautiful...........

This is NOT a cheap Export laser...This is Made in America,

Beware of of cheaper modules claiming to be 650nm when they are really 658nm,Or confusing Specs claiming thay are Analog when they are TTL or cannot be modulated

WE are really surprised how thin the beam is ...less than 2.7mm. at less than .7mR.
This laser is extremly stable... it is rock stable.....It is that well regulated..

This laser is also reverse polarity protected at both inputs. Overvoltage protected at the input as well.

This Unit also includes Analog modulation control input but will work with TTL modulation as well..to well over 30khz  and still have a flat frequency response...very linear , very smooth... Also,  Adjustable focus to match-up your beam to your optics !!!

We will provide hook-up instructions , its very easy to use..A 2 Ft long 2wire shielded cable is included with the head... Great for laser show applications!

One benefit of the higher power RED laser is that the beam can actually be seen. During the night, it's an awesome sight. So cool...It's always fun to see the confused look on peoples faces when they see a several hundred foot long glowing stick of light coming from this module. All photos of the laser in use are 100% real -No Smoke- (except for the lasershow pix) overexposure or editing required. Has not been overdriven ... you know the routine...

Incredible power in a small unit with a stunning and instantly visible bright RED (660nm) beam that this unit produces is instantly recognizable as a special industrial strength professional laser comparable to the power usually associated with laser shows in nightclubs and theatres. Just the perfect size for home lightshow use.

This OEM model is for professional use only. Uses include Laboratory, Clubs, Science Societies, and Observatories; Special Effects in the TV and Movie Industry; as a component in measurement and cutting tools, And other Lab equipment, etc.
Specifically designed for Laser lightshow use.

Legal Notice: All OEM RED Laser Modules are designated solely as OEM components for incorporation into the customer's end products. Therefore, this laser does not and is not required to comply with the requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. The customer is responsible for compliance with FDA requirements.

In other words: this is NOT a toy; the dot is so bright that it should NOT be looked at directly or on reflective surfaces. Please use this laser responsibly.

Do not allow Children or Animals to play with it - They can have the dollar-store Red ones :). We will not be responsible for its use or handling, Do not let your friends play with it...Guard it with your life. This laser is extremely powerful and could potentially damage one's eyes, please use responsibly. You MUST be 18 years of age or older and a reasonably responsible adult.. In other words...DONT do stupid things with this.

***** PLEASE WEAR PROPER SAFETY GOOGLES*****

There is no warranty...other than if DOA then We will replace it. You can check my feedback,,, We don't disappoint! ..Everyone that has one of these are extremely pleased..You will love this laser.

Specs:

Wavelength : 658-663nm RED
Mode : TEM00
Output power (mW) @ 25C : 225mW
Operating Current (mA) : 360ma
Operating Voltage : 7.0 - 10V DC
Focus: Adjustable
Circuit Design : ACC
Operation Mode : CW
Modulation Mode: Analog or TTL > 30khz
Beam Divergence < 1.0 mrad , Typically .7
Beam Diameter < 2.7 mm
Polarization Ratio : > 125:1
Output Power Stability < ± 1.0%

Storage Temperature 10 - 50 Degrees C
Optimum Operating Temperature 20 - 30 Degrees C
Unit measurements 3.06" long x 1.865" wide by 1.15 inches tall.

Unit lifetime is based on the MTTF rating of high power laser diode used from the laser diode manufacturer. Normally 5000 Hrs.

Model: model 660-225 OEM RED Laser
Output Power: 225mW, Power Consumption - 360mA.
Class IIIb Wavelength: 658-663nm

USA and Canada - We ship Priority mail service and is $15.00

International Shipping is via Fed-Ex with tracking $55.00 USD

LEGAL NOTICE:

TERMS AND CONDITIONS:

Your bid is a contract to purchase said goods and shipping at the stated price.

I will not be held liable for damages arising from your use/misuse of the product.

PAYPAL IS THE PREFERRED PAYMENT METHOD. If other arrangements are needed contact me and we will discuss it. 

IF YOU ARE AN INTERNATIONAL BIDDER CONTACT ME TO DISCUSS SHIPPING, HANDLING, AND CUSTOMS.

Bidders with excessive negative feedback will be removed from the bidders list unless you contact me prior to bidding and provide a COMPELLING explanation as to why that many people who think you are a horrid buyer are wrong. 

Contact after the auction ends is expected in a timely fashion (24 hours). Payment is also expected in a timely fashion (72 hours) after auction close unless other arrangements are required. If more time is needed, contact me.

Shipping is "flat rate" and is usually handled by USPS for United States deliveries. We will provide tracking numbers via email as soon as they are available. If you want different shipping arrangements please send a seperate email to get our attention .We usually ship the item in less than 48 hours after payment has cleared.

Due to lost overseas shipments we now have to use Fed-Ex, Its more expensive but this insures delivery.

We tried it the cheap way to save you money but this turned out to be a nightmare.

You have 24 hours to inspect the unit. If you want to return the item for a full refund minus shipping costs, contact me to be issued an Return Authorization number (RA#). All returns MUST have the RA# on the outside of the box when you ship it back to us.I hope you interested and thanks for viewing the auction!

Shipping to USA and Canada is 15.00 USD. International 55.00 USD