Oscillating motion outperforms the conventional orbital motion - no vibration and without any kickback.

A small, yet efficient sander for very tight spots - corners, sides and inaccessible areas!
1. Head of die-cast ZINC provides an exact and stable housing for the moving parts and ensures longevity.
2. The sanding area 2 1/2" x 2 1/2" x 2 1/2" (65 x 65 x 65 mm) with hook & loop pads allows for quick changing of the sanding pads.
The Delta Sander OZI 115/E is supplied in a new, high-quality PP storage case. It has a strong frame, is extremely stable and large enough to repack in the case without "fiddling around". With lateral sticker for identification of the content. Complete with 4 sanding pads (two 80 and each one 150 and 280 grit), one sanding fleece plus each one hard and soft felt polishing pad.

Oscillating motion outperforms the conventional orbital motion - No vibration and without any kickback!

Technical data:
Sanding area 2 1/2" x 2 1/2" x 2 1/2" (65 x 65 x 65 mm)
Max Power 1/8 hp (100 W)
Volts 110 - 120V AC, 60 Hz
Oscillations/minute 3,000 - 10,000
Length 9'' (230 mm)
Weight 1.8 lb (800 g)
This industrial sander with the superb oscillating action means you can sand in the tightest of spots and permits you to do extremely fine and detailed work. The sanding area 2 1/2" x 2 1/2" x 2 1/2" (65 x 65 x 65 mm) with hook & loop pads allows for quick changing and use of all 3 corners. Simply remove and rotate through 120° for a fresh corner. NO 38 520

The oscillating motion ensures quiet operation and allows the use of cutting blades, too! Wherever a circulating saw blade is useless. Ideal for cutting metal, wood, glass fibre reinforced plastic (GRP), plastics, dry wall and many other materials. The variable speed control for speeds between 3,000 and 10,000/min provides the correct speed for every material

Flexible Scraper of spring steel 2" x 2 3/4" (50 x 70 mm): Utilizes the oscillating motion of the OZI, yielding exceptionally high efficiency at 10,000/min. Ideal for the removal of paint, tile adhesive, silicon and even of tar and under-body dirt. Incl. attachment washer. NO 28 904

Sanding Pads: High durability aluminum oxide pads. Surface covered with special filler to prevent clogging. Deposited on special backing paper with adhesive.
NO 28 880 80 grit 5 sheets
NO 28 882 150 grit 5 sheets
NO 28 886 280 grit 5 sheets
Bulk Packs
NO 28 891 80 grit 25 pieces
NO 28 893 150 grit 25 pieces
NO 28 895 280 grit 25 pieces

Polishing Set for OZI 115/E: For polishing and high gloss polishing of metal parts, natural or artificial stones, preparing for and cleaning of coatings, making decorative scratch patterns in wood and aluminum, blending toolmarks, de-burring, etc. Set includes each one felt polishing pad (fine), felt polishing pad (coarse) and 1 non-woven abrasive pad, all size 2 1/2'' x 2 1/2'' x 2 1/2'' (65 x 65 x 65 mm), with easy hook & loop system. NO 28 888

HSS Cutting Blade Ø 2.5'' (65 mm): The HSS cutting blade oscillates and therefore is the solution, where a normal, rotating saw blade cannot be used. The cutting line is always visible, and the segmented shape allows for sawing right up to perpendicular surfaces, i.e. cutting right into corners, without over-cutting. Used for cutting wood (model building and house decor), fiberglass, carbon fiber, drywall, aluminum profiles, etc. Size Ø 2 1/2'' (Ø 65 mm), bore 13/32'' (10 mm), incl. attachment washer. NO 28 900

Diamond Cutting Blade: 2 1/2" diameter (65 mm), bore 13/32'' (10 mm) Cuts marble, bricks, dry wall along with many other materials. The semi-circular shape facilitates cutting right into corners or adjoining surfaces without over cutting. Incl. attachment washer. NO 28 902

Useful new accessories:
Serrated Plunge Blade: For cutting precise holes of any shape, like windows and hatches in airplane and ship models or dollhouses. Will cut wood, plywood, plastics and aluminum. Maximum cutting depth: 9/16'' (16 mm).
NO 28 897 width 5/16'' (8 mm)
NO 28 898 width 5/8'' (16 mm)

Diamond Files: For matting, de-burring and finishing of glass, porcelain and ceramics, as well as steel and hardened steel. Width: 1'' (25 mm), maximum depth 13/16'' (20 mm). The rounded edge enables work on round and recessed spots.
NO 28 906 120 grit
NO 28 907 180 grit

Powered by ProStores