RC airplane Volt Watch 4.8V VOLTAGE MONITOR

Brand New factory Sealed with Warranty 

4.8V - 6V LED Receiver Battery Voltage Monitor

HOBBICO VoltWatch 2 Battery Monitor #HCAP0332

This is the VoltWatch2 on-board Receiver Battery Monitor for
4.8V and 6V NiCd and NiMH receiver packs.
This mounts on the outside of the airplane, so you can see at a glance
the status of the receiver battery mounted inside.

FEATURES: 7-LEDs provide instant, accurate battery voltage status of Low, Safe,
                     or Max. Only one LED glows at a time
                    Small switch to select 4.8V or 6V battery
                    Very lightweight, only .15oz (4.3g) unit can mount on the side
                    of the fuselage, or under the plane's canopy
                    Draws amazingly low current - from 4-34mA depending on the battery
                    voltage
                    Plugs into any open receiver channel using a Futaba J connector
                    One year warranty

INCLUDES: One VoltWatch2 On-Board Receiver Battery Monitor w/Futaba J plug
                     One 1.5"x1" piece of double sided mounting tape

REQUIRES: Plugging into any unused receiver port
                     Mounting onto the airplane with double-sided tape

SPECS:    Length: 1.65" (42mm)
                Width:   .63" (16mm)
                Height:  .16"  (4mm)
                Weight: .15oz (4.3 grams)
                Current Draw: approx 4-34mA
                Lead Length: 198mm (7.79")