General Specifications as Per Brochure
Tunnel Opening:                       10"H x 21"W
 
Production:                           200 Parts/Hour based on 8" centers &
                                        10 second cycle
Conveyor Speed:                       Index for 6 seconds at 6.67 FPM
                                      Dwell for 12 seconds
Operating Temperatures:
   Wash Stage:                        100 - 140 degrees
   Rinse Stage:                       100 - 140 degrees
   Blow-Off Stage:                    100 - 180 degrees
Construction:
   Tank:                              #10 GA. 304 S.S.
   Housing:                           #10 GA. 304 S.S.
   Ductwork:                          #14 GA. 304 S.S.
   Interior Piping:                   304 S.S. Sch. 40
   Exterior Piping:                   304 S.S. Sch. 10
   Belt Size:                         8"
Water Connection:                     1" Thr'd Sch. 40 Gal. V., Qty 2
Drain Connections:                    3" dia 150# Flanged, Qty 2
Compressed Air Connection:            1/2" Thr'd Sch. 40
Electrical Connection:                460V, 3PH, 60HZ
O'Flow Connection:                    1 1/2" Sch. 40 Thr'd, Qty 2
Exhaust Connection:                   15" dia. Flanged (Furnished)
Dimensions (Approx.):                 17' x 8' x 8'
Equipped with (must be verified by buyer):
   1" thick bead board insulation w/14 ga. m.s. jacket
   (1) manual lube block for all lubrication points
   85 DBA Max. when checked w/an ambient of 70 dba
   Equipment std. relay logic, (1) E-stop at each end
   Internal part flush in wash & rinse stages
   Fixtured part w/shot pins at unload
   Chip baskets in wash stage
   Energy conservation
   Dirty filter alarm - flashing light
   10 MG per part on 30 Micron filter pad
   High capacity spray system with adjustable nozzle arrangement
   Electric High Volume recirculated air blow-off system
   5 Horsepower Baldor Motor
   Quick disconnect stainless steel v-jet nozzles
   16" diameter cleanout door
   Allen-Bradley Micro-Logix 1500 PLC
   304 stainless steel housing and tank
   Internal "false roof" exhaust system
 
Originally used on Crossover - Engine Cooling Parts