| | |
|
Bidding has ended on this item. Item:Realtime GPS/GSM/GPRS Tracking System Tracker Device US |
|
|
GPS/GPRS/GSM Tracker Mini Tracking Location Vehicle 50g pictures:
Track exactly, track secretly. This GPS tracker can be used to determine the precise location of a vehicle, person, or other asset to which it is attached and to record the position of the asset at certain intervals. This is an advanced GPS satellite positioning system tracker with precise tracking of an object anywhere in the world, works on all available GSM/GPRS mobile networks 850/900/1800/1900MHZ.It can reponse latitude and longitude information to your mobile phone by SMS. Get it today to prevent your car, children and asset from getting stolen or lost,etc... Easy to use. Insert a SIM card with valid phone number to the GPS tracker just like what you do with your mobile phone, then attach it to a secret position of your car(example, under your seat). When you want to check the location of your car, just send a SMS to the number. The GPS tracker will then response a message with its latitude and longitude information. Input this information to Google Earth or other related software and you will be able to identify the position of your car. Specification Dim: 64mm x 46mm x 17mm (1.8''*2.5''*0.65'') Band: 900/1800/1900Mhz; Network: GSM/GPRS; GPS Chip: SIRF3 Chip; GPS Sensitivity: -159dBm; GPS accuracy: 5m; Weight: 50g; Time to First Fix: Cold status 45s, Warm status 35s,Hot status 1s; Wall Charger: 110-220V input, 5V output; Battery: Chargeable Changeable 3.7V, 1200mAh Li-ion battery; standby: 72 hours; 5.1 SIM Card installation
Make sure that there is no call transfer and call display is on, and PIN code off. The SMS message must in Text format, canât be identified for PDU format. Steps: 1 Open the rear cover, and pick out the battery. 2 Push the foil along and turn it left. 3 Put the SIM card into the holder, and turn the foil right and fasten it in
5.2 Battery and Charger
Do charge the battery to capacity in 8 -12 hours for first use. Please use the battery and charger provided by the manufacturer. This unit adopts built-in Li-ion battery, and full battery will support around 48 hours use on end. After first use, the battery can be charged fully in 3-5hours.
5.3 Startup l Put the SIM card and battery in place. l Turn on the unit outdoors by pressing the âon/offâ button until the indicator is on. l For first use, please initialize the unit and restore it to default setting.( please refer to 5.4 for instruction.) l In 10 or 40seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals. The indicator will keep flashing every 4 seconds when the unit has received the signals, otherwise it will keep on. l When this unit receives GPS signals normally, you can use it and do all the following settings. 5.4 Initialization Send âbegin+passwordâ in SMS to the unit, it will reply âbegin okâ and initialize all the settings. (default password: 123456) 5.5 Change the password Send SMS password+old password+space+new password to change the password. Remark: 5.5.1 Be sure keep the new password in mind. 5.5.2 Make sure the new password is in 6 digits, or else the tracker can not recognize the password. 5.6 Authorization There are only 5 numbers able to be authorized. 5.6.1 Call the tracker for 10 times, it will make the cell phone number as the authorized number automatically. 5.6.2 Send SMS admin+password+space+cell phone number to set up a authorized number. The other authorized numbers should be set by the first authorized number. If the number is successfully authorized, the unit will reply âadmin ok!â in SMS. 5.6.3 Send SMS noadmin+password+space+authorized number to delete the authorized number. 5.6.4 For roaming purpose, you have to add your country code ahead of the cell phone number, for example, please send admin123456 008613322221111 to tracker to set 13322221111 as an authorized number. 5.7 Real-time polling 5.7.1 If there is no authorized number, when any number dials up the unit, it will report a Geo-info; If there is already an authorized number, then it will not respond when an unauthorized number calls it up. 5.7.2 When an authorized number dials up the unit, it will hang up and report a real-time Geo-info; 5.8 Auto Track Report a Geo-info at 30s intervals to the authorized numbers for 5 times: 5.8.1 Set up: Send SMS t030s005n+password to the unit, it will report the Geo-info at 30s intervals for 5 times.(s: second, m: minute, h: hour). The setting must be in 3 digits and at maximum 255 in value. 5.8.2 Send SMS t030s***n+password to the unit, it will reply SMS heaps of times 5.8.3 Cancel: Send notn+password to delete the â auto track â Remark: the interval must not be less than 20s. 5.9 Voice Surveillance In this mode, the user can dial up the unit to monitor the voice (please refer to 5.10 for instruction). 5.10 Modes switch between âtrackâ and âmonitorâ 5.10.1. The default mode is âtrackâ. 5.10.2. Send SMS monitor+password to the unit, and it will reply âmonitor ok!â and switch to âmonitorâmode. 5.10.3. Send SMS tracker+password to the unit, it will reply âtracker ok!â and restore to âtrackâ mode. 5.11 Geo-fence Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to the authorized numbers when it breaches the district. 5.11.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can Send SMS stockade+password+space+latitude,longitude; latitude,longitude to unit to set the restricted district. In case of breach, it will send SMS âstockade!+geo-infoâ to the authorized numbers. Remark : The first latitude&longitude is coordinate of the top left corner of the Geo-fence, while the second latitude&longitude is the coordinate of the bottom right corner. It will alarm one time in each setting. 5.11.2 Cancel: Send SMS nostockade+password to deactivate this function. This function will be out of effect after the unit moves outside the district. 5.12 Movement alert 5.12.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can send SMS move+password to the unit, then the unit will reply âmove ok!â. In case of such a movement, it will send SMS âMoveâ along with a Geo-info to the authorized numbers. It will alarm one time in each setting. 5.12.2 Cancel: Send SMS nomove+password to deactivate the movement alert. Remark: This function will be out of effect after the unit moves outside the district. 5.13 Overspeed alert: 5.13.1 Set up: Send SMS speed+password+space+080 to the unit (suppose the speed is 80km/h), and it will reply âspeed ok!â. When the target moves exceeding 80 km/h, the unit will send SMS speed+080!+Geo-info to the authorized numbers. It will alarm one time in each setting. 5.13.2 Cancel: Send SMS nospeed+password to deactivate the overspeed alert Remark: It is recommended that the speed alarm is set at not less than 50km/h. For below that rate, it may cause the excursion of the GPS signal influenced by clounds etc. Package Content: 1 X GPS Tracker
2 X Batteries 1 X Wall Charger 1 X GPS Tracker Manual
Shipping: The item not ship to : Italy,Thanks for your bid. We will NOT be responsible for any delay during delivery including but not limited to customs postage checking, strike, force majeure etc
Terms:
About us:
|
Shipping and handling Item location: Hong Kong, Hong Kong Shipping to: Worldwide
 
*The estimated delivery time is based on the seller's handling time, the shipping service selected, and when the seller receives cleared payment. Sellers are not responsible for shipping service transit times. Transit times may vary, particularly during peak periods. | ||||||||||||
Return policy
| |
Payment details
| ||||||