Russound CA6.4 6 Zone - 4 Source Central Controller/Amp

Russound's CA6.4 is an easy-to-install and operate integrated distribution amplifier capable of playing up to four different sources independently to as many as six rooms. Each zone amplifier is controlled from a simple and elegant keypad and can select and operate one of four source components. The in-wall keypad's four green LEDs provide visual confirmation of the selected source. A red LED confirms an IR command from the hand-held remote. Using a source remote, the built-in IR sensor allows total control of most products. Each keypad can control the source input, room volume, on /off, and receive IR source commands. Another feature to gain further flexibility is adding the CA LRN. This optional piece stores IR commands and provides remote activation of virtually any IR-controlled device connected to the system. Simple-to-connect, and with no additional wiring, the CA LRN easily adds convenience to a new or existing system. Simple programming stores most equipment source IR commands in the CA LRN's control layers. Up to 48 different IR commands can be easily programmed into its 4 control layers, and the CA LRN can execute those commands and operate as many as 4 source components via its 12 command keys.

The CA6.4 is as simple to install as it is to operate. The keypads connect using an eight conductor wire called CAT 5 cable. Source components connect using standard RCA interconnects. There are four inputs for your audio components. The IR emitter outputs allow the built-in IR receiver to repeat the commands to your source components.

Features:

• 6 individual stereo preamplifiers / amplifiers operating 6 rooms (zones) independently
• 4 audio source inputs for connecting your CD, TAPE, TUNER, AUX or use provided labels to choose customize music genres and equipment choices
• simple operation from an easy to use keypad controller
• operate your equipment from any keypad using your source remote
• visual conformation of the IR signal on the keypad
• zone on / off indicators on the front panel
• 12 channels of High Current amplification @ 20 Watts RMS / channel, 8 ohms
• expansion to 12 zones (2 CA6.4's) via IR link

Technical Information:

• Frequency Response: 20 Hz to 20 KHz (+/- 1dB)
• 20 Watts RMS / Channel @ 8 Ohms
• Total Harmanic Distortion: .1%
• Signal to Noise Ratio: 89 dB min, "A" weighted
• Power Supply: 110/220v with High Current Toroidal
• ETL Listed (UL/CSA) (see pg 31 for details)
• Fully Functional Keypad with IR Receiver Centered at 40 KHz
• Unit Weight: 15lbs (6.8kg)
• Keypad Weight: 1lbs (.5kg)
• Unit Dimensions: 17"W x 9 3/8"D x 3 1/8"H (43 x 24 x 8cm)
• Keypad Dimensions: 1 15/16"W x 2 5/8"D x 2 5/8"H (3.3 x 6.7 x 6.7cm)