SENTINEL HPH-4 HIGH POWER HID CONTROLLER FREE SHIPPING

When trying to control more than one HID (High Intensity Discharge) lighting system, you can either use a bunch of timers OR… a device like the HPH-4. The HPH-4 makes it simple to control up to 4000 watts of lighting from a single timer or controller. The HPH-4 has four UNIVERSAL receptacles that accept either a 120 volt (Nema 5-15P) or 240 volt (Nema 6-15P) male plug from your HID ballasts.

The user provides a single 240 volt, 30-amp circuit to the HPH-4. An internal heavy-duty relay turns the lights On and Off. The relay is turned On and Off by connecting the 15 ft “trigger cable”, (a 120 volt power cable) to a time-clock or controller like the MDT-1. When the time-clock or controller turns ON, the trigger cable caries the voltage to the relay inside the HPH-4, the relay activates, and the (4) receptacles are energized turning the lights connected to the unit ON. 30-amp @ 240-volt main power supply. (3-wire #10 AWG 120-volt trigger cable connects to MDT-1 controller or time-clock

HPH-4 is housed in a heat-sink aluminum enclosure that is designed to remove the heat and allow cooler operation. Universal receptacles accept either 120 or 240 volt ballast cables. We use only heavy duty 40-amp industrial contactors for the HPH-4