SGP STEINHEIL Anti-Fingerprint for LG Versa VX9600

* steinheil Anti - Fingerprint Hard Coated Film that prevents fingerprint stein on LCD
* This Product contains 2 Films in a Package
* DOES NOT include the Phone

Overview 1. High grade anti-fingerprint hard coated optical film (MADE IN JAPAN) 2. Good Light transmittance 3. High grade anti-glare hard coated film     Steinheil AF is a high grade Anti-Finerprint stain film. It is a protective optical enhancement film based on product made in Japan.   Steinheil has a premium hard - coated surface that has no rainbow marks on the coated surface. Steinheil AF is a high grade protective optical film. Good light trasmittance film. Steinheil has a good surface hardness : 3H ~ 4H and No interference with touch - screen responsiveness. Steinheil has a premium silicon adhesive - bubble free application. Steinheil is an Anti - UV Rays coating film.     Instructions for Steinheil (screen part) *It is important that clean both hands before the procedure *Film may be useless, if some dust or fingerprint gets on adhesive side of film *You might see thin white lines on the adhesive side. In this case, it is not scratch or dust and it will disappear after 24 hour of attachment. Clean both hands and adjust the location where the film would be on the LCD. Since we make our film little bit smaller than actual LCD size, it is important to arrange the film get to center of LCD before you take off all vinyl out of the hard film. Clean the LCD with cleaner and cloth included. If there is a dust left on the LCD, that can be annoying afterward. Apply cleaner on the cloth, Not on LCD. Steinheil is covered both sides with vinyl to protect the film. Take of 1/3 of back vinyl and begin to apply it on the area you desired of LCD. Take of the rest of back vinyl as you fully attach the film. Do not take off the vinyl on the front to keep the front surface as clean as possible. Make the film settle on the LCD using the squeegee included. If there is an air bubble, slightly lift up the area that has bubble and adhere again. Or push the bubble out to the sides with the squeegee. *In Case of Dust Left Underneath Afterward *If you see any dust after all works are done, lift up a corner with a tape and remove dust.