Salinity Refractometer + digital pH Meter Aquarium

The set includes Salinity Refractometer (RHS-10ATC) and digital pH Meter (PH-025) with FREE calibration screw driver, and lots of pipettes to give you high quality devices and best results. Below are detailed information that you need to know about each item.

1) Salinity Refractometer (RHS-10ATC):

Salinity Refractometer is designed for testing the concentration of salt water and brine and used for quality control in research and clinical laboratories and marine industry. Its scale enables the direct determination of salinity in water that contains dissolved salt and little or no other dissolved solids. It is suitable for a marine saltwater tank.

FULLY EQUIPPED with ATC (it has a small bi-metal strip that moves a lens or prism in response to the temperature change) to correct temperature discrepancies during use. And it has the multi-function capabilities of measuring with high accuracy and preciseness, vivid and sharp reticle chart for easy and comfortable reading of results yet durable and last long. Because refractive index is very temperature dependent, it is important to use a refractometer with automatic temperature compensation (ATC) to give you the most accurate measurement in any type of environment temperature. Comes with its own mini-screw driver for calibration, comprehensive operations manual, protective carrying case and pipettes for user's convenience. Made by experienced craftsmen, it never needs to be recalibrated and are unlikely to break down!

Features:

• Equipped with a scale measurement that provides direct reading
• Determines the amount of dissolved salt and dissolved solids
• Approved by strict quality and safety standards
• Durable and built to last long
• Heavy-duty and lightweight with its aluminum construction
• Easy to focus and calibrate
• Accurate testing results guaranteed
• Made with the highest and finest quality of aluminum & rubber that makes it lightweight
• Cushioned with soft & comfortable non-slip rubber
• Extremely easy-to-use and calibrate
  

Specifications:

• Measuring Ranges: 0-100 ppt of NaCl and 1.000 to 1.070 Specific Gravity
• Divisions: 1 ppt / 0.001 Specific Gravity
• Accuracy:  ±1 ppt / 0.001 Specific Gravity
• Length : 205 mm
• Weight: 220 g

Accessories included:

• Pipette + 10pcs pipettes more for free
• Operations manual
• Mini-screw driver
• Soft protective carrying case
  

Warranty: 2 years warranty (24 months)

The Product

back to top         

2) Digital pH Meter (PH-025):

The NEW DIGITAL PH METER is a less expensive, slick and stylish handy meter that comes with a large and easy to read display system. A 1m cable from meter to sensor and an easy operation-switch-button are provided for easy installation and usage. A mini-screw driver (trimmer) is supplied for easy calibration of the pH Meter and comes with four (4) 1.5V batteries for less hanging wires in you aquarium area and mobility.

You can rely on with its 100% accurate and stable reading. Use PH-025 to monitor the pH level of any type of water digitally.

The Digital pH Meter is not just for aquarium it can also be used in swimming pool, spa, laboratories and hospitals. Determining pH level has never been this easy!

Save more with our Digital PH Meter! It's durable and built to last long, measures with accuracy and preciseness and very reliable indeed!

Features:

• Comes with free 2 bottles of Calibration Solutions (4.003 & 6.864)
• Have reliable, stable and fast reading with 1 metre cable from meter to sensor
• Easy operation with its switch button
• User-friendly and easy to install with its step-by-step operating information
• Has a 4-digital LCD for ease of reading
• Four (4) 1.5V batteries are provided for a clean and wireless environment
• A mini-screw driver is also provided to fine-tune the reading to standard calibration

 

Specifications:

• Measuring Range:  0.00~14.00pH
• Resolution:  0.01pH
• Accuracy:  ±0.1pH (at 20°C or 68°F)
• Environment Temperature:  0 - 50°C (32 -122°F)
• Dimensions:  60mm x 55mm x 23mm
• Calibration:  Manual, miniscrew driver provided
• Weight:  75g
• Power Supply:  4 X 1.5 V (AG13 Button Battery)

 

Accessories included:

• 1 bottle of 4.003 Buffer (calibration) solution + 1 bottle 6.468 Buffer (calibration) solution
• 4 x 1.5V AG13 Button Battery
• Operations manual
• Miniscrew driver
  

Packaging: White gift box

Warranty: 2 year warranty (24 months)

Operating Information:

• Remove the protective cap.
• Rinse first the electrode with the distilled water, and wipe it carefully with filter-paper.
• Check the battery arrangement at the battery compartment located at the back of the meter. Make sure that the battery matches the correct polarity.
• Press the ON/OFF switch to turn on the meter.
• Immerse the sensor electrode in the solution to be tested and wait for the reading to stablilize.
• Clean and dry the sensor electrode before placing in the storage.

back to top