68 ROLLS OF SILICONE TAPE IN LARGE ADJUSTABLE TRAY
DESIGNED FOR TO HOLD AND DISPLAY THIS PRODUCT FOR RESALE
Special lower prices on this kit. Tray itself is $15.00 wholesale.
Comes in colors shown. If there is some color you do not want and want to substitute with a larger quantity of some of the other colors; just communicate your requirement at time of payment on your order, or paypal payment. Kit comes with 10 rolls of black and red and 8 rolls of the other 6 colors.
Please note white tape is Rigging tape which has a rectangular cross section vs regular silicone tape which has a triangular cross section.
COLORS AVAILABLE RED, BLACK, BLUE, YELLOW, GREEN AND WHITE
NOW HAVE CLEAR/ NEUTRAL AND GRAY
TAPE IS 1" WIDE BY 1O FT IN LENGTH.. See complete specifications below.
| Operating |
Continuous |
-54°C to +260°C (-65°F to +500°F) |
| Temperature Range |
Intermittent |
-65°C to +260°C (-85°F to +500°F) |
Dielectric Strength Minimum Short Time (1/4" Electrodes)
|
ASTM D-149
|
0.010"-0.030" 400 VPM 0.040" 300 VPM 0.050" 275 VPM 0.060" 250 VPM 0.070"-0.080" 200 VPM |
Dielectric Constant, 1 KHZ |
|
2.95 |
Dissipation Factor, 1 KHZ |
|
<.0004 |
| Volume Resistivity |
ASTM D-1458 |
3 x 1014 OHM/CM |
| Cold Brittle Point, Max. |
ASTM D-2137 |
-65°C |
| Water Absorption |
FED. STD. 601, Method 6251 |
3% Max. by Weight |
| Tensile Strength |
ASTM D-412 |
700 PSI Minimum |
| Ultimate Elongation |
ASTM D-412 |
300% Minimum |
Aging Property Retention (100 Hrs @ 500°F) Tensile Elongation |
ASTM D-412
|
75% 50% |
| Tear Resistance |
|
85 PSI |
Durometer Hardness
|
|
50 Shore Durometer (Room Cured 24 hrs.) |
Tolerances Thickness Width |
|
+/-.002" +/-.0625 |