Slave Flash Trigger / Radio 4 Channel

This auction includes:

• One radio transmitter;
• One radio receiver/trigger;
• One 1/8" PC sync plug adapter;
• One 12" PC sync cord.



1. The transmitter sits on camera's hot shoe and sends encoded (16-bit digitally encoded) radio signal* to trigger a remote flash, a studio strobe or a flash power pack up to 3000 W/S to which the receiver is attached. The transmitter contains a tiny user-installable 12V alkaline photo battery (included) and has a function of sleeping mode when standby (getting rid of on/off switch). So it has super low power consumption and can trigger some 20,000 times continuously with one battery.

   Low triggering voltage ( less than 6V with 0.01mA ) which is extremely safe to modern electronic cameras.

   The receiver receives and decodes the signal sent by the transmitter and triggers the flash/strobe/power pack it is attached to at a sync speed up to 1/1000 sec. The receiver uses two AA alkaline batterires.

   Effective range: 100 feet/30m approx.

   The receiver has a standard 1/4" phone jack plug for attachment to many monolights and other studio flashes that use this type of connection. It also comes with one 1/8" (3mm) PC sync plug adapter which is designed for use with studio flash/strobe that use this type of connection.

   If you want to use the receiver to trigger a hot shoe portable flash instead of a studio strobe, you will need an adapter. Please ask seller about hot shoe adapters.
   

   Just slide your hot shoe flash on the top of the adapter and insert the receiver's 1/8" plug into the sync socket on the side of the adapter. The adapter can fit on a tripod or light stand that has 1/4" screw stub. No PC sync cord is needed.

   ___________________________________

   For strobe that has a household H-prong PC sync receptacle, an H -prong adapter is needed**.

   _________________________________

   The transmitter has a TEST button so you can trigger your remote flash manually for metering purpose.

   The item also comes with a PC sync cord for cameras that do not have a hot shoe. Measurement: Transmitter - 2 1/2"H x 2"W x 1"D, Weight: 1.3 oz (with battery) / Receiver - 3"H x 1 1/2"W x 1"D, Weight: 1.2 oz (without 2 AA batteries).

   _____________________________________

   *The digitally encoded radio signal is extremely reliable, unlike the common analog radio signal which is apt to radio interference such as cellular phones, pagers and cordless microphones which are often the case in a wedding party.

   The encoded radio signal assures interference-free reception. It works indoors and outdoors, around corners and through walls, just like when you are using a cellular phone: you dial the number and the other party's cellular phone receives your call. With this transmitter mounted on your camera, when you release the shutter, the signal is sent and the receiver receives/decodes the signal and triggers your remote flash/strobe/power pack, even if they are in the next room.

You can use several receivers to work with one transmitter and vice versa since the radio signal is factory-coded to be working on same frequency for same model.

This item carries six month store warranty.

Buyer has 14 days examination period for a full refund minus $5 seller re-stocking fee starting from the date of the item being delivered. No refund is permitted beyond the 14-day examination period. Free replacement of same item up to 6 months starting from the date of the item being delivered. Buyer is responsible for all return shipping cost without exception.  Please accept the above terms before you bid.