A reserve price is the minimum price the seller will accept. This price is hidden from bidders. To win, a bidder must have the highest bid and have met or exceeded the reserve price.
Install near the breaker box to provide the most efficient coupling
Tuned for INSTEON signals - blocks other frequencies, like electrical noise
Simple two-wire design for superior performance
DESCRIPTION
Are lights or appliances in one area of your house having trouble receiving signals from INSTEON or X10 transmitters in another area of the house? This common problem is easily correctable with Smarthome's Hardwired INSTEON SignaLinc Phase Coupler (also called a signal bridge).
What's Included SignaLinc V2 Passive Coupler Wire nuts Owner's manual
Because most homes have 2-phase 220V power that splits into two separate 110V legs, sometimes automation commands have a hard time making the transition from one leg to the other. But connect the Hardwired INSTEON SignaLinc Phase Coupler to your home's breaker box, and it will bridge INSTEON and X10 signals between the two power lines in your home easily, allowing virtually all of your automation receivers to respond to X10 and INSTEON signals.
How do I Know I Need a SignaLinc? Here is an easy test you can perform to see if your home would benefit from a SignaLinc. Find the X10- or INSTEON-compatible transmitter and receiver that never seem to work together and try sending a signal between the two right now (still not working, right?). Then, turn on a 220-volt appliance, like your electric oven, clothes dryer, or central air conditioning. It has to be an all-electric appliance; turning on a gas dryer won't work. Now, go back to the transmitter and re-send the signal to that problematic module. If it now works, then you've proven that a SignaLinc will help the X10 and INSTEON signals in your home. In this test, the 220-volt appliance acted like a phase coupler.
New Design, Only Two Wires to Connect Unlike many other hardwired solutions that require a neutral connection, the Hardwired INSTEON SignaLinc Phase Coupler offers easy two-wire connection (plus the ground wire). That makes it ideal for older homes that may have a limited number of openings on the neutral bus bar. Additionally, the two-wire design allowed our engineers to improve the coupling between phases over traditional signal bridges.
Can I Install it Myself? In most cases, yes. If you've ever replaced a broken circuit breaker, then you have the experience to install a phase coupler. You will need two dedicated 15-amp circuit breakers (available at a home improvement center). If you have more than one electrical panel, the SignaLinc should be installed at the panel closest to the point where electricity enters the building. If you choose to have an electrician install it, it should be no more than an hour's job to mount and wire it.
Note: The Hardwired INSTEON SignaLinc Phase Coupler is a passive coupler and does not amplify the signal. This means the signal coupled onto the receiving phase will be no stronger than the original signal on the transmitting phase. How well the SignaLinc works in your home is dependent on many factors, including signal strength for the transmission phase.
The Hardwired INSTEON SignaLinc Phase Coupler has been tested, investigated and found to comply with the requirements of the Standard(s) for Information Technology Equipment (UL-1950) and are identified with the ETL Listed Mark. The product with this mark on it has been certified by Intertek Testing Services (ITS). This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. product safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued conformance.
Safety Tested and Factory Certification All SignaLinc products are safety approved. The assembly line for SmartLabs Design Products is ISO9001 certified. In order to meet the ISO 9001 standards, the entire factory underwent rigorous inspections of procedures and policies before being thoroughly audited. The certification received was based on its dedication to high quality management systems and strict adherence of quality systems and guidelines.
Specifications
Brand:
Smarthome
Manufacturer:
SmartLabs Design
Manufacturer Product No.:
2406H
UPC:
891114000112
Dimensions:
4 1/8" x 1 5/8" x 1 3/8"
Power Rating:
240V AC, 60 Hz, 1W
Warranty:
2 years, limited
Mechanical
Mounting:
Mounts in single or mulitple-ganged junction box
Operating Conditions:
Indoors, 32 to 122°F, up to 85% relative humidity
Electrical
Power Rating:
240V AC, 60 Hz, 1W
Power Wire Leads:
2 10gauge wires
Ground Lead:
6", 18 AWG, stranded, bare copper
Certification:
Safety tested for use in USA and Canada (ETL #3017581)
WARRANTY
Since this item is brand new, the manufacturer's warranty is in effect.
RETURN POLICY
Within 30 days of shipment, Smarthome will replace any defective items - no refunds will be given.
Shipping is a flat rate $6.99 via Ground shipment. Extras of this item can be added for an additional shipping charge of $1.50 per item.
This item CAN NOT BE picked up.
Product usually ships within three (3) business days of payment (Saturday & Sunday excluded). Absolutely no international orders. PO Box orders will be shipped via USPS.
Payment is expected within seven (7) days of auction close/"Buy It Now" date. Payment = shipping + final auction amount (or Buy It Now price) + Sales Tax (if applicable).
California residents must pay 8.25% sales tax.
WHY ARE SOME OF THE CHARGES & POLICIES DIFFERENT ON EBAY VS. YOUR REGULAR SITE?
The answer is "because we have to process the orders differently". We wish we could replicate all of our systems and processes onto eBay, however that is not the case, so not only have we had to limit our offering in terms of products (we have over 5,000 on our website), but we've also had to limit our payment options, shipping options, etc. We do understand that people enjoy shopping on eBay which is why we do offer some products on eBay, however we have to have a separate set of terms for eBay purchases, and by buying this item on eBay, you agree to our eBay terms and conditions. If you would like more skus, more payment options, more shipping options, etc. feel free to shop on our website.
Payment
I accept the following forms of payment:
PayPal
Preferred Checkout For fastest processing of this order, please use Vendio Checkout!
*The estimated delivery time is based on the seller's handling time, the shipping service selected, and when the seller receives cleared payment. Sellers are not responsible for shipping service transit times. Transit times may vary, particularly during peak periods.
Paypal payments should be made to ebaysales@smarthome.com. No other forms of payment are accepted. CA residents please pay 8.25% sales tax. Payment = final price + shipping (plus sales tax if applicable). Thank you! For customer service, please email eBaysales@smarthome.com or contact 1-800-762-7846.
Seller assumes all responsibility for this listing.
Back to Search Results
) 
Smarthome Factory Store
Print
Report item
For fastest processing of your order, please use Vendio Checkout!
and your