PROBABLY THE BEST DELAY PEDAL IN THE WORLD!
Guitar Player Magazine gave it the editors Pick-Award.
Whenever the Replica is tested, it always gets top rates.
A lot of famous players are using this pedal. Just have a look
far right under "Who plays T-Rex". You will see Carlos Santana,
Gary Moore, John Mayer, Greg Lake, Sonny Landreth etc.
Just leave
it on, most players say
It is hard to believe, that this delay pedal is
digital. It gives the warmth of all-tube echo and also cool
digital delay in studio quality. All with the convenience of one
pedal.
TIME, REPEAT, MIX and LEVEL knobs allow for quick, precise
control. A Hi-cut button cuts high frequencies on repeats -
perfectly simulating the tone of a 60s era tape echo.
With a simple flick of a switch you can alter the delay?s
subdivision parameter from 1/4 to 1/8 triplets, and to make the
delay fit your purpose we even added a Tap-Tempo switch to get
you right in time with your tune.
Play it and youll buy it!
Sound files
All soundfiles are recorded in
Sun Studio (Copenhagen) by Mika Vandborg, solo artist and
guitarplayer in "Gnags" and "Dicte".
Mika plays a Fender Stratocaster 1964 and a T-Rex T25 BigTone
Combo.
>>
Click this link to see more of Mika Vandborg
Lead.
Delay 2 o´clock, repeats 9 o´clock, tempo 9 o´clock.
>>
Replica off
>>
Replica on
Slap back delay.
Delay 11 o´clock, repeats 10 o´clock, tempo 1 o´clock.
>>
Replica off
>>
Replica on
Long delay accords.
Delay 12 o´clock, repeats 10 o´clock, tempo 3 o´clock.
>>
Replica off
>>
Replica on
Features
The DIRECT plug on the top side is an output
plug. The "dry" signal is send directly through the pedal to the
DIRECT plug without disturbance. You can use this plug to:
- send the signal to a tuner
- send the signal to an extra amplifier and get a stereo like
sound, when playing two amplifiers
- make a retro sound. You send the delayed signal using the
OUTPUT plug to a stereo simulator, that sends the stereo signal
to two amplifiers. You connect a third amplifier using the
DIRECT plug. Retro sound!
The ECHO knob determines the amount of processed signal in the
signal mix.
- In minimum position only the direct signal is heard
- In maximum position only the delay (processed signal) is heard
The LEVEL knob sets the overall volume.
At maximum level, the signal is boosted approx. 3dB.
The REPEAT knob controls the number of repetitions of the delay
signal.
- In minimum position the delay signal is only repeated once
- In maximum position the delay signal is repeated to almost
infinity
The TEMPO knob sets the delay time.
- Minimum delay time is approx. 12 milliseconds
- Maximum delay time is approx. 1500 milliseconds
The LED indicator below the TEMPO inscription indicates the
delay time.
When the TEMPO 'knob is turned while playing, the delay signal
is muted.
The TAP TEMPO -footswitch enables you to tap the delay time
while playing.
The SUBDIVISION button generates quarternote triplets of the
tapped or dialled-in tempo. First you hit the button, then you
tap the tempo/beat using the TAP TEMPO switch. It is recommended
to use a drum machine or similar to hold the beat while using
the SUBDIVISION function.
The BROWN button is a High-Cut filter that alters the tone of
the repeats. The result is a warmer, smoother delay sound
reminiscent of the tone of a 60?s era tape echo.
The MIDI socket allows you to control the tempo externally. (CTL.
No. 20)
Controls:
ECHO, LEVEL, REPEAT and TEMPO.
Modes:
SUBDIVISION and BROWN
External control:
MIDI IN (CTL. No. 20)
Connections:
INPUT-Jack 6,3 mm.
OUTPUT-Jack 6,3 mm.
DIRECT OUTPUT-Jack 6,3 mm.
Power supply (comes with the pedal):
100, 115 or 230V AC/50-60Hz, depending on your country standard.
It provides 12 volt AC and 300 mA. If you want to use another
power supply, you must accept these figures.
However the pedal does work with a 12 volt DC power supply, but
it consumes at least 300 mA. Some DC power supplies cant deliver
the sufficient power - at peaks. So you should go higher, to
probably 500 mA.
Usually you can hear if the power is not sufficient.
Effect usage:
5 watts |