Serious about
racing? More holding power for modified
vehicles? This is what you need!
eCLUTCHMASTER STAGE II Racing Clutch
Kit® is a brand new heavy duty
racing pressure plate with 6 puck spurng
racing disc setup can hold up to 380-450
HP and 60% more pressure
increase over stock.
The eCM® Stage II racing clutch system uses eCM® Stage II Heavy duty pressure
plate with 6 puck sprung ceramic disc.This is ultimate extreme-duy street
or road / drag racing system. It is built using a special 6-wing ceramic button
design disc for long life, outstanding holding capacity and high heat dissipation.
All eCLUTCHMASTER Racing pressure plates
are made from ductile iron (2400 LBS CLAMPING
LOAD) which is about 60-70% stronger than
conventional cast iron pressure plates other
racing clutch manufactures use.
It is recommended for use with 'modified'
vehicles used for "street and strip".
This unit has also proven itself to be very
capable for four wheel drive and off-road
use, also heavy duty towing and commercial
applications.
It offers 120%
more holding capacity than a stock 'OEM'
clutch while maintaining
a stock pedal feel.
About eCLUTCHMASTER 6 Puck Sprung
Racing Disc®-
If you want the best the industry has to
offer -- Ask for eCLUTCHMASTER 6 Puck Sprung
Racing Disc.
The eCM Racing 6 puck strip disc also uses
our high torque internal assembly, but goes
one step further in terms of friction. This
disc uses an advanced hybrid iron and carbon
combination delivering aggressive bite and
increased thermal capacity. Uncharacteristic
of the typical aggressive racing disc, eCM
Racing 6 puck strip disc provides outstanding
stability, smooth engagement, and less wear
on opposing plates.
This combination has proven to be premier
unit with regards to both performance and
driveablitity for the daily driver with
serious torque holding requirement.
This system is recommended as the finest
quality 'upgrade' from the original equipment
clutch.
This kit comes with everything you need
for a new clutch job or clutch upgrade.
Lastly, resurface and rebalance the flywheel
prior to installation for best performance
and result!
Features of eCLUTCHMASTER STAGE
II RACING CLUTCH SYSTEM:
- Heavy Duty Stage II racing pressure
plate
- Hi-Leverage Design
- Preceision heat treated single
diaphragm
- Re-Arched Diahragm for Superior
Engagement
- High clamping force
- NO unnessaary increase in pedal
pressure
- 6-Wings Ceramic Button Disc
- Sprung hub for daily driving
- Decal
**The throwout bearing and pilot
bearing (if required) included ($80 value)
for free!
Street or Long life of clutch BREAK-IN
required.
|
Track up to 10 items on this computer in 
)
SEARCH 
