| Material Handling Equipment: Box Dumpers, Yard Ramps, Dock Lifts, Docks Seals and Shelters, Dock Levelers, Forklift Ramps, Gantry Cranes, Jib Cranes, Lift Tables!
|
|
|
|
TRUCK SCISSOR DOCK LIFT, 48" x 96", WL-100-5-48 |
(Click to Enlarge) |
(see more models below)
| Model | Platform Size (WxL) | Lowered Height | Raised Height | Capacity (lbs) | Overall Frame Size (WxL) | Net Weight (lbs) | | WL-100-5-48 | 48"x96" | 8" | 68" | 5,000 | 41"x93" | 3125 |
Save time and reduce man-hours where there are no docks. Pit or surface mount with the optional approach ramp. Engineered and designed for maximum safety and efficiency. Checkered plate deck is made of heavy gauge steel for years of use. Hydraulic cylinders feature emergency velocity fuse if line breaks.
Complete with upper travel limit switch and overload relief valve. Push-button control is 24V AC on a 20 foot long coil cord. Pre-wired control box includes magnetic starter and overload fuse. High visibility removable handrails with fixed toe-boards are standard. Includes beveled toe-guards and electric toe-guards around perimeter of platform.
External 6.5 HP 208-230/460V, 3-phase, 60 Hz motor may be located up to 8 feet away from lift. OSHA and ANSI compliant.
Safety Features:
The electric toe-guard is a patented feature essential to the safety of personnel. The guard is made from L-shaped aluminum extrusion and hangs below the entire perimeter of the deck. If the Scissor Dock is being lowered while an object such as a person’s hand or foot is in its path, the guard will be triggered and electrically stop the table from lowering. Once the object is removed, the table will once again be operable; there is no need to reset the unit. Without toe-guard provisions, scissor tables do not meet OSHA or ANSI standards and are extremely dangerous to operate.
All models available: (Request Quote at: quote_request@hayestrading.com) | Premium Truck Scissor Dock Lifts | | Model | Platform Size (WxL) | Lowered Height | Raised Height | Capacity (lbs) | Overall Frame Size (WxL) | Net Weight (lbs) | | WL-100-5-48 | 48"x96" | 8" | 68" | 5,000 | 41"x93" | 3125 | | WL-100-5-68 | 72"x96" | 8" | 68" | 5,000 | 62"x93" | 3485 | | WL-100-5-78 | 84"x96" | 8" | 68" | 5,000 | 62"x93" | 3706 | | WL-100-5-88 | 96"x96" | 8" | 68" | 5,000 | 86"x93" | 3952 | | WL-100-5-610 | 72"x120" | 8" | 68" | 5,000 | 62"x93" | 3823 | | WL-100-5-710 | 84"x120" | 8" | 68" | 5,000 | 62"x93" | 4027 | | WL-100-5-810 | 96"x120" | 8" | 68" | 5,000 | 86"x93" | 4107 | | WL-100-6-68 | 72"x96" | 10" | 70" | 6,000 | 62"x93" | 3648 | | WL-100-6-78 | 84"x96" | 10" | 70" | 6,000 | 62"x93" | 3788 | | WL-100-6-88 | 96"x96" | 10" | 70" | 6,000 | 86"x93" | 4167 | | WL-100-6-610 | 72"x120" | 10" | 70" | 6,000 | 62"x93" | 3939 | | WL-100-6-710 | 84"x120" | 10" | 70" | 6,000 | 62"x93" | 4038 | | WL-100-6-810 | 96"x120" | 10" | 70" | 6,000 | 86"x93" | 4301 | | WL-100-8-68 | 72"x96" | 10" | 70" | 8,000 | 62"x93" | 4396 | | WL-100-8-78 | 84"x96" | 10" | 70" | 8,000 | 62"x93" | 4592 | | WL-100-8-88 | 96"x96" | 10" | 70" | 8,000 | 86"x93" | 4698 | | WL-100-8-610 | 72"x120" | 10" | 70" | 8,000 | 62"x118" | 4807 | | WL-100-8-710 | 84"x120" | 10" | 70" | 8,000 | 62"x118" | 4913 | | WL-100-8-810 | 96"x120" | 10" | 70" | 8,000 | 86"x118" | 5157 | | WL-100-10-68 | 72"x96" | 12" | 72" | 10,000 | 62"x93" | 5804 | | WL-100-10-78 | 84"x96" | 12" | 72" | 10,000 | 62"x93" | 5991 | | WL-100-10-88 | 96"x96" | 12" | 72" | 10,000 | 86"x93" | 6177 | | WL-100-10-610 | 72"x120" | 12" | 72" | 10,000 | 62"x118" | 6037 | | WL-100-10-710 | 84"x120" | 12" | 72" | 10,000 | 62"x118" | 6224 | | WL-100-10-810 | 96"x120" | 12" | 72" | 10,000 | 86"x118" | 6410 | | WL-100-10-612 | 72"x144" | 12" | 72" | 10,000 | 62"x118" | 6504 | | WL-100-10-712 | 84"x144" | 12" | 72" | 10,000 | 62"x118" | 6690 | | WL-100-10-812 | 96"x144" | 12" | 72" | 10,000 | 86"x118" | 6876 | | WL-100-12-68 | 72"x96" | 12" | 72" | 12,000 | 62"x93" | 6387 | | WL-100-12-78 | 84"x96" | 12" | 72" | 12,000 | 62"x93" | 6573 | | WL-100-12-88 | 96"x96" | 12" | 72" | 12,000 | 86"x93" | 6731 | | WL-100-12-610 | 72"x120" | 12" | 72" | 12,000 | 62"x118" | 6620 | | WL-100-12-710 | 84"x120" | 12" | 72" | 12,000 | 62"x118" | 6807 | | WL-100-12-810 | 96"x120" | 12" | 72" | 12,000 | 86"x118" | 6993 | | WL-100-12-612 | 72"x144" | 12" | 72" | 12,000 | 62"x118" | 7098 | | WL-100-12-712 | 84"x144" | 12" | 72" | 12,000 | 62"x118" | 7225 | | WL-100-12-812 | 96"x144" | 12" | 72" | 12,000 | 86"x118" | 7436 |
Premium Truck Scissor Dock Lift Options
 SPLIT ALUMINUM TRUCK BRIDGE: Standard steel bridge can be replaced with an aluminum bridge 72" wide x 18" long. Ideal for government applications. Model WL-SATB.
SPLIT STEEL BRIDGE: An additional split steel bridge can be added to opposite side of unit. 72" wide x 18" long. Model WL-SSTB.
REMOVABLE HANDRAILS/TOEBOARDS: When mounting this lift in a pit, this option allows platform to be flush with the floor for fork truck cross traffic. Deduct 712" from overall width for usable width. Model WL-RHT.
WARNING BEEPER & STROBE: Sounds and flashes during lifting and lowering operations. 80 decibels. Model WL-WB.
ADDITIONAL HYDRAULIC LINE: To order, tag model number with suffix WL-HH-(the amount of line needed in feet). Model WL-HH. (8 foot hose standard)
APPROACH RAMP FOR 8" LOWERED HEIGHT LIFTS: 60" wide x 65" long. 7° ramp angle. 308 lbs. Model WL-AR8.
 APPROACH RAMP FOR 10" LOWERED HEIGHT: 60" wide x 82" long. 7° ramp angle. 395 lbs. Model WL-AR10.
APPROACH RAMP FOR 12" LOWERED HEIGHT: 60" wide x 98" long. 7° ramp angle. 474 lbs. Model WL-AR12.
**APPROACH RAMPS MUST BE ANCHORED TO THE FLOOR**
50,000 lbs. ROLLOVER CAPACITY (25,000 lbs. per axle): Add'l structural channel and supports for deck. Increases lowered height 2". Model WL-50.
MOBILE WHEEL KIT: Kit may be used on the 5,000 and 6,000 lbs. capacity units only. System includes a dolly jack. Model WL-WK.
SAFETY ACCORDION SKIRTS: Keep people and debris from getting under lift. We recommend customer installed skirts to avoid freight damage. Model WL-ASC. (customer installed) Model WL-ASF. (factory installed)
SPECIAL RESERVOIR MOUNTING: We can fabricate a platform for your power unit if motor cannot sit on the ground or if unit is portable. Model WL-RMB.
AUTOMATIC WHEEL CHOCKS: As the unit lifts, this option will block dock end of ramp to avoid roll off. System requires a special pit mount. Model WL-AWC.
 STOP SIGNAL SIGN: As the truck approaches the lift, the sign raises to let the driver know when to stop for safe loading/unloading. Model WL-SSS.
KEY LOCK OPERATION: To avoid unauthorized use of the lift, this option will lock out the controls. Model WL-KL.
TWO SPEED PUMP: Increase lifting speed by 55% when lift is unloaded. Ideal for unloading applications. Model WL-TSP.
2 HP SINGLE OR THREE PHASE ELECTRIC MOTOR: Consult factory for lift speeds. Both internal and external power units available. Model WL-2HP.
3 HP SINGLE PHASE ELECTRIC MOTOR: Replace standard three phase power unit with 208/230V, 1 phase, 60Hz power unit (112 gallons per minute pump speed). Model WL-3HP.
7-1/2 HP POWER UNIT: Power unit is wired for three phase 208-230/460V 60Hz, unit will pump 6 gallons per minute. Model WL-7HP.
10 HP POWER UNIT: Power unit is wired for three phase 208-230/460V 60Hz, unit will pump 8 gallons per minute. Model WL-10HP.
 GALVANIZED COATING: Cold galvanized coating designed for washdown applications and wet environments. Model SPO-WL-LS-ZRC.
STEEL-IT™ COATING: Designed for incidental food contact and washdown environments. FDA approved. Model SPO-WL-LS-SSC.
OIL HEATER: For cold weather applications. Unit supplied with thermostat for automatic heat control. 208-230V single/three phase power. 350 watts. Model WL-H2.
OIL HEATER: Same as above; to be used with 460V three phase power unit, 0.75 amps 350 watts. Model WL-H4.
SHIPPING INFO:
U.S. and International Buyers NOTE: This item requires shipping via freight carrier. You may use your own carrier or pick up your item. Please call Toll Free 1-877-424-4908 or Direct at 630-340-4887 or email quote_request@hayestrading.com to request a freight quote and production lead time. Lead times vary for each product and for multiple item orders. | |
|
More Material Handling & Industrial Selections: |
|
|
| About Us |
Our Business-Industrial division offers Material Handling Equipment, including Yard Ramps, Dumpers, Scissor Lifts, Drum Handling Equipment, Dock Levelers and other industrial equipment. We are authorized distributors for Arrow Material Handling, Autoquip Corporation, Bluff Manufacturing, Darex Industrial Drill Sharpeners, Gorbel, Genie Industries, Nilfisk-Advance, Spanco and Vestil Manufacturing. |
|
. |
Policies
PAYMENT OPTIONS:
We accept 1) PayPal, 2) Company Checks, 3) Cashiers Checks, 4) All major credit cards, 5) Wire Transfers, and 6) Financing for purchases over $2,000 - Request Application
Payment arrangements can be made by calling Toll Free 1-877-424-4908 or Direct at (630) 340-4887. We can set terms based upon credit. Credit Options: 20% Due at time of order, remainder due prior to shipping; For excellent credit, 20% due at time of order, remainder due Net 30.
For any questions regarding payment or to process a direct credit card purchase, please call Toll Free 1-877-424-4908 or Direct at (630) 340-4887 or email us at sales@hayestrading.com.
TAXES & FEES:
ILLINOIS SALES TAX: Hayes Trading Co is an Illinois corporation. Orders within the state of Illinois are charged a 7.75% sales tax. HANDLING: There are NO additional handling charges added to your stated shipping cost. Your total cost is the price of your item plus the stated shipping charge and insurance, if applicable.
SHIPPING:
U.S. and International Buyers NOTE: This item is shipped via freight, fully insured. You may also use your own carrier or arrange for pick up. Please call Toll Free 1-877-424-4908 or Direct at (630) 340-4887 or email quote_request@hayestrading.com to request a Freight Quote. Shipping lead times vary based upon production schedules & multiple item orders (from 2-6 weeks). We can provide current production lead times upon request.
INTERNATIONAL SHIPMENTS: We ship worldwide for most items. International shipping charges vary due to weight, size and destination. All customs and other country specific charges are the responsibility of the buyer. We reserve the right to request additional information from international buyers or to reject buyers with negative feedback history or zero feedback.
DAILY OPERATIONS: M-F 8am-5pm CST. Shipping timeframes do not include Saturday, Sunday, or Holidays.
REFUNDS & RETURNS:
We accept returns 14 days following delivery of your order (20 days for international buyers).
Any merchandise authorized for return must be new, complete, and in saleable condition.
A copy of our original receipt and the Return Authorization number (provided by us) must be included, call Toll Free 1-877-424-4908 or Direct at (630) 340-4887 or email us at returns@hayestrading.com.
All returns must be shipped prepaid. All industrial equipment returns are subject to a 20% restocking fee plus any refurbishing cost, if necessary.
PRIVACY POLICY: ALL information on our customers is absolutely confidential and may only be shared with our suppliers as necessary to process and ship your order. We do not sell or distribute names, email addresses, phone numbers or addresses for any reason.
- EMAIL: Send an email to sales@hayestrading.com
- CLICK: Click on "Ask the seller a question"
- CALL US: Toll Free 1-877-424-4908 or Direct at (630) 340-4887
- FAX: (630) 240-255-7731
We will respond within 24 Hours (Usually much less!)
All other trademarks, logos, service marks, product names, and company names in this listing are the property of their respective owners. |
|
Hayes Trading Co
2320 Sans Souci, Aurora, IL 60506
Toll Free 1-877-424-4908 or Direct at (630) 340-4887
Incorporated In The State Of Illinois
CCR CAGE CODE: 339U3; Certified Illinois MBE #450505579;
PRIMARY NAICS CODE: 423830
PRIMARY SIC CODES: 5085, 5084
Be sure to add us to your favorites list! | 
|
Back to Search Results
) 
HayesTradingCo
Print
Report item
and your