A reserve price is the minimum price the seller will accept. This price is hidden from bidders. To win, a bidder must have the highest bid and have met or exceeded the reserve price.
You Are Bidding On A Brand New Cantilever Adjustable Tilting/Swiveling Wall Mount Bracket with extending arm for LCD/Plasma TV's 32-52
This is an extremely heavy duty mount, unlike many of the cheaper mounts on eBay. Protect your investment with a high quality wall mount and save today!
This mount has been tested and approved for the following LCD/Plasma TV's 32-52 Inches
Our mounts are brand new, sealed. Not refurbished or used.
Your Mount will ship same day guaranteed, excluding weekends and holidays
We ship VIA UPS ground, fully insured with tracking, shipping time is usually around 5 days, but most of the time its much quicker
We offer and unconditional warranty on all of our mounts, your satisfaction is guaranteed, no questions. If you have a problem with your mount, or if it doesn't work for you, you can return it for a full refund, no questions asked.
Customer service is our number one priority, please check our feedback and see that we are trusted powersellers.
If you have any questions, please feel free to contact us, we answer any and all emails.
Adjustable Tilting/Swiveling Wall Mount Bracket for LCD Plasma L-Shape (Max 125Lbs, 32~52inch)
This Full Motion mount offers the same high quality, all steel construction with a longer single arm design instead of the dual arm, like our other listings. This allows for greater flexibility and range of motion since the arm is longer and not limited by a second arm.
Warning: This mounting bracket is not compatible with certain LG (r), PIONEER(r) and Sharp(r) brand TVs. Specifically, the following models are not compatible. Pioneer: PDP-6100HD, PRO-1410HD, PDP-614MX, PDP-6070HD, PRO-1540HD, PDP-607CMX, PRO151FD. Sharp: LC-65D93U, LC-65D90U, LC-57D90U, LC-65D64U, LG: LG52LG50-UA, (use pid# 3004) LG52LG50 (use pid#3004), Phillips 42PF9630A137 (use pid #3004)
Adjustable Tilting/Swiveling Wall Mount Bracket for LCD Plasma L-Shape (Max 125Lbs, 32~52inch)
Compatibility -
Will fit large flat panel plasma and LCD TVs with mounting patterns up to VESA 770x480. *Mounting holes on television should be 30" or less apart horizontally & 18.75" or less apart vertically. Maximum weight capacity: 125lbs
Dimensions -
Front plate: 32" x 9 3/8"* Wall plate: 18.9" x 9.37"* *Measurements are from edge to edge. Mounting points for bolts will be shorter.
Range of Motion -
Tilt: -15 to +15 degree up and down. Swivel: -90 to +90 degree side to side Extension from wall: about 5" to 29.5"
Design & Construction:
Solid 2.5mm heavy-gauge cold steel construction Durable powder-coated finish in black Easy installation.
Includes:
Wall Bracket
Screws to go into the back of the TV
Fittings for brick and stud walls
Instruction Manual
Customer Reviews!
Rating: (10 out of 10)
Reviewer: TXST8tj from Katy, TX
12/29/2008 8:28:34 AM
cant be beat
First off, I wanted to praise DDS once again for their super fast delivery. I ordered this mount on a Sunday night (order processed Monday morning) and it was sitting on my porch when I got home from work on Thursday. This has also been the case with everything else I have purchased from DDS. Unless you need it next day, dont bother with the upgraded shipping.
Upon picking up the box, my initial impression of this mount was that it is quite heavy. Once you remove the mount from the box, you realize that while it is heavy, it is the beefiness and pure stoutness of the construction that makes this a mount worth having. There are NO lightweight parts on any part of the mount.
The arms articulate with ease. The bolts at each arm can be loosened or tightened to ease or prevent movement.
The plate that sits against, and is bolted to the wall is wide enough to span two studs 16 apart, and has plenty of holes in case your builder was not so precise. The two arms are beefy and connect to another solid plate that the TV actually mounts to via 2 connecting arms. This plate is probably too wide for a 32 TV (unless you have an older model with the speakers on the sides vs. underneath) because you can see it sticking out beyond the sides of your TV, but any size larger than 32 should not be an issue. I have a 32 Insigina LCD on this mount and looking straight at the screen, you cannot see the plate, but any bit off to the side and you can see it. I can personally deal with this issue.
I have an older house with studs ~22 apart vs. 16 so I was only able to tie into one stud. I used 3 lag bolts into the stud I had access to on one side of the mount, and purchased 4 toggle bolts for the side solely in drywall. Ideally, this mount would be secured into two studs, but I feel that my setup is very secure and safe considering it does not flex or move in the least, articulating with the LCD mounted.
I am extremely happy with this mount. I would recommend this mount to anyone in the market for one of this style. For the strength and design, the price cant be beat. You could buy 4 of these for what a similar one of another brand will cost.
I come back time after time to DDS for their high quality products at amazingly low prices. I have purchased speakers, wiring, cables, wall plates, and this TV mount and each product has surpassed my expectations.
Rating: (10 out of 10)
Reviewer: Anonymous from Elephant Butte, NM
12/26/2008 7:03:14 PM
WOW
Mounted 42 LCD to my fireplace. Cant tell you how happy we are with this mount.
Rating: (10 out of 10)
Reviewer: Matt from Liverpool, NY
12/14/2008 1:00:30 PM
I like it a lot...
I got this mount within the past week. It was easy to assemble and install, but it is heavy, so you may want help holding it up to the wall when installing, or you could disassemble the arm from the wall plate, and then reinstall the arm after the plate is on the wall.
I used this mount to hang a 37 inch LCD TV, and it is great to be able to pull the tv away from the wall and rotate it 90 degrees so I can see the tv from the other room. Even when the arm is fully extended, it is very strong and stable.
I am very impressed with the strength of this mount. It is thick, heavy steel, and comes with high-quality fasteners and hardware. I cannot see how other retailers can sell inferior merchandise for a price that is four times higher.
Rating: (10 out of 10)
Reviewer: Speedy5310 from Riverside, CA
12/6/2008 9:19:50 PM
Perfect
I have a Philips 32 and put it up with this mount by myself. Im 57 so thats saying a lot. Instructions were not very good but any conscious human being can figure it out. I love that the mount comes out 30. Way cheaper than Costco, Best Buy, and Circuit City on Black Friday.
Payment
We accept paypal, and credit cards through paypal. Visa, Mastercard, Discover and American Express
Shipping
Your Order will be shipped same day, Guaranteed (excluding weekends and holidays)
Our products ship VIA FEDEX Ground, Fully insured with tracking
A tracking number will be sent to your Registered Ebay Email Address as soon as it becomes available
We do offer shipping discounts on multiple items, this discount can be applied with a modified invoice.
Returns
We offer a 21-day return policy. If you have a problem with your item, you can return it for a full refund, or exchange it for a similar item
We will send you an RMA# along with return address and instructions
Shipping Calculator
Please see the following Standard 3-5 Business Day Shipping Transit Time Chart below.
00559
Shipping and handling
Save 35% on shipping for each additional eligible items you buy from digital_design_solutions.
*The estimated delivery time is based on the seller's handling time, the shipping service selected, and when the seller receives cleared payment. Sellers are not responsible for shipping service transit times. Transit times may vary, particularly during peak periods.
Back to home page
) 
Print
Report item
(10 out of 10)
First off, I wanted to praise DDS once again for their super fast delivery. I ordered this mount on a Sunday night (order processed Monday morning) and it was sitting on my porch when I got home from work on Thursday. This has also been the case with everything else I have purchased from DDS. Unless you need it next day, dont bother with the upgraded shipping. 
and your 