UNLOCKED LINKSYS SPA3000 VOIP FXS PSTN PHONE ADAPTER

Ports: 1 FXS + 1 FXO + 1 Ethernet
Supported Protocols: SIP

Condition: New in box

Product Description:

Micro-Density PSTN Gateway + ATA Combo Solution

The SPA-3000 continues to deliver on Sipura Technologys mission to provide market leading, best-in-class VoIP end points providing freedom and opportunity to service providers and end users. The SPA-3000 features VoIP adapter functionality found in the SPA-2000 and SPA-1000/1 with the additional benefit of an integral connection for legacy telephone network hop-on, hop-off applications. SPA-3000 users will be able to leverage their broadband phone service connections more than ever by automatically routing local calls from cell phones and land lines to a VoIP service provider and vice versa. A typical user calling from a land line or mobile phone will be able to reduce and even eliminate international and long distance telephone charges by first calling their SPA-3000 via a local phone number or by using a telephone connected directly to the unit. The advanced authentication and call routing intel-ligence programmed into the SPA-3000 will connect the caller via the Internet to the far end destination with security and ease. Using the SPA-3000 at the far end, calls can be answered immediately or further processed as a local call to any legacy land line or mobile phone allowed by the SPA-3000 dial plan.

If power and/or IP network connectivity is lost to the unit or the VoIP service is down, calls can be sent to a traditional carrier via the FXO interface.

SPA-3000 Telephony Features:

• VoIP to PSTN (USA) Service Call Origination and Termination
• PSTN (USA) to VoIP Service Call Origination and Termination
• Single or Dual Stage Dialing
• Service Authentication via PIN, Digest, Caller ID (Bellcore Type 1)
• Per Call Authentication and Associated Routing
• Least Cost Routing Support
• Terminating Impedance Agnostic - 8 Configurable Settings
• Call Waiting, Cancel Call Waiting
• Caller ID Detection (Bellcore Type 1)
• Caller ID with Name/Number (Multinational Varients) Display
• Caller ID Blocking
• Call Waiting Caller ID with Name/Number
• Call Forwarding to PSTN or VoIP Service: No Answer/Busy/All
• Do Not Disturb
• Call Transfer
• Three-Way Conference Calling with Local Mixing
• Message Waiting Indication - Visual and Tone Based
• Call Return and Call Back on Busy
• Call Blocking with Toll Restriction
• Distinctive Ringing
• Off-Hook Warning Tone
• Selective/Anonymous Call Rejection
• Hot Line and Warm Line Calling
• Speed Dialing of 8 Numbers/Addresses
• Music on Hold
• Forward Calls to VoIP service - Selective, Authenticated, All
• Forward Calls to PSTN service - Selective, Authenticated, All
• PSTN Line Sharing with Multiple Extensions
• Automatic PSTN Fallback (Loss of Power or IP Service to Unit - with Quiescence to Normal Operations)
• Advanced Inbound and Outbound Call Routing
• Single Stage and Two Stage Dialing
• Independent Configurable Dial Plans - Up to 8
• Force PSTN Disconnection

Sequential Dialing Support


VoIP to PSTN Authentication and Routing

• VoIP to PSTN Gateway Enable/Disable
• VoIP Caller Auth Method (None, PIN, HTTP Digest)
• VoIP PIN Max Retry Setting
• One Stage Dialing Enable/Disable
• VoIP Caller ID Pattern Matching
• VoIP Access Allowed Caller List (No Further Authentication)
• VoIP Caller PIN and Associated Dial Plan
  

PSTN to VoIP Authentication and Features

• PSTN to VoIP Gateway Enable/Disable
• Caller Auth Method: None, PIN, Caller ID
• Ring Through to FXS Enable/Disable
• Ring Through Tone - Configurable
• Caller ID (Bellcore 1) for VoIP Service Access
• Caller ID Enable/Disable
• PIN Max Retry Settings
• Access Allowed Caller List (No Further Authentication)
• Caller PIN and Associated Dial Plan
• Least Cost Routing (via Outbound VoIP - Line1 Dial Plan)

FXO Behavior

• VoIP Answer Delay Timer
• PSTN Answer Delay Timer
• VoIP PIN Digit Time-Out Timer
• PSTN PIN Digit Time-Out Timer
• PSTN-to-VoIP Call Max Dur Timer
• VoIP-to PSTN Call Max Dur Timer
• PSTN Ring Through Delay Timer
• PSTN Dialing Delay Timer
• VoIP DIG Refresh Interval Timer
• PSTN Ring Time-out Timer

PSTN Disconnection Detection

• CPC (Removal of Tip/Ring Voltage Momentarily)
• Polarity Reversal
• Long Silence (Confugrable Time Setting)
• Disconnect Tone (e.g. Reorder Tone)
• FXO Port Impedance - Configurable to 16 settings
• Ring Frequency - Configurable
• SPA to PSTN and PSTN to SPA Gain Settings
• Ring Frequency - Maximum Setting
• Ring Validation Time Setting
• Tip/Ring Voltage Adjustment Setting
• Ring Indication Delay Setting
• Operational Loop Current Minimum Value
• Ring Time-out Setting
• On-Hook Speed Setting
• Ringer Impedance Setting
• Line-in-Use Voltage Setting

Regulatory Compliance

• FCC (Part 15 Class B and Part 68) , CE , ICES-003

Security

• Password Protected System Reset to Factory Default
• Password Protected Admin and User Access Authority
• Provisioning/Configuration/Authentication:
• HTTP Digest - Encrypted Authentication via MD5 (RFC 1321)
• Up to 256-bit AES Encryption

Documentation

• Quick-Start Installation and Configuration Guide
• User Guide
• Administration Guide - Service Providers Only
• Provisioning Guide - Service Providers Only

Package Contents

• 1 - SPA3000 Phone Adapter Unit
• 1 - Universal Power Adaptor (100-240V)
• 1 - RJ45 Ethernet Cable
• 1 - RJ11 Telephone Cable

Dimensions: 4.05 x 1.1. x 3.75 in (102.87 x 27.94 x 95.25 mm) W x H x D
Unit Weight: 2.15 lb (0.975 kg)

Data Networking

• MAC Address (IEEE 802.3)
• IPv4 - Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC 1883)
• ARP - Address Resolution Protocol
• DNS - A Record (RFC 1706), SRV Record (RFC 2782)
• DHCP Client - Dynamic Host Configuration Protocol (RFC 2131)
• ICMP - Internet Control Message Protocol (RFC792)
• TCP - Transmission Control Protocol (RFC793)
• UDP - User Datagram Protocol (RFC768)
• RTP - Real Time Protocol (RFC 1889) (RFC 1890)
• RTCP - Real Time Control Protocol (RFC 1889)
• DiffServ (RFC 2475), Type of Service - TOS (RFC 791/1349)
• SNTP - Simple Network Time Protocol (RFC 2030)

Voice Gateway

• SIPv2: Session Initiation Protocol v2 (RFC 3261, 3262, 3263, 3264)
• SIP Proxy Redundancy - Dynamic via DNS SRV, A Records
• Re-registration with Primary SIP Proxy Server
• SIP Support in Network Address Translation Networks - NAT (incl. STUN)
• Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP
• Codec Name Assignment

Voice Algorithms

• G.711 (A-law and ????????????????-law),
• G.726 (16/24/32/40 kbps),
• G.729 A,
• G.723.1 (6.3 kbps, 5.3 kbps)
• Dynamic Payload
• Adjustable Audio Frames per Packet

Fax Capability

• Fax Tone Detection and Pass-Through (Using .711)
• DTMF: In-band & Out-of-band (RFC 2833) (SIP Info)
• Flexible Dial Plan Support with Interdigit Timers and IP Dialing
• Call Progress Tone Generation
• Jitter Buffer - Adaptive
• Frame Loss Concealment
• Full Duplex Audio
• Echo Cancellation (G.165/G.168)
• VAD - Voice Activity Detection with Silence Suppression
• Attenuation / Gain Adjustments
• Flash Hook Timer
• MWI - Message Waiting Indicator Tones
• VMWI - Visual Message Waiting Indicator via FSK
• Polarity Control
• Hook Flash Event Signaling
• Caller ID Generation (Name & Number) - Bellcore, DTMF, ETSI
• Music on Hold Client
• Streaming Audio Server - up to 10 sessions

Provisioning, Administration & Maintenance:

• Web Browser Administration & Configuration via Integrated Web Server
• Telephone Key Pad Configuration with Interactive Voice Prompts
• Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP
• Asynchronous Notification of Upgrade Availability via SIP NOTIFY
• Non-intrusive, In-Service Upgrades
• Report Generation & Event Logging
• Stats in BYE Message
• Syslog & Debug Server Records - Per Line Configurable

Physical Interfaces:

• 1 10baseT RJ-45 Ethernet Port (IEEE 802.3)
• 1 RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device (Tip/Ring)
• 1 RJ-11 FXO Phone Ports - For a Telco or PBX Connection

FXS: Subscriber Line Interface Circuit (SLIC):

• Ring Voltage: 40-55 VRMS Configurable l*
• Ring Frequency: 10 Hz - 40 Hz l*
• Ring Waveform: Trapezoidal and Sinusoida l*
• Maximum Ringer Load: 3 REN
• On-hook/off-hook Characteristics:
• On-hook voltage (tip/ring): -50 V NOMINAL
• Off-hook current: 25 mA min
• Terminating Impedance: 8 Configurable Settings including
• North America 600 ohms, European CTR21

Power Supply:

• DC Input Voltage: +5 VDC at 2.0 A Max.
• Power Consumption: 5 Watts
• Switching Type (100-240v) Automatic
• Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input, 1.8m cord

Indicator Lights/LED:

• LAN Activity/Link LED, Status LED (In-Use, Povisioning, Idle, Alert)

SPA Model	Service Lines	Active Calls	3-Way Conferences	FXO Ports
SPA-1001	2	2	1	0
SPA-2002	2	4	2	0
SPA-2100	2	4	2	0
SPA-3000	2	3	1	1

Note: The SPA-2100 supports up to 2 sessions using G.729. The SPA-1001, SPA-2002 and SPA-3000 support one G.729 session