|
|
| Payment |
|
 |
 |
| | |
|
| |
|
|
|
| Description |
|
Micro-Density PSTN Gateway + ATA Combo Solution
The SPA-3000 continues to deliver on Sipura Technologys mission to provide market leading, best-in-class VoIP end points providing freedom and opportunity to service providers and end users. The SPA-3000 features VoIP adapter functionality found in the SPA-2000 and SPA-1000/1 with the additional benefit of an integral connection for legacy telephone network hop-on, hop-off applications. SPA-3000 users will be able to leverage their broadband phone service connections more than ever by automatically routing local calls from cell phones and land lines to a VoIP service provider and vice versa. A typical user calling from a land line or mobile phone will be able to reduce and even eliminate international and long distance telephone charges by first calling their SPA-3000 via a local phone number or by using a telephone connected directly to the unit. The advanced authentication and call routing intel-ligence programmed into the SPA-3000 will connect the caller via the Internet to the far end destination with security and ease. Using the SPA-3000 at the far end, calls can be answered immediately or further processed as a local call to any legacy land line or mobile phone allowed by the SPA-3000 dial plan.
If power and/or IP network connectivity is lost to the unit or the VoIP service is down, calls can be sent to a traditional carrier via the FXO interface.
SPA-3000 Telephony Features:
VoIP to PSTN (USA) Service Call Origination and Termination
PSTN (USA) to VoIP Service Call Origination and Termination
Single or Dual Stage Dialing
Service Authentication via PIN, Digest, Caller ID (Bellcore Type 1)
Per Call Authentication and Associated Routing
Least Cost Routing Support
Terminating Impedance Agnostic - 8 Configurable Settings
Call Waiting, Cancel Call Waiting
Caller ID Detection (Bellcore Type 1)
Caller ID with Name/Number (Multinational Varients) Display
Caller ID Blocking
Call Waiting Caller ID with Name/Number
Call Forwarding to PSTN or VoIP Service: No Answer/Busy/All
Do Not Disturb
Call Transfer
Three-Way Conference Calling with Local Mixing
Message Waiting Indication - Visual and Tone Based
Call Return and Call Back on Busy
Call Blocking with Toll Restriction
Distinctive Ringing
Off-Hook Warning Tone
Selective/Anonymous Call Rejection
Hot Line and Warm Line Calling
Speed Dialing of 8 Numbers/Addresses
Music on Hold
Forward Calls to VoIP service - Selective, Authenticated, All
Forward Calls to PSTN service - Selective, Authenticated, All
PSTN Line Sharing with Multiple Extensions
Automatic PSTN Fallback (Loss of Power or IP Service to Unit - with Quiescence to Normal Operations)
Advanced Inbound and Outbound Call Routing
Single Stage and Two Stage Dialing
Independent Configurable Dial Plans - Up to 8
Force PSTN Disconnection
Sequential Dialing Support
VoIP to PSTN Authentication and Routing
- VoIP to PSTN Gateway Enable/Disable
- VoIP Caller Auth Method (None, PIN, HTTP Digest)
- VoIP PIN Max Retry Setting
- One Stage Dialing Enable/Disable
- VoIP Caller ID Pattern Matching
- VoIP Access Allowed Caller List (No Further Authentication)
- VoIP Caller PIN and Associated Dial Plan
PSTN to VoIP Authentication and Features
- PSTN to VoIP Gateway Enable/Disable
- Caller Auth Method: None, PIN, Caller ID
- Ring Through to FXS Enable/Disable
- Ring Through Tone - Configurable
- Caller ID (Bellcore 1) for VoIP Service Access
- Caller ID Enable/Disable
- PIN Max Retry Settings
- Access Allowed Caller List (No Further Authentication)
- Caller PIN and Associated Dial Plan
- Least Cost Routing (via Outbound VoIP - Line1 Dial Plan)
FXO Behavior
- VoIP Answer Delay Timer
- PSTN Answer Delay Timer
- VoIP PIN Digit Time-Out Timer
- PSTN PIN Digit Time-Out Timer
- PSTN-to-VoIP Call Max Dur Timer
- VoIP-to PSTN Call Max Dur Timer
- PSTN Ring Through Delay Timer
- PSTN Dialing Delay Timer
- VoIP DIG Refresh Interval Timer
- PSTN Ring Time-out Timer
PSTN Disconnection Detection
- CPC (Removal of Tip/Ring Voltage Momentarily)
- Polarity Reversal
- Long Silence (Confugrable Time Setting)
- Disconnect Tone (e.g. Reorder Tone)
- FXO Port Impedance - Configurable to 16 settings
- Ring Frequency - Configurable
- SPA to PSTN and PSTN to SPA Gain Settings
- Ring Frequency - Maximum Setting
- Ring Validation Time Setting
- Tip/Ring Voltage Adjustment Setting
- Ring Indication Delay Setting
- Operational Loop Current Minimum Value
- Ring Time-out Setting
- On-Hook Speed Setting
- Ringer Impedance Setting
- Line-in-Use Voltage Setting
Regulatory Compliance
- FCC (Part 15 Class B and Part 68) , CE , ICES-003
Security
- Password Protected System Reset to Factory Default
- Password Protected Admin and User Access Authority
- Provisioning/Configuration/Authentication:
- HTTP Digest - Encrypted Authentication via MD5 (RFC 1321)
- Up to 256-bit AES Encryption
Documentation
- Quick-Start Installation and Configuration Guide
- User Guide
- Administration Guide - Service Providers Only
- Provisioning Guide - Service Providers Only
Package Contents
- 1 - SPA3000 Phone Adapter Unit
- 1 - 5v Power Adapter
- 1 - RJ45 Ethernet Cable
- 1 - RJ11 Telephone Cable
Dimensions: 4.05 x 1.1. x 3.75 in (102.87 x 27.94 x 95.25 mm) W x H x D
Unit Weight: 2.15 lb (0.975 kg)
Data Networking
- MAC Address (IEEE 802.3)
- IPv4 - Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC 1883)
- ARP - Address Resolution Protocol
- DNS - A Record (RFC 1706), SRV Record (RFC 2782)
- DHCP Client - Dynamic Host Configuration Protocol (RFC 2131)
- ICMP - Internet Control Message Protocol (RFC792)
- TCP - Transmission Control Protocol (RFC793)
- UDP - User Datagram Protocol (RFC768)
- RTP - Real Time Protocol (RFC 1889) (RFC 1890)
- RTCP - Real Time Control Protocol (RFC 1889)
- DiffServ (RFC 2475), Type of Service - TOS (RFC 791/1349)
- SNTP - Simple Network Time Protocol (RFC 2030)
Voice Gateway
- SIPv2: Session Initiation Protocol v2 (RFC 3261, 3262, 3263, 3264)
- SIP Proxy Redundancy - Dynamic via DNS SRV, A Records
- Re-registration with Primary SIP Proxy Server
- SIP Support in Network Address Translation Networks - NAT (incl. STUN)
- Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP
- Codec Name Assignment
Voice Algorithms
- G.711 (A-law and μ-law),
- G.726 (16/24/32/40 kbps),
- G.729 A,
- G.723.1 (6.3 kbps, 5.3 kbps)
- Dynamic Payload
- Adjustable Audio Frames per Packet
Fax Capability
- Fax Tone Detection and Pass-Through (Using .711)
- DTMF: In-band & Out-of-band (RFC 2833) (SIP Info)
- Flexible Dial Plan Support with Interdigit Timers and IP Dialing
- Call Progress Tone Generation
- Jitter Buffer - Adaptive
- Frame Loss Concealment
- Full Duplex Audio
- Echo Cancellation (G.165/G.168)
- VAD - Voice Activity Detection with Silence Suppression
- Attenuation / Gain Adjustments
- Flash Hook Timer
- MWI - Message Waiting Indicator Tones
- VMWI - Visual Message Waiting Indicator via FSK
- Polarity Control
- Hook Flash Event Signaling
- Caller ID Generation (Name & Number) - Bellcore, DTMF, ETSI
- Music on Hold Client
- Streaming Audio Server - up to 10 sessions
Provisioning, Administration & Maintenance:
- Web Browser Administration & Configuration via Integrated Web Server
- Telephone Key Pad Configuration with Interactive Voice Prompts
- Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP
- Asynchronous Notification of Upgrade Availability via SIP NOTIFY
- Non-intrusive, In-Service Upgrades
- Report Generation & Event Logging
- Stats in BYE Message
- Syslog & Debug Server Records - Per Line Configurable
Physical Interfaces:
- 1 10baseT RJ-45 Ethernet Port (IEEE 802.3)
- 1 RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device (Tip/Ring)
- 1 RJ-11 FXO Phone Ports - For a Telco or PBX Connection
FXS: Subscriber Line Interface Circuit (SLIC):
- Ring Voltage: 40-55 VRMS Configurable l*
- Ring Frequency: 10 Hz - 40 Hz l*
- Ring Waveform: Trapezoidal and Sinusoida l*
- Maximum Ringer Load: 3 REN
- On-hook/off-hook Characteristics:
- On-hook voltage (tip/ring): -50 V NOMINAL
- Off-hook current: 25 mA min
- Terminating Impedance: 8 Configurable Settings including
- North America 600 ohms, European CTR21
Power Supply:
- DC Input Voltage: +5 VDC at 2.0 A Max.
- Power Consumption: 5 Watts
- Switching Type (100-240v) Automatic
- Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input, 1.8m cord
Indicator Lights/LED:
- LAN Activity/Link LED, Status LED (In-Use, Povisioning, Idle, Alert)
| SPA Model |
Service Lines |
Active Calls |
3-Way Conferences |
FXO Ports |
| SPA-1001 |
2 |
2 |
1 |
0 |
| SPA-2002 |
2 |
4 |
2 |
0 |
| SPA-2100 |
2 |
4 |
2 |
0 |
| SPA-3000 |
2 |
3 |
1 |
1 |
Note:
The SPA-2100 supports up to 2 sessions using G.729. The SPA-1001, SPA-2002 and SPA-3000 support one G.729 session. |
Condition: 100% brand New
Package included: User Manual, SPA3000, Network Cable, Power Adaptor
Linksys - Sipura SPA-3000 Analog Adapter
Ports: 1 FXS + 1 FXO + 1 Ethernet
Supported Protocols: SIP
| |
| Shipping |
| Payment |
We accept Paypal only.
Please do not bid if you are not intend to buy. Unpaid dispute & the negative feedback will be filed to ebay for the non payable bidders.
Please check correctly our paypal ID when you make the payment for the items you want to buy.If you make the payment to the wrong Paypal ID,then we can't recieve your money,so we won't make shipment for you. | |
| Shipping |
|
1、We ship worldwide with flat rate shipping.We can also provide express post by EMS(5-8 days) or UPS(4-5 days). The
cost is a higher than standard postage, about $40 or higher.If you want post by EMS or UPS,please contact us.
2、We will use your shipping address filed on PayPal as the shipping address for the merchandise. If you would like to change the address, please contact us IMMEDIATELY after your payment.Please note that failure to follow the instructions or send us the request in a timely manner will result in your merchandise being dispatched to the original address stated on PayPal and we will not be responsible for it. Thank you for your co-operation.
3、All merchandise will be tested strictly before shipping and we provide 30 days exchange service from shipping date to
against defective merchandise.
4、The shipping fee includes not only the actual shipping cost, but also the fee to cover inventory management, labor, logistic, warehousing, sales and marketing related costs. Since the item will be shipped from the manufacture directly,Item will be marked as "Gift" and declared low value to minimize the custom tax. The item will be shipped from the original manufacturer in Hong Kong by Air Mail.
5、No shipping on weekend and public holidays. Normally it takes 7 to 15 business days to arrive.but some country maybe take longer time,please wait with patience.
6.About the losting items in the transfer,if item could not arrive to the customer about one month above(some country will be longer),then we will treat it as be lost,then we will resend another new one to our customers.but this situation is rare to occur!
** We DO NOT ship to ITALY or AFRICA **
(Italian buyers please contact us in advance before place bid.Cause item would take longer time about a month or above to arrive Italy,if you have enough patience to wait for the items,then you can buy it. )
| |
| Feedback |
|
We appreciate your positive feedback. Our system will leave feedback automatically after receive yours. Please leave us positive feedback upon satisfaction of the item.Please email us before leaving negative and neutral feedback. We will try our best to solve the issue.
Contact us
We will be glad to answer any question you may have, please feel free to contact us at:  . we do try respond as quickly as possible. Due to time zone difference, please allow 12~24 hours to get your mail replied. | |
| Contact us |
|
Your satisfaction is our first priority. Defective product will be offered exchange. NO REFUND, EXCHANGE ONLY. Returns are available within 30 days from the item's shipment date. All items MUST be returned in their orginal condition, not altered. All buyer ships merchandise at their own expense, defective or not. We take charge of the expenses shipping back to you. We do not reimburse the return shipping charges. Buyer is responsible for shipping and proof of delivery on all returns; please retain the tracking information until we ship the replacement item. Thank you for your patience and understanding in this matter. | | | | |
Back to Search Results
) 
notebookelite
Print
Report item
and your 