USA SPEC DF-TOY iPOD / AUX IN TO TOYOTA VEHICLES

The following information was copied from the USA-Spec Manual.

FEATURES

The DF-TOY (Similar to the PA15-TOY) auxiliary input adapter is designed to interface the audio outputs from devices such as XM radio receivers, DVD players, digital music players, iPods, games and etc directly to Toyota factory audio systems with CD Changer controls. The DF-TOY interface adapter has two AUX input ports namely AUX1 and AUX2 respectively. It is therefore able to interface two independent external audio sources to your factory radio. The DF-TOY takes the place of the external CD Changer and therefore it is not possible to have a 6-disc CD Changer and the DF-TOY simultaneously connected to the factory radio.

TOYOTA
- 1998-06 4-Runner
- 1998-06 Avalon
- 1998-06 Camry/Solara
- 1998-06 Corolla/Echo
- 1998-01 Land Cruiser
- 2005-06 Matrix
- 1998-06 Rav4
- 1998-06 Sequoia/Tundra
- 1998-06 Sienna
- 1998-06 Tacoma

PLEASE NOTE: SOME RECENT MODELS MAY NEED AN ADDITIONAL ADAPTER THAT DOES NOT COME WITH THIS KIT.

Not compatible with in-dash CD changer radio Not compatible with vehicles that are equipped with external cd changer, SAT, NAV or Video system.

PACKAGE CONTENTS:

DF-TOY interface adapter

Stereo to DF-TOY cable

RCA to mini-jack cable (fits into iPod headphone jack)

4 Mounting Screws

INSTALLATION
1. Remove the factory radio
2. Disconnect existing CD Changer from radio if there is one.
3. Connect the CAS-TYi 12-Pin plug to the receptor on the back of the radio. PLEASE NOTE: Recent Toyota and Scion vehicles will need to use the CAS-TA Y-adapter. (Connect the CAS-TA Y-adapter male plug to the back of the radio, then connect the CAS-TYi to the matching connector on the other end of the CAS-TA)
4. Connect the round DIN plug on the other end of the CAS-TYi to the DF-TOY connector labeled "RADIO"
5. Connect the audio output from your auxiliary device to the AUX1or /and AUX 2 input jacks on the DF-TOY
6. Reinstall the factory radio OPERATIONS Turn on your radio and press CD button. The radio will display CD 6 Track 1, CD 6 Track 1 gives access to AUX1 port of the DF-TOY and CD6 Track2 gives access to AUX2 port of the DF-TOY. Use the track UP/DOWN buttons to switch between AUX1 and AUX2. Adjust the VOLUME, BASS, TREBLE and etc, as you would normally do for the other program sources on the radio.

I used this device for over a year until I upgraded my entire stereo system. I worked just fine. I am selling AS IS and there is no printed manual to go with it. I ship only to addresses within the United States. Please email me with any questions prior to bidding. Thanks.