7 point process
Inspection: All cartridges are inspected before being processed. Cartridges with circuit failure, cracks, dents are rejected.
<!--[if !supportEmptyParas]-->
<!--[if !supportEmptyParas]-->
Rinse & Flush: Cartridges are rinsed and flushed out twice with a special solution to remove every drop of old ink.
<!--[if !supportEmptyParas]-->
<!--[endif]-->
Fill: We learned from experience that trying to cut the cost of ink was not giving the results we desired. We till our cartridges with only the highest quality dye base and pigmented ink. Expensive, YES After all, the Ink is the foundation of the cartridge.
<!--[if !supportEmptyParas]-->
Testing: Every black and color cartridge is tested with the use of printer buffers (no self testing). All cartridges must pass a full-page test sheet of solid 2-inch bars and different size characters to make sure that all jets are clear and properly working in order to proceed for packaging
<!--[endif]-->
<!--[if !supportEmptyParas]-->
Steam: After passing our strict testing, we prefer and use the steaming process to clean the print head. We found this method to be the best procedure to remove all Ink residues to prepare for taping
<!--[if !supportEmptyParas]-->
Cleaning & Taping: Cartridge surfaces are cleaned to ensure that customers never get their hands dirty. Like O.E.M. companies, we also seal our cartridges at a taping station. This method is done properly by machine rather than improperly by hand
<!--[endif]-->
Packaging: A protective shipping clip is attached to all cartridges, and then heat-sealed in a static shield bag. The cartridge is packed in a four-color high gloss box designed to catch the consumer’s eye
<!--[endif]-->
Track up to 10 items on this computer in 
)
