How To Appy The Decals

Our Line of Decals are simple, “Peel and Stick” type decals. For our smaller size decals, we recommend a dry application. For our tank decals, or large decals, you can use the dry application or a wet application method. Below you will find instructions for both types of applications.

Dry Application

Clean the surface where you will apply the decal. Use window cleaner, soapy water, or rubbing alcohol to prep the surface, and dry with a lint free cloth. The surface temperature should be between 55F to 70F, and not in direct sunlight.

With clean dry hands, peel the sticker from the backing card. Try to handle the decal as little as possible, only holding by the edges.

Line up the decal how you like it. Attach the bottom part of the decal to the surface, using a squeegee, rub the rest of the decal onto the surface.

If you have any air bubbles trapped, use a pin to make a small hole and rub until all bubbles are out.

Wet Application

Clean the surface where you will apply the decal. Use window cleaner, soapy water, or rubbing alcohol to prep the surface, and dry with a lint free cloth. The surface temperature should be between 55F to 70F, and not in direct sunlight.

Get a spray bottle, fill with water and add 2 to 3 drops of dish washing detergent, shake bottle to mix solution. Spray a light mist of the fluid on the desired location where you will apply the decal.

With clean dry hands, peel the sticker from the backing card. Try to handle the decal as little as possible, only holding by the edges.

Position the decal in the misted desired location, using a squeegee, rub the rest of the decal onto the surface. Make sure to go from the center to the edge to get out any trapped fluid and air bubbles. 

Click on the link below to go to our store...

www.stores.ebay.com/Dizzy-Dezigns  

Powered by eBay Turbo Lister