**NOW WORKS WITH IPHONE/ITOUCH**

Also available is the mirosoft zune aux input kit. Click here to go check it out.

This auction is for a Brand New Ipod cable. This cable provides Audio from any of the following iPODS: MINI, G3, G4,G5, NANO, VIDEO, COLOR, PHOTO to your factory radio system. Also charges the ipod when the cable is pluged into a power port (cigaratte light). This cable plugs into the bottom of the ipod (see picture below of ipod kits install. 

 Why this cable is better then others out there-

-Charges the ipod- Others sellers on ebay sell a 3.5 male to 3.5 male that plugs into the head phone jack on the ipod. These cables do not charge the ipod. So if you go on a road trip your ipod will run out of juice.       

-Better Sound Quality- The problem with runing out of head phone jack is that the head phone jack is a amplified output and when you plug it into your factory radio though a 3.5 to 3.5 cable, you get a lot of sound distortion. Are cable gets the audio from a low voltage source of the bottom of the ipod giving your factory radio a clean non amplified steam of audio that can then be amplified by your factory radio. Giving you better sound quality.          

-Plug and play no wires to Cut and Rewire. Just plug are cable into the bottom of the ipod, a power port and the front of your factory radio.

-One other way to add a ipod to your factory radio is a Fm Transmitter. These broadcast the signal out into the air then your radio picks it up like a radio station. The problem is these are not a wire connection. So most of the time you will get interference. Hands down this cable bets a fm Transmitter.

-Cable will also provide you with a video output. If you have a factory navigation Radio and would like to watch your ipod music videos then this will allow that to happen ( some radios may require additional parts, email for details).

How to make sure this cable will work with your factory Radio-

Your radio needs to have a 3.5mm Input Jack. Here are of pictures of some of the factorys radio that it will work on below. Use them to determine if this cable will work or not.

Picture Below is of a 2007 Cadillac Srx with this same ipod harness installed. Yes I know it is not a ford, but will help you get the concept of how it works. The only difference is the location of the aux input is in the center console not on the front of the radio.