DART IRON EAGLE PLATINUM CHEVY HEADS SBC:eBay Motors (item 370286092055 end time Nov-15-09 11:53:26 PST)


Bidding has ended on this item. The seller has relisted this item or one like this. Item:DART IRON EAGLE PLATINUM CHEVY HEADS SBC View relisted item

Item Specifics

Part Brand:	DART	Placement on Vehicle:	--
Manufacturer Part Number:	WINNERS CHOICE	Surface Finish:	--
Interchange Part Number:	--	Warranty:	Yes
Other Part Number:	--	Condition:	New

Performance Engine and Machine

Visit my eBay store

This auction is for a PAIR of fully assembled Dart Iron Eagle Platinum small block Chevy cast iron cylinder heads finish machined and assembled by PERFORMANCE ENGINE AND MACHINE with quality PBM and Erson components. Winners choice of any of the following. 180cc (the 180 is not a true platinum but same price), 200, 215 or 230cc intake runner volume. Combustion chamber volume 49, 64 or 72cc. Choice of straight or angled spark plugs. The heads have an extra thick deck, hardened exhaust seats with manganese bronze valve guides. Five angle valve job on intake and full radius on exhaust. Heads are complete with PBM RACE SERIES stainless steel intake and exhaust valves. Assembled with K30 valve train kit including PBM steel retainers, PBM 7 degree locks, PBM positive steel jacketed viton valve seals, PBM 3/8 screw in studs and PBM 5/16 guide plates, 1.260 diameter Erson single valve springs with dampers having 100lbs @ 1.730. This combination will allow up to a .525" lift camshaft and also allows you to use stock rocker arms and standard length pushrods.

180 and 200cc heads have 2.02/1.6 valves, 215cc have 2.05/1.6 valves and 230cc heads have 2.08/1.6 valves.

These heads are finish machined, cleaned and assembled by us at our shop complete and are ready for installation!!

Springs and retainers can be upgraded for an additional charge to match your cam and application.

K32 kit with 1.26 dia. single valve springs having 110lbs@1.800 and +.100 Race series valves allowing hyd. flat tappet cams to .600 lift add $10.00USD

K31 kit with 1.46 dia. single valve springs having 120lbs@1.800, chrome moly retainers and +.100 Race series valves allowing hyd. flat tappet cams to .600 lift add $65.00USD

K34 kit with double 1.460 dia. valve springs having 135lbs@1.800, chrome moly retainers and +.100 Race series valves and 7/16 rocker studs for mech. flat tappet or hyd. roller cams up to .600 lift add $85.00USD

K38 kit with double 1.500 dia. valve springs having 205lbs@1.850, chrome moly retainers and +.100 Race series valves and 7/16 rocker studs for mech. roller cams up to .670 lift add $100.00USD

K385 kit with double 1.550 dia. valve springs having 220lbs@1.950, chrome moly retainers with 10 deg. machined locks, +.200 Competition series valves and 7/16 rocker studs for mech. roller cams up to .720 lift and 7/16 rocker studs add $180.00USD

Titanium retainers add $150.00USD

During check out simply request an invoice with the desired Intake runner volume, combustion chamber size, straight or angled plugs and valve train kit from above.

If you have any questions feel free to call us... 608-836-8130

Castings are in stock and ready to be assembled for your application. Dont pass up these great deals on new Platinum series heads.

THESE ASSEMBLIES ARE BUILT WITH TOP QUALITY NEW CASTINGS, NEVER SECOND OR BLEMS.

For more pictures and information on this item please visit link below:

http://WWW.PERFENGINE.COM/ironeagle.htm

00110

Return policy

Item must be returned within	Refund will be given as	Return policy details
7 days after the buyer receives it	Money Back	Item must be returned in as new condition in original packaging at buyers expense.

Payment details

Payment method	Preferred/Accepted	Buyer protection on eBay
	PayPal Preferred	Pay with and your full purchase price is covered \| See terms

Seller's payment instructions

Request an invoice with the desired Intake runner volume, combustion chamber size, straight or angled plugs and valve train kit.

Interested in buying this item? Use this checklist to help you make a safe and successful purchase.

Buyer checklist

Contact the seller

Read the seller's description carefully and contact the seller with questions before you make an offer or place a bid. Look for the "Ask seller a question" link at the top of the listing.

Make sure it fits

Double-check the seller's description to make sure this part fits your vehicle. We also recommend contacting the seller to confirm that this item is compatible with your vehicle.

Review the seller's feedback and DSR scores

The seller's feedback rating is a valuable tool to learn about the positives and negatives of a seller's transactional history. When buying an item, look for a seller with positive feedback and take the time to read comments from other buyers to get a sense of the seller's reliability.

Estimate shipping or transportation costs

Please keep in mind that parts and accessories tend to be bulkier or heavier than other eBay items and may cost more to ship. If the seller isn't local, review or calculate how much it will cost to ship or pick up the item in Shipping.

Review eBay's buyer protection policy

Pay with PayPal and get free buyer purchase protection. See details.

About eBay \| Community \| Security Center \| eBay Toolbar \| Buyer Services \| Policies \| Government Relations \| Site Map \| Help



© 1995-2009 eBay Inc. All Rights Reserved. eBay and the eBay logo are among the registered trademarks of eBay Inc. Kelley Blue Book® and Blue Book® are registered trademarks of Kelley Blue Book Co., Inc. Other trademarks and brands are the property of their respective owners. Some automotive images © eVox Productions LLC, all rights reserved. Use of this Web site constitutes acceptance of the eBay User Agreement and Privacy Policy.