MIXING RATIOS

Thoroughly mix two parts 50250ZP HS Clear in gallons or 50251ZP HS Clear in quarts, with one part 50252ZP HS Clear Activator. For even better spray-ability, 2:1 mix may be reduced with a urethane-grade reducer or other appropriate solvent product. Doing this will improve the flow and leveling. Eastwood suggests using a Zero-VOC reducer to avoid potential compliance issues.

A Fish-Eye Eliminator designed for use in urethane products may be added if needed. Follow additive manufacturer’s recommendation for specific mixing instructions.

Use caution in mixing materials as HS Clear may begin to gel after approximately two hours (at 70 °F).

SPRAY GUN SETUP

APPLICATION INSTRUCTIONS

Apply Eastwood HS Clear in two medium wet coats, with a 10-minute flash period between each. Clear should be dry to the touch within 10 minutes, and will be tack-free within three hours (at 70 °F). Do not recoat between one and eight hours after previous coat. Additional coats may be applied after eight, but before 18 hours (at 70 °F) have passed from completion of previous coat.

For increased depth and gloss, well cured clear may be wet sanded and recoated with one to two additional wet coats. Please read product label for safety precautions.

POLISH

Imperfections in the surface may be cut out of Eastwood’s HS Clear with 1500 grit sandpaper after at least eight hours. Follow with 2000 grit sandpaper to remove 1500 grit sand scratches followed by compound and finishing system to restore gloss.

For more colors, paint guns and painting accessories - Click Here