| | |
|
This listing has ended. The seller has relisted this item or one like this. Item:Face Gauge Honda CBR 900 CBR900 98 - 99 Blue |
The seller of this item is away until December 4, 2009. You may purchase this item, but there may be a delay in processing your order. |
|
| ||||||||||||||||||||||||||||||||||
| Brand New!! 1 X Face Gauge that fits CBR900 98-99 Blue We have: MPH Let us know which one you want when winning item!!! Installation instructions: 1. Remove your gauge panel. 2. Unscrew the Phillips screws on the back. 3. Open the gauge case. 4. Push your needle clock way (let the needle stop by itself). 5. Mark the stop position of the needle on the inside panel of the gauge. 6. Put some tape to protect the stock face plate. 7. With a flat screwdriver pull the needle out. 8. With a small Phillips screwdriver remove the two Phillips screws. 9. Place the stock face on a table and press out the needle stopper. 10. Re-install the new face gauge. 11. Push the needle back in place, remember the mark that you left before on the gauge, if it is not correct you use that mark for starting point. 12. Sometimes when your gauge are in place your needle can be wrongly set up. If it happens, you must re-open your gauge and place your needle back. I recommend that you plug your gauge before re-installing completely your gauge assembly. Just a simple thing to save you ½ hour of precious time. We are not responsible if you break something when installing your gauges!!!!
Powered by eBay Turbo Lister | ||||
Shipping and handling Item location: Saint-Paul, Quebec, Canada Shipping to: Worldwide
 
*The estimated delivery time is based on the seller's handling time, the shipping service selected, and when the seller receives cleared payment. Sellers are not responsible for shipping service transit times. Transit times may vary, particularly during peak periods.
| ||||||||||||||||
Return policy
| |
Payment details
Seller's payment instructions | ||||