Brand New complete injector  installation kit for Ford or International 6.9L and 7.3L diesels. Includes the items listed below: (Note: This kit is for installation of an injector set only - we have another kit in our Ebay store for a few dollars more that also provides a few more parts for installation of the injection pump as well.)

• Roll of cloth braided return line
• Return line clamps
• Plastic return line fittings for all injectors
• O-rings for above fittings
• Return line clamps
• Copper tip washers for injectors

If you are having problems with leak-back over night causing long crank times in the morning (not to be confused with glow plug problems which will go away if you plug in the block heater), this kit will solve the number one cause which is small leaks on the return lines.

NOTE: There are two different return cap designs used on these engines. The EARLY design has the return line in the center of the cap and uses 3/16ths inch return lines, while the LATE design has the return fittings at the edge of the cap and uses 1/4 inch lines. Generally the early design was used from 1983 to mid 1991, while the late design was used from mid '91 to 1994. However, if your engine was changed at some point, this may not be accurate, so it is best to visually verify. See picture below for explanation. This listing is for the EARLY style. If you need the late style, just go to our Ebay store by clicking here and then look for the 7.3L injector installation kit.

Thanks for looking, please visit our Ebay store and add it to your favorites as well as stopping by our "about me" page!

After purchasing, pay instantly with your credit card through PayPal!

In addition to Paypal, we also accept credit cards directly at our website - Just follow this link after your purchase: http://www.accuratediesel.com/shop/135.html Thank you