This is the only product that will revive faded gelcoat without spending hours buffing or rubbing.

Plus you get maximum shine and UV protection that will last for years to come.

PRESTO!™
Gelcoat Rejuvenator Freatures

EBAY TESTIMONIAL:

I have never contacted someone before to tell the how good or bad their product was. It’s just not me, but I am so astonished how well this stuff works. I have a red 272 formula and in minutes it made the damn thing look brand new. I have already called all my boater friends. You HAVE to get this stuff in marinas across the country. This product is way too good for people to not know about. I am going to bring some to my local marina to show how good it works. Thanks for saving me a weekend of buffing and waxing.

                                                            teamwoody72

"I recently used the gelcoat rejuvenator on my faded 20 foot boat and I simply cannot believe the results.  I only wish I had found this product before I spent an entire weekend compounding and waxing the other side with poor results.  You should consider me to be your "new" salesmen in New York.  I am going to be telling everyone at my marina about this awesome product! It's a life saver!  I have enclosed some photos of my boat."

--Mike Islip, Terrace NY

How It Works...

Hardened bits of PRESTO!™ can be removed and discarded without causing problems with the remaining liquid product.

Also Use PRESTO!™
Gelcoat Rejuvenator
For Minor Scratch, Scuff and Fade Damage on your boat AND your car!

Note: If the damage is so severe that the color is missing, the color must be repaired before using PRESTO!™.

1. Work in the shade if possible. This minimizes the possibility PRESTO!™ solidifying quickly in reaction to sunlight.
2. Wash & dry damaged area thoroughly. Pay attention to remove marring and foreign material on the damaged area.
3. SPARINGLY dab a SMALL amount of PRESTO!™ on to a clean disposable cotton cloth or non-abrasive paper towel and recap the container to keep it from reacting to the sun.
4. Wipe PRESTO!™ in the direction of the scratch or scuff to work the liquid into the grooves of the scratch/scuff. Keep spreading PRESTO!™ until the surface no longer looks streaked. Don't worry, you can't complete remove PRESTO!™ by simply wiping away excess product. Turn cloth to remove excess PRESTO!™ until the area does not look 'greasy'.
5. You can use your car immediately, however, protect the repair from rain, snow or sleet for 24-48 hours. NOTE: SUNLIGHT IS REQUIRED FOR CURE. Though it may feel dry to the touch in seconds, PRESTO!™ will be fully cured in 4 to 24 hours depending on degree of sunlight available for curing.
   
   Note: treated severe scratch/scuff damage may accumulate dirt with time. Washing your car will remove the dirt. If desired, repeated applications of PRESTO!™ may be used to gradually fill scratch/scuff damage. Allow PRESTO!™ to cure several hours before reapplication to form excellent intercoat bonding.
   
   The PRESTO!™ treated area can be re-painted. Simply follow normal surface preparations i.e. scuffing/sanding before painting.
   

Disposal Directions

Simply expose application rags or paper towels to sunlight or expose the PRESTO!™ container to sunlight until dry and cool.

CAUTION: :Large amounts of liquid PRESTO!™ can generate a lot of heat and become VERY HOT when exposed to sunlight.

Dispose of cool, solidified PRESTO!™ as non-hazardous, solid waste.

To learn more about automotive applications, please see my other auctions! 

How Much Will PRESTO!™ Cover?

One fluid ounce of PRESTO!™ will cover up tp 100 square feet. Here's how ounces it will take to do different sized cars, SUV's, boats, RV's, and aircraft.