| Product Footnotes: |
|
| 1. 3" stock converter |
51. Wont fit on the Limited models |
| 2. Exit is straight out the back |
52. Wont fit heavy duty suspension |
| 3. Flange connection to the converter |
54. Wont fit with trailer hitch |
| 4. Wont fit with fuel tank mounted in rear center frame |
56. 2WD only |
| 6. Wont fit 90-91. Muffler in front of the converter |
57. Exits in front of rear tire |
| 7. 3" stock mandrel-bent tailpipe |
59. Z85 suspension |
| 8. Minimum welding required |
60. ZQ8 suspension |
| 9. May not work with trailer hitch |
61. Sport suspension |
| 10. 2.5" single stock converter |
62. 4WD must remove spare tire |
| 11. Muffler kit only. Stock muffler is in front of converter |
63. Wont fit with a rear sway bar |
| 12. Wont fit with two converters |
64. Must remove spare tire if larger than 16" |
| 13. Muffler, tailpipe, stainless tip only |
67. Kit comes with 3.5" stainless tips |
| 14. Wont fit on 96-97 new body style |
68. Kit comes with 4" stainless tips |
| 15. Wont fit if passenger shock is behind the rear axle (94) |
69. Will not fit with Reload Leveling Suspension |
| 16. Stock two converters |
70. 1-3/4" tailpipe |
| 19. Slip connection to converter |
71. 2-1/2" tailpipe |
| 20. Stock single converter |
72. 3" tailpipe |
| 23. Universal kit-mods may be needed |
73. Wont fit with a 5th wheel trailer hitch |
| 24. 2.5" single kit with 3" stainless tip |
74. Wont fit 97-98 model with welded hanger on stock tailpipe |
| 25. Short bed-head pipe requires cutting |
75. Wont fit on a lifted vehicle |
| 27. Exhaust exit is on the driver side |
76. 2-1/4" tailpipe |
| 28. Wont fit late model 93 with 3" converter |
77. 4 tailpipe & 5" stainless tip |
| 29. Kit comes with 3-1/2 round stainless tips |
78. Stock 2-1/4 converter |
| 35. Shock in front of rear tire |
79. Includes 3.5 downpipe |
| 36. Shock behind rear axle |
80. 3 stainless tip |
| 37. Stock dual inlet muffler |
81. Wont fit with factory ground kit |
| 38. Stock single inlet muffler |
82. System may exceed 95 decibels |
| 39. Tailpipe exits behind psgr rear tire |
83. Includes 4 downpipe |
| 40. Wont fit heavy duty truck |
84. Must remove spare tire if 20 and above |
| 42. Old body style |
87. Manufactured after 8/04 |
| 45. Dual inlet-slip flange |
88. Manufactured before 8/04 |
| 46. Dual inlet-welded 3 bolt flange |
89. Manufactured 8/04-8/23/04 |
| 48. Has a stock rear sway bar |
90. Has no heatshield |
| 49. Resonator included in kit |
91. Has a heatshield |
| 50. Wont fit on ZR2 models |
|