NEW

Outdrive / Gearcase

 Pressure / Vacuum Test Kit

This is a great little kit for testing the seals in your outdrive or outboard gearcase. This kit does it all - pressure and vacuum.

Defective, worn out seals can be detected before water enters the gearbox and causes damage and expensive repairs. If a leak is detected, the pressure will force air or oil from the outdrive showing you the faulty seal.

The test procedure is simple and can be performed by an amateur or pro.

This tester fits Mercruiser Pre Alpha and Alpha from the 1960's to present and Bravo 1, 2, & 3. OMC, Volvo, Mercury, Evinrude, Johnson, Honda (70 - 90hp), Force, and Gamefisher.

Note: For Alpha 2 Gen 2, Bravo 1, 2, & 3, or any outdrive using a transom mount oil reservoir (burp bottle), the bottle must be disconnected before testing on the boat.

This tester can be used with the outdrive / outboard on the boat or in the shop.

The 3/8 x 16 thread will also fit many models. 

Please check the threads with a 3/8 x 16 coarse bolt.

Additional thread sizes on request. Just email your size.

The standard tester will only test OMC / Volvo from the drain hole which can be messy due to residual gear lube. To test from the larger dip stick hole, I offer an adapter on another auction. Please visit.

I also have adapters for all models including metrics.

Ships with full testing instructions and a spare O-ring.

All fittings are aluminum or brass and will not rust. Large 2 inch gauge for ease of use. Kit includes: compound tester, pressure / vacuum pump, carrying case and blade screwdriver to remove the drain and vent plug.

A few strokes on the pump are all you need to reach testing pressure or vacuum. The air chucks are built into the pump.

Please see my other auctions. I offer a full line of testers. Pressure, vacuum, pressure / vacuum in kits or tester only.

Questions Welcome

Thanks

Tom

After purchasing, pay instantly with your credit card through PayPal!